Insignia NS-AC1200-C User manual

Voltage selector
Power
indicator
Power cord
USB port
Tips
Connector
FEATURE
CHOOSING A TIP
Carefully test the tips by gently inserting them into the DC jack of
your device. Choose a tip that ts snugly, but do not force it to t.
Note: If you have your old adapter, you can compare the connector of the
old adapter to the available tips.
PACKAGE CONTENTS
• Universal AC adapter
• Adapter tips (7)
• Quick Setup Guide
QUICK SETUP GUIDE
1,300 mA Universal
AC Adapter
NS-AC1200 / NS-AC1200-C
POSITIVE POLARITY ONLY
Before using your new product, please read these instructions to prevent any damage.
SETTING UP YOUR ADAPTER
Using DC tips
You can nd your device’s input, polarity, and voltage on the
device itself, on its old adapter, or in its manual. Contact the
manufacturer if you cannot nd this information. Using
incorrect settings could damage your device.
1Check the input of the device you are connecting to your
adapter. Do not use this adapter if your device requires more
than 1,300 mA (1.3 A) of current.
2Check the voltage of your device, then slide the voltage
selector on your adapter to the same voltage. Do not use this
adapter if your device’s voltage is not between 3 and 12 V DC.
3Check the polarity of the device you are connecting to your
adapter.
• If your device has a positive polarity, connect the chosen tip
to the adapter’s connector.
• If your device has negative polarity, do NOT use this adapter
to power your device.
USB connections
Select 5 V on the Voltage Selector, then plug a USB cable into
the USB port on the adapter (up to the 2.1 A rating).
Note: You can't use the DC connection at the same time.
Included Tip Dimensions:
2.5 (OD) × 0.75 (ID) × 10.5
+
0.5 (L)
3.0 (OD) × 1.10 (ID) × 11.0
+
0.5 (L)
3.5 (OD) × 1.35 (ID) × 11.0
+
0.5 (L)
4.0 (OD) × 1.70 (ID) × 11.0
+
0.5 (L)
5.5 (OD) × 1.50 (ID) × 12.0
+
0.5 (L)
5.5 (OD) × 2.10 (ID) × 12.0
+
0.5 (L)
5.5 (OD) × 2.50 (ID) × 12.0
+
0.5 (L)
OD = outer dimension
ID = inner dimension / L = length
COMPATIBILITY
Your device is compatible with this adapter if:
• The correct tip is available
• Your device’s voltage is between 3 and 12 V DC
• Your device’s input does not require more than
1,300 mA (1.3 A) of current (for DC tips)
• Your device’s input does not require more than
2,100 mA (2.1 A) of current for 5 V (for USB connection)
• Your device has a positive polarity
Not compatible with computers, monitors, home
theater systems, and other high-current devices.
Contact the manufacturer to obtain the correct
replacement power supply.

BE
CAREFUL!
USING YOUR ADAPTER
Warning: If your device does not work, immediately unplug the adapter,
then check the voltage and polarity settings. Do not attempt to power
multiple devices at the same time through the tip and USB connections.
• Connect the adapter to your device, using one of the available
DC tips, then connect it to a power outlet. Use or charge your
device as usual.
OR
• Connect a USB charging cable from the adapter to your device,
then connect the adapter to a power outlet. Use or charge your
device as usual.
TROUBLESHOOTING
My device isn’t working.
• Immediately unplug the adapter.
• Check the polarity of your device. If your device has a negative
polarity, do NOT use this adapter.
• Make sure that your device requires less than 1,300 mA (1.3 A) of
current (or 2,100 mA (2.1 A) for 5 V, 2.1 A USB connection).
• Make sure that the voltage selector is set to the correct voltage.
• Make sure that you have selected the correct tip.
• Do not connect a device to the USB port and tip at the same
time.
My adapter is hot.
• It is normal for an adapter to feel warm during use. Make sure
that it is placed in a well-ventilated area.
• If your adapter feels abnormally hot, check your adapter’s
settings and make sure that it is compatible with your device.
SPECIFICATIONS
• Cable length: 4.9 ft. (1.5 m)
• Input: 120 V AC
• Output: 3, 4.5, 6, 7.5, 9, or 12 V DC 1,300 mA (1.3 A), or 5 V, 2.1 A
LEGAL NOTICES
FCC Statement
Caution: Changes or modications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1)This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Canadian Notice
CAN ICES-3 B/NMB-3 B
V3 ENGLISH 20-0253
Check out these important safety
instructions to keep yourself and your
devices safe.
Warning: Identifying the correct voltage and polarity settings and
adjusting the product is the user’s responsibility.
• This adapter should only be used with a 120 V power outlet.
Follow all necessary safety precautions.
• Not recommended for use by children.
• Failure to adjust the adapter settings to match your connected
device’s requirements can result in damage to the device.
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2020 Best Buy. All rights reserved.