InRoom Furniture K6420 User manual

NOTE TO CUSTOMERS:
For ease and speed of assembly we recommend that before you commence each step of the
assembly that you identify all the parts required to complete that step.
We recommend that where possible you allow sufficient space to assemble the item as close
as possible to the place where it will be once assembled.
For the protection of your furniture we recommend that the product is placed on a dry, soft,
smooth and clean surfaces during assembly to prevent any damage. Avoid damp and direct
sunlight.
During assembly do not over tighten the screws or bolts, as this may damage the product.
Please ensure you retain all the product packaging until the item is completely assembled.
Periodically check all fitting and re-tighten as necessary.
Never allow any liquids to remain on your furniture as absorption can cause the wood to warp
or finish to de-laminate.
It is recommended that this item should be assembled by two adults.
MODEL : #K6420 KITCHEN CART
PAGE 1 OF 3

Divider Panel Left
Back Rack’s Side Panel
Quantity: 1
Side Panel Right Top Panel Base Panel Middle Shelf Panel
TOOLS REQUIRED
MALLET
1 1
ITEM: #K6420 - KITCHEN CART
11
Front Rack’s Side Panel Upper Back Panel
8 pcs
Metal Rod
PAGE 2 OF 3
STEP 1
STEP 2
STEP 3
STEP 4
1
Lower Back Panel
11
123 4 5
6 7 89
Lower Shelf Panel
1
10
Pull-out shelf Panel
Quantity: 1
Left Door Right Door
1 1 1
11 12 13 14
A
20 pcs
16 pcs
Wooden Dowel M8 x 25
Ø 5/16”
D
Connecting Bolts B
8 pcs
Camlocks D15 x 12.5mm
C
E
FG
16 pcs
HSlide’s Screw M4 x 12
20 pcs
Pan head Screw M3.5 x 12
for Castors
15/32”
Ø 5/32”
Ø 9/64”
IJ
4 pcs
2 pcs
K
Door Pull
2 pcs
LDoor Catcher
2 pcs
MCatcher plate
2 pcs
N
Door’s Pivot Hinge
O
Shelve Support Pin
4 pcs
Q
Sticker
8 pcs
21/32”
Ø 9/64”
1
1
1
2
2
5
5
67
3
D
HH
M
A
II
Castor Wheel with Lock
2 pcs
Castor Wheel
3 pcs 1 set
Drawer Slide
15/32”
Pan head Screw #6 x 16.5
4 pcs
P
2nd
hole
2nd
hole
Spice Rack’s Shelf

ITEM: #K6420 - KITCHEN CART
1
5
5
10
13
10
Align the Camlock ‘B’ & turn
it to locked position when
it is connected to the bolts.
PAGE 3 OF 3
STEP 6
4
STEP 8
STEP 9
STEP 10
STEP 13
2
2
C
STEP 5
C
6
6
J
K
I
N
L
O
7
7
5
10
7
9
Slide in the Lower Back Panel ‘9’,
and then, attach the Base Panel‘4’.
4
E
F
G
G
1
2
P
12
13
TOP
BOTTOM
1
8
Align the
Camlock ‘B’ &
turn it to
locked
position when
it is connected
to the bolts.
STEP 7
STEP 11
STEP 12 STEP 14
2
3
B
C
Q
6
7
B
1
6
7
11
I
H
3rd
hole
11
14
12