Insignia NS-DPF10WW-17 User manual

Before using your new product, please read these instructions to prevent any damage.
USER GUIDE
10" Digital Photo Frame
with Premium IPS Panel
NS-DPF10WW-17

www.insigniaproducts.com
2
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Back view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Side view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Setting up your digital photo frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Setting up the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Setting up the photo frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Hanging the photo frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Using the digital photo frame menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Playing a slideshow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Playing an instant slideshow from a memory card or USB device. . . . .18
Manually playing a slideshow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Using the Clock/Calendar view screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Maintaining your digital photo frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Cleaning your digital photo frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Replacing the remote control battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
ONE-YEAR LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Introduction
Congratulations on your purchase of a high-quality Insignia product. Your new
digital photo frame is designed for reliable and trouble-free performance.

3
10" Digital Photo Frame with Premium IPS Panel
www.insigniaproducts.com
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, basic precautions should always be followed to
reduce the risk of fire, electric shock, and injury to persons, including the
following:
1Read all instructions before using this device.
2Heed all warnings.
3Follow all instructions.
4Do not use this device near water.
5Clean only with a soft cloth.
6Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
7Do not defeat the safety purpose of a polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.
8Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the appliance.
9Do not attempt to modify or extend the power cord of this device.
10 Unplug this device during lightning storms or when it will not be used for long
periods of time.
11 Make sure that the available AC power matches the voltage requirements of
this device.
12 Do not handle the plug with wet hands. This could result in an electric shock.
13 Do not turn the device on or off by plugging or unplugging the power cord.
14 Turn off the device before unplugging it.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates that
dangerous voltage constituting a
risk of electric shock is present
within your digital photo frame.
This symbol indicates that there
are important operating and
maintenance instructions in the
literature accompanying your
digital photo frame.

4
NS-DPF10WW-17
www.insigniaproducts.com
15 Refer all servicing to qualified service personnel. Servicing is required when
the device has been damaged in any way, such as the power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
appliance, the appliance has been exposed to rain or moisture, does not
operate normally, or has been dropped.
16 To reduce the risk of fire or electric shock, do not expose this device to rain,
moisture, dripping, or splashing, and no objects filled with liquids should be
placed on top of it.
Features
• 10.1" LED backlit TFT LCD display
• Premium IPS panel for accurate, natural colors and a wide viewing angle
• 16:9 wide-screen aspect ratio
• 1024 x 600 resolution
•SupportsJPEGimageformat
• Slideshow mode
• Scheduled on/off
• Built-in media reader, with support for SD/MMC/MS memory cards
•USBflashdriveport
• Calendar and clock functions
• Landscape and portrait wall mounting holes
• Espresso finish wood design
Package contents
• Digital Photo Frame
•Poweradapter
• Remote control
•Stand
• User Guide

5
10" Digital Photo Frame with Premium IPS Panel
www.insigniaproducts.com
Back view
# ITEM DESCRIPTION
1 Landscape mounting
holes
Hang your photo frame on the wall horizontally with nails
or screws (not included).
2 Portrait mounting
holes
Hang your photo frame on the wall vertically with nails or
screws (not included).
3 , , ,
(navigation) buttons
Press to navigate the on-screen menus.
When viewing a picture, press right or left to view the next
or previous picture.
4OK Press to select the highlighted option or to pause and
resume the slideshow.
5M(menu) Press to go to the main menu.
6ON/OFF switch Slide to turn your digital photo frame on or off.
7 Stand lock Turn the stand to LOCK to display in a landscape or portrait
view.
Turn the stand to UNLOCK to remove the stand and hang
your digital photo frame on the wall.

6
NS-DPF10WW-17
www.insigniaproducts.com
Side view
# ITEM DESCRIPTION
1 USB port Plug a USB flash drive into this slot.
2 SD memory card slot Plug a memory card into this slot. Your digital photo frame
accepts:
•SD™/SDHC™
• MultiMediaCard™ (MMC)
• Memory Stick™ (MS)
• Memory Stick PRO™ (MS PRO).
3 DC in jack Plug the power adapter into this connector.
USB
DC IN 5V
SD/MMC/MS

7
10" Digital Photo Frame with Premium IPS Panel
www.insigniaproducts.com
Remote control
# ITEM DESCRIPTION
1 MENU Press to display the Main menu.
2 SLIDE SHOW Press to start a slideshow.
3 ENTER Press to select the highlighted option or to pause and
resume the slideshow.
4 , , ,
(navigation/selection
buttons)
Press to navigate the on-screen menus.
When viewing a picture, press right or left to view the next
or previous picture.
In Slideshow mode, press to open a pop-up menu to
rotate, zoom, or delete an image.
Caution: If you select the delete option, the image is
permanently deleted from the memory card or USB flash
drive.
5 BACK Press to go back a screen in the on-screen menus.
6 ZOOM Press to zoom in on the image. Options include 125%,
150%, 175%, 200%, 225%, or 250%.
7 ROTATE Press to rotate the image. Options include 90°, 180°, 270°,
or 0°.
ENTER
ROTATE
ZOOM
SLIDE
SHOW
BACK
MENU
RM‐NSDPF10WW‐17
7

8
NS-DPF10WW-17
www.insigniaproducts.com
Setting up your digital photo frame
Setting up the remote control
• Remove the plastic tab that extends past the bottom edge of the remote
control. This tab protects the battery. The remote control will not work until it
is removed.
Setting up the photo frame
1Lay the picture frame face-down.
2Line up the arrow on the stand with the UNLOCK dot on the back of the photo
frame, and insert the stand into the grooves.
3Rotate the stand to LOCK the stand in a landscape or portrait view.
Portrait view
Landscape view

9
10" Digital Photo Frame with Premium IPS Panel
www.insigniaproducts.com
4Plug the power adapter into the frame’s DC IN jack and into an power outlet.
5Slide the ON/OFF switch to the ON position.
The photo frame comes preloaded with pictures. You can turn on the photo
frame and play back the preloaded demo pictures with no memory device
inserted.
6To play back your own pictures, insert a memory card or USB flash drive
containing pictures into the corresponding slot on the photo frame. Make
sure that the label on the memory card or USB flash drive faces the back of the
photo frame.
Caution: DO NOT remove a USB device or memory card while they are being
used by your photo frame. The USB device or memory card should only be
removed when the Main Menu screen is displayed (press the MENU button).
Doing so may damage the memory device or your photo frame.
USB
DC IN 5V
SD/ M M C/ M S
USB
DC IN 5V
SD/ M M C/ M S

10
NS-DPF10WW-17
www.insigniaproducts.com
Hanging the photo frame
1If the stand is attached, turn the stand to the UNLOCK dot and remove the
stand.
2Insert two nails (not included) into your wall, then align the photo frame’s
mounting holes with the nails to hang your photo frame.

11
10" Digital Photo Frame with Premium IPS Panel
www.insigniaproducts.com
Using the digital photo frame menus
1Slide the ON/OFF switch to turn the digital photo frame on. The menu opens.
If a memory card or USB flash drive is inserted, a slideshow of the contents
begins automatically.
2Press , , , to highlight your selection, then press ENTER to
confirm your selection. You can choose from the following options:
•Photo: Starts the slideshow or displays thumbnails of the images on the
media device. To change photo settings, see“Using the Photo Setup menu”
on page12.
•Calendar: Displays a calendar and clock. To change the calendar settings,
see “Using the Calendar Setup menu” on page14.
•Setting: Opens the Start Up Setting menu.
•STORAGE - View pre-loaded images stored in the internal memory of your
digital photo frame.
•CARD (SD/MMC/MS) - Access photos stored on a memory card.
•USB - Access photos stored on a USB flash drive.

12
NS-DPF10WW-17
www.insigniaproducts.com
The selected storage device displays the photos as thumbnails when you
select Photos and it is also the default slideshow device. To view pictures from
another device, select it from this menu.
Using the Photo Setup menu
1Slide the ON/OFF switch to turn the digital photo frame on. The menu opens.
2Press or to select Setting, then press ENTER. The Start Up Setting menu
opens.
Note: If a card or flash drive containing images is inserted into the frame, the
slideshow automatically starts after about eight seconds.

13
10" Digital Photo Frame with Premium IPS Panel
www.insigniaproducts.com
3Press or to highlight Photo Setup, then press ENTER. The Photo
Setup menu opens.
4Press or to highlight your selection, then press ENTER to confirm
your selection.
5Press or to change the settings, and press BACK to return to the
Photo Setup menu:
•Display Mode: Select the image Display Mode. Choose from Slideshow,
Thumbnail, or Browse Mode.
•Display Ratio: Select the image display size. Choose from Fit to Screen,
Crop to Fill, or Full Screen.
•Slideshow Duration: Select the duration of the slideshow. Choose from 5
sec, 15 sec, 30 sec, 60 sec, 5 min, or 15 min.
•Slideshow Repeat: Select the way the photos are repeated. Choose Once or
Repeat.
•Slideshow Effect: Adjust the transition effect between each image in a
slideshow. Choose from Random, S-curve, Partition, Erase, Blinds,
Random lines, Grid, Gross, Zoom, Spiral, or Close.
•Photo From: Select the memory source from which the photos are shown.
Choose All Dir or Current Dir.
•Photo Play Sequence: Select the order in which the photos are displayed.
Choose Random or Sequence.
6Press BACK repeatedly to leave the menus and return to photo Display
Mode.

14
NS-DPF10WW-17
www.insigniaproducts.com
Using the Calendar Setup menu
1Slide the ON/OFF switch to turn the digital photo frame on. The menu opens.
2Press or to select Setting, then press ENTER. The Start Up Setting menu
opens.

15
10" Digital Photo Frame with Premium IPS Panel
www.insigniaproducts.com
3Press or to highlight Calendar Setup, then press ENTER. The
Calendar Setup menu opens.
4Press or to highlight your selection, then press ENTER to confirm
your selection, or press BACK to return to the Setup menu:
•Display Mode: Change the Calendar Display Mode. Choose from: Monthly,
Calendar, and Clock.
•Date: Press to change the month, then press to move to the day field.
Press to change the day, then press to move to the year field. Press
to change the year, then press ENTER when done. Press or to select
another menu option.
•Clock Mode: Change the Clock Mode. Choose 24-hour or 12-hour.
•Clock Time: Press to change the hour, then press to move to the
minute field. Press to change the minute, then press ENTER when done.
Press or to select another menu option.
5Press BACK repeatedly to leave the menus and return to Photo Display
Mode.

16
NS-DPF10WW-17
www.insigniaproducts.com
Using the System Setup menu
1Slide the ON/OFF switch to turn the digital photo frame on. The menu opens.
2Press or to select Setting, then press ENTER. The Start Up Setting menu
opens.

17
10" Digital Photo Frame with Premium IPS Panel
www.insigniaproducts.com
3Press or to highlight System Setup, then press ENTER, or press
MENU.The System Setup menu opens.
4Press or to highlight your selection, then press ENTER to confirm
your selection or press BACK to return to the Setup menu:
•Language: Select the on-screen display language. Choose from English,
French, Spanish, or Portuguese.
•Brightness: Adjust screen brightness (from 1~16).
•Contrast: Adjust the screen contrast (from 1~16).
•Saturation: Adjust the screen color saturation (from 1~16).
•Auto Power On: Select if you want the photo frame to turn on at a specific
time. Choose On or Off.
•Auto Boot Time: Set the time you want the photo frame to turn on. Press
to change the hour, then press to move to the minute field. Press to
change the minute, then press ENTER when done. Press or to select
another menu option.
•Auto Power Off: Select if you want the photo frame to turn off at a specific
time. Choose On or Off.
•Auto Shut Time: Set the time you want the photo frame to turn off. Press
to change the hour, then press to move to the minute field. Press to
change the minute, then press ENTER when done. Press or to select
another menu option.
•Auto-Power Frequency: Select how often you want your photo frame to
turn on and off automatically. Choose from: Everyday, Weekday, Weekend,
or Once.
•Reset default setting: Select to revert to the original factory settings.
•Version: Press ENTER to display the software version number.
•System upgrade: Select this option to upgrade the system software, if an
upgrade is available. Check the Insignia website at
www.insigniaproducts.com for available updates.
7

18
NS-DPF10WW-17
www.insigniaproducts.com
Playing a slideshow
Playing an instant slideshow from a memory card or USB device
1Insert a memory card into the memory card slot or a USB flash drive into the
USB port.
A slideshow of pictures from the memory card or USB device automatically
starts to play. This may take a few seconds, depending on the number of
images on the card or flash drive.
2Press ENTER to pause the slideshow. Press ENTER again to resume
the slideshow.
3To change slideshow settings, see “Using the Photo Setup menu” on page 12.
Manually playing a slideshow
1Insert a memory card or USB drive into one of the available memory slots or
the USB port, or you can set up the slideshow to play from demo photos
stored on the digital photo frame itself. The menu opens.
2Press , , , to select from the available options (memory card, USB flash
drive, or onboard storage).
3Press SLIDE SHOW. A slideshow begins that displays the pictures contained
in the memory device you selected.
Caution: Memory cards fit into the card slots in only one direction. Do not force
a memory card into a slot. The card should fit snugly when inserted correctly.
Some cards require an adapter to fit correctly. For more information on
supported memory cards, see “Specifications” on page 22.
Notes:
• If a memory card is inserted, CARD changes to indicate the type of card in the
slot (for example, SD), which is highlighted.
• If a USB flash drive is inserted, USB is highlighted.
• The option to select a memory card or USB device is disabled if there is no
media of that type in the corresponding slot or port.

19
10" Digital Photo Frame with Premium IPS Panel
www.insigniaproducts.com
4In Slideshow mode, press to open a pop-up menu to rotate, zoom, or delete
an image.
5To change slideshow settings, see “Using the Photo Setup menu” on page12.
Using the Clock/Calendar view screen
1Slide the ON/OFF switch to turn the digital photo frame on.
-OR-
If viewing a slideshow, press MENU, then BACK. The main menu opens.
Caution: If you select the delete option, the image is permanently deleted from
the memory card or USB flash drive.

20
NS-DPF10WW-17
www.insigniaproducts.com
2Press , , , to highlight Calendar, then press ENTER to display the
calendar and clock.
3Press BACK repeatedly to leave the OSD menus and return to Photo
Display Mode.
Maintaining your digital photo frame
Cleaning your digital photo frame
Clean the outer surface of the digital photo frame with a clean, microfiber
cleaning cloth.
Replacing the remote control battery
1Squeeze the battery tray’s sides together and slide it out of the remote control.
2Remove the old battery and insert the new 3V lithium battery (CR2025) into
the battery tray. Match the polarity of the new battery with the plus sign (+) in
the battery tray.
3Slide the battery tray into the battery compartment until it clicks into place.
Note: To change the date and time settings, see “Using the Calendar Setup
menu” on page14.
Cautions:
• The battery should not be exposed to excessive heat, such as sunshine, heat
registers, or fire.
• Battery chemicals can cause a rash. If the battery leaks, clean the battery
compartment with a cloth. If chemicals touch your skin, wash immediately.
• Make sure that the battery is disposed of correctly. Do not burn or incinerate.
Notes:
• Remove the battery when the charge is depleted.
• If the remote control is not going to be used for an extended period of time, remove
the battery.