INNR SP 242 User manual

Put Smart App in “search” mode.
SP 242
INNR IM SP 242 - 114 X 171- Pantone 276C
3 4 5
12

Important safety instructions
• Do not connect after each other in sequence.
• For indoor use only.
• Suitable for use with inductive loads, for example pumps > 2000 W.
• Do not disassemble the product; if any part is damaged, the product
should not be used.
• Do not immerse in water.
• For cleaning, use a dry, fiber free cloth, never a strong cleaning agent.
• To disconnect voltage, remove from mains.
• This product includes a timer function in combination with a smart app.
• Keep these instructions for future use.
Standby power: 0.35W
plug bridge app
++
Hereby, Innr Lighting BV declares that the radio equipment types SP 242 are in
compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following
internet address: www.innr.com/en/downloads
Frequency: 2.4 GHz (2400 ~ 2483.5MHz)
RF power: max. 10 dBm
Press and hold
www.innr.com
© 2023 Innr Lighting B.V.
INNR IM SP 242 - 114 X 171- Pantone 276C
Factory reset Pairingmode Manual ON / OFF
Declaration of Conformity
Great Britain Declaration of Conformity
Hereby, Innr Lighting BV declares that the radio equipment types SP 242 are in compliance
with the relevant statutory requirements.
The full text of the declaration of conformity is available at the following internet address:
www.innr. com/en/downloads
Frequency: 2.4 GHz (2400 ~ 2483.5MHz)
RF power: max. 10 dBm