Inseego BPC100 User manual

Note: Never place a USB-based device into the power connector port of the BPC100.
Doing so may damage the device and negate its warranty.
About your BPC100
Rear View Top View
No. Item No. Item
1 External Antenna Connector 1 4 Alarm Port
2 Power Connector Port 5 Phone/Fax Port
3 Ethernet Port 6 External Antenna Connector 2
No. Item
1 BPC Battery Cover
23 AA Backup Batteries
3 Reset button
1 2 3 4 5 6
1
2
3
Meet your
BPC100.
© 2020 Inseego. All Rights Reserved
PN 90027151 Rev 5

Step 2: Install backup batteries for use during power outage
1. Open the
battery cover.
2. Insert three (3) AA
batteries.
3. Close the
battery cover.
Step 1: Transfer your phone number
Please read the following if you are transferring your phone number from
a different provider.
Note: Customers transferring in their business number will not be able to make or receive calls
on the BPC100 until the transfer process is completed. The transfer process can take 2 – 10
business days. Check the status of your transfer by visiting verizonwireless.com/LNP or by
calling (888)-844-7095.
Note: The telephone and telephone cord are not included.
Step 5: Turn on your BPC100
Press the Power button on the front of the device to turn on the BPC100.
The power indicator will be green when device is turned on.
Important
Please make sure your BPC100 is located in an area of your business that
receives a strong wireless signal.
Optional: Install the antenna
To increase signal strength, you can install the two (2) antennas included.
1. Align antennas with the antenna ports and screw securely into place
2. Restart the BPC100 after the antennas are inserted or removed.
Step 4: Connect your telephone to the BPC100
The BPC100 provides one port for either a telephone or fax machine.
1. Unplug telephone that you want to use with the BPC100 from the wall
telephone jack.
Warning:
If your existing phone has rotary or pulse dialing, it will not work with this product.
2. Plug the end of your telephone cord into the telephone port on the
back of your BPC100 (the other end of the cord must remain plugged
into the back of your telephone base unit).
3. For best results, place on a firm, flat surface. If BPC100 needs to be
mounted on a wall, please use double-sided mounting tape.
Setting up your BPC100
Your BPC100 comes with the SIM card installed.
Step 6: Make calls
1. Before making a call, please listen for a dial tone on your telephone. If
the indicator light on your BPC100 is blinking red, move the BPC100 to
a location that receives a signal or try installing the optional antenna
for greater signal strength.
2. Place a call to start using the service.
Important
Customers may need to use the three-digit area code when dialing local
and long distance numbers.
Find more information
• For additional information and technical support, the visit the Verizon
online support web page at http://Verizonwireless.com/support.
If you still need help, visit any Verizon Wireless store or contact
Customer Service at 1-800-922-0204.
• For additional information and technical support, contact Inseego
online support web page at https://www.inseego.com/ contact or by
calling [phone] Option 2.
Go to http://my.bpc100 for additional information on BPC100 settings
and software updates.
The BPC User Guide can be found at:
https://www.inseego.com/support-documentation/
•
Step 3: Install the power adapter
1. Insert the power adapter into the power connector port.
2. Plug the power adapter into a wall outlet.