Ins'Tent VITABRI Canopies AIR TENT Manual

• Always stake or weight down your Air Tent.
• DO NOT use, set-up or leave your Air Tent in any potentially harsh
weather conditions such as: windy weather, rain, hail, sleet, snow,
drizzle, lightning etc.
• Ins’Tent tents are designed as temporary shelter.
• Do not leave your Air Tent unattended.
• Keep all flame and heat sources away from fabric roof and walls.
• Keep your canopy o of steep slopes and inclines.
• Make sure the Air Tent is completely dry before storing it.
• Never wash the Air Tent top and walls in a washing machine.
• Do not use detergent to clean your Air Tent.
AIR TENT • Set Up Instructions
To clean your top and frame we recommend
using a soft brush with mild soap and water.
Make sure to let your Air Tent air dry before
storing away.
IMPORTANT: Read this information before proceeding. Not complying with these warnings will void
your Ins’Tent warranty. It is the user’s responsibility to take the following precautions at all times.
INSTRUCTIONAL CONTENTS
Items in your Packaging
Cleaning & Care
A. Adding your top
B. Inflating your Air Tent
C. Taking Down your Air Tent
Ins’Tent Industries • Custom Tents & Displays • 714.842.7500 • [email protected] • Instent.com • 5402 Research Dr. Huntington Beach, CA 92649
CLEANING & CARE
ITEMS IN YOUR PACKAGING
For More Information & Instructional Videos Visit Our Website at Instent.com/support
Verify that you have the following items:
1. Air Tent Frame
2. Air Tent Top
3. *Wall - Optional
4. Air Tent Storage Bag
5. Stakes Kit
6. Electrical Air Pump
SAFETY
1
2
3
4
56

Step 4
Start at the peak and begin to roll your top.
Step 3
Align the legs one on top of each other.
Make sure that the legs are straight and
not twisted.
Step 5
Store it in the storage bag provided until
your next event.
Step 2
Locate the air valves on each leg and insert
them through the openings of each leg corner
on your top.
Step 1
Find a clean area away from any debris or
sharp objects before setting up your Air Tent.
Begin by spreading your Air Tent’s frame and place
the top above the frame so it aligns with each leg.
Step 3
Align the hook and loops on the frame to
the top and connect them to secure your
top onto the frame.
Step 2
Release all the black air valves from each leg and
let the air out.
Step 7
Secure your tent by adding sand bags to the pockets
in each leg corner or by staking it to the floor.
Step 1
You do not need to remove your top from
your tent.
Remove the weights or stakes from your Air Tent.
Step 4
Verify that all your air valves are closed except
for the one you will be using. Use your electrical air
pump and begin inflating your Air Tent.
Step 5
When your Air Tent begins to rise, turn
o your pump and go the center of your
tent and lift it up.
Step 6
Finish inflating your Air Tent. Once it is firm,
close your valve.
C. TAKING DOWN YOUR AIR TENT
Ins’Tent Industries • Custom Tents & Displays • 714.842.7500 • [email protected] • Instent.com • 5402 Research Dr. Huntington Beach, CA 92649
Air Tent - Set Up Instructions
A. ADDING YOUR TOP
B. INFLATING YOUR AIR TENT