Insignia NS-DPF7WM-09 - Digital Photo Frame User manual

User Guide
7" Digital Picture Frame
NS-DPF7WM-09
08-1607 NS-DPF7WM-09 - ENG.fm Page -1 Thursday, August 28, 2008 11:40 AM

08-1607 NS-DPF7WM-09 - ENG.fm Page 0 Thursday, August 28, 2008 11:40 AM

NS-DPF7WM-09
1
www.insignia-products.com
NS-DPF7WM-09
Digital Picture Frame
Contents
Introduction. . . . . . . . . . . . . . . . . . . . . . . 1
Safety information . . . . . . . . . . . . . . . . . . 2
Features . . . . . . . . . . . . . . . . . . . . . . . . . 4
Setting up your frame . . . . . . . . . . . . . . . .11
Using your frame . . . . . . . . . . . . . . . . . . .13
Maintaining. . . . . . . . . . . . . . . . . . . . . . .36
Troubleshooting. . . . . . . . . . . . . . . . . . . .37
Specifications . . . . . . . . . . . . . . . . . . . . .39
Legal notices. . . . . . . . . . . . . . . . . . . . . .40
Six-month limited warranty . . . . . . . . . . . .41
Introduction
Congratulations on your purchase of a high-quality
Insignia product. Your new digital picture frame
represents the state of the art in digital picture frame
design and is designed for reliable and trouble-free
performance.
08-1607 NS-DPF7WM-09 - ENG.fm Page 1 Thursday, August 28, 2008 11:40 AM

2
NS-DPF7WM-09
www.insignia-products.com
Safety information
• Always follow these basic safety precautions
when using your digital picture frame. This will
reduce the risk of fire, electric shock, and injury.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to alert
the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the digital picture
frame.
Warning
• To reduce the risk of fire or shock hazard,
do not expose the frame to rain or moisture.
• To prevent the risk of electric shock, do not
remove the cover. There are no
user-serviceable parts inside. Refer all
servicing to qualified personnel.
• Do not place the unit in direct sunlight or
near any source of heat, otherwise the
surface of the digital picture frame may
warp, change color or be damaged.
08-1607 NS-DPF7WM-09 - ENG.fm Page 2 Thursday, August 28, 2008 11:40 AM

NS-DPF7WM-09
3
www.insignia-products.com
• This product is designed for indoor use only.
• Unplug the frame before performing
maintenance or when the frame is not in use.
• Do not block the ventilation holes on the back of
the frame at any time.
• Protect the power cord. Route power cords so
they are not likely to be walked on or pinched by
items placed on or against them. Pay particular
attention to the point where the cord attaches to
the frame.
• Only use the AC power adapter included with the
frame. Using any other power adapter will void
your warranty.
Additional care and maintenance
• Wipe the LCD gently with a soft, lint-free cloth or
an untreated lens-cleaning tissue. Do not use
cleaning solutions unless designed specifically
for LCD screens. Do not allow chemicals, such
as suntan lotion, to contact painted surfaces.
• Service agreements are available in some
countries.
08-1607 NS-DPF7WM-09 - ENG.fm Page 3 Thursday, August 28, 2008 11:40 AM

4
NS-DPF7WM-09
www.insignia-products.com
Features
• Displays digital pictures (JPG/JPEG format) and
digital slideshows without a computer.
• Plays music (MP3, WMA, or AAC formats) alone
or with a picture slideshow.
• Display pictures directly from a memory card or
USB drive (not included).
• Bright, clear digital 7" TFT-LCD screen
• Compatible with a wide variety of memory cards,
including SD, MMC, Memory Stick, Compact
Flash, and xD.
• Compatible with USB flash drives.
• Multi-image mode displays multiple pictures at
the same time in a slideshow.
• On-frame button controls and infrared remote
control.
• Clock and calendar
• 128 MB internal memory.
Package contents
• 7" Insignia digital picture frame
• AC power adapter
• Remote control with battery and holder
• User Guide
• Quick Start Guide
• Cleaning cloth
• Mini USB cable
• Three interchangeable faceplates
• MS Pro/Duo adapter
08-1607 NS-DPF7WM-09 - ENG.fm Page 4 Thursday, August 28, 2008 11:40 AM

NS-DPF7WM-09
5
www.insignia-products.com
Front
# Description
1 LCD screen
08-1607 NS-DPF7WM-09 - ENG.fm Page 5 Thursday, August 28, 2008 11:40 AM

6
NS-DPF7WM-09
www.insignia-products.com
Back and left side
# Description Function
1 Power switch Use to turn your picture frame on or
off.
2 Mounting holes Use with two screws to mount your
picture frame on a wall.
3 Adjustable stand Use to hold your picture frame upright
on a flat surface.
4 Mini USB port Connect the provided mini USB cable
into this port and your computer.
5 DC 5 V power
connector.
Plug the AC power adapter in here.
08-1607 NS-DPF7WM-09 - ENG.fm Page 6 Thursday, August 28, 2008 11:40 AM

NS-DPF7WM-09
7
www.insignia-products.com
Top and right side
You can use most of the frame’s features by using either
the buttons on top of the frame or by using the remote
control. Selecting files for copying, deleting, or viewing
requires the remote control, and the instructions in this
guide refer to remote control buttons (except where
noted).
5
6
7
8
9
10
08-1607 NS-DPF7WM-09 - ENG.fm Page 7 Thursday, August 28, 2008 11:40 AM

8
NS-DPF7WM-09
www.insignia-products.com
# Description
1 Memory card slot Supports Memory Stick, Memory Stick
Duo, Memory Stick PRO, Memory Stick
PRO Duo, Memory Stick Micro,
Multimedia Card (MMC), Secure Digital
(SD), and xD
2 Memory card slot Supports CF cards
3 USB device port Plug a USB memory device into this port.
4 Back button Press to go to the previous selection or
screen.
5 Down button Press to navigate down in the OSD
menus.
6 Up button Press to navigate up in the OSD menus.
7 Enter/Pause
button
Press to confirm a setting, to begin a
slideshow, or to pause a slideshow.
8 Right button Press to navigate right in the OSD menus.
9 Left button Press to navigate left in the OSD menus.
10 Menu button Press to open the OSD menus.
08-1607 NS-DPF7WM-09 - ENG.fm Page 8 Thursday, August 28, 2008 11:40 AM

NS-DPF7WM-09
9
www.insignia-products.com
Remote control
# Button Description
1SLIDE
SHOW
Press to start a slideshow or toggle the multi-image
Display mode.
2 MENU Press to display the
Setup menu.
3PICTURE&
MUSIC
Press to open the
Picture & Music screen or to play
pictures and music together.
4 VOL+ Press to move the selection up or to raise the
volume.
08-1607 NS-DPF7WM-09 - ENG.fm Page 9 Thursday, August 28, 2008 11:40 AM

10
NS-DPF7WM-09
www.insignia-products.com
5 PREV Press to move the menu selection up or left,
display the previous picture, or select the previous
file.
6 VOL- Press to move the menu selection down or to lower
the volume.
7 BACK Press to go back a screen.
8 SELECT Press to select a picture or file to copy or delete.
9 INFO Press to display picture information in Pause mode.
10 CLOCK/CAL Press to display the clock, calender, and pictures (if
available).
11 ZOOM Press to magnify the picture.
12 NEXT Press to move the menu section right, display the
next picture, or select the next file.
13 /ENTER Press to select the highlighted option or to pause
and resume the slideshow.
14 Press to enter Thumbnail mode or to display files
and folders.
15 ROTATE Press to rotate the picture.
16 DEL/
COPY
Press to delete selected pictures from internal
memory or to copy selected pictures from the
connected memory card to internal memory.
# Button Description
08-1607 NS-DPF7WM-09 - ENG.fm Page 10 Thursday, August 28, 2008 11:40 AM

NS-DPF7WM-09
11
www.insignia-products.com
Setting up your frame
Setting up the remote control
To set up the remote control:
1Remove the plastic tab that extends past the bottom
edge of the remote control. This tab protects the
battery. The remote control will not work until it is
removed.
2Point the remote control at your picture frame within
16 feet (5 m) and within a 60° angle.
Warnings
Improper use of the battery may cause
overheating, explosion, or ignition, which can
result in an injury or a fire.
Battery chemicals can cause a rash. If the
battery leaks, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.
Do not put the battery in fire or water.
08-1607 NS-DPF7WM-09 - ENG.fm Page 11 Thursday, August 28, 2008 11:40 AM

12
NS-DPF7WM-09
www.insignia-products.com
Turning on the frame
To turn on the frame:
1Extent the adjustable stand.
2Rotate the stand to position the frame vertically or
horizontally. Adjust the stand's length to obtain the
viewing angle you want.
3Plug the AC power adapter into the frame’s DC
power connector and into an AC power outlet.
4Slide the Power On/Off switch to the ON position to
turn on the frame. The INSIGNIA logo is displayed
for several seconds, then the frame automatically
starts a slideshow of the pictures stored in internal
memory (when no memory card is present). If a
memory card is present, the frame shows the
picture(s) stored on the memory card.
Mounting your frame on a wall
Use wall-anchoring hardware (not included) to anchor
your frame securely to your wooden wall.
To change to portrait, turn your frame 90° and use the
wall mounting holes at the top.
08-1607 NS-DPF7WM-09 - ENG.fm Page 12 Thursday, August 28, 2008 11:40 AM

NS-DPF7WM-09
13
www.insignia-products.com
Using your frame
You can use your digital picture frame to:
• Play a slideshow of pictures on a memory card
• Play a slideshow of pictures in internal memory
• Adjust a picture’s view
• Change display settings
• Copy pictures or files to internal memory
• Delete pictures or files from internal memory
• Play music alone or with pictures
• Display a clock and calendar with pictures
Playing slideshows
You can choose to begin a slideshow automatically, from
the first picture on the internal memory or the memory
card, or you can start a slideshow manually, from a
specific picture or file.
To automatically start a slideshow:
1Insert a memory card or USB device into one of the
available memory slots or the USB port. A slideshow
of pictures from the memory card or USB device
automatically starts to play.
2Press ENTER to pause the slideshow on a
particular picture. Press ENTER again to
resume the slideshow.
Caution
Memory cards fit into the card slots in only one
direction. Do not force a memory card into a
slot. The card should fit snugly when inserted
correctly. Some cards require an adapter to fit
correctly. For more information on supported
memory cards, see “Specifications” on
page 39.
08-1607 NS-DPF7WM-09 - ENG.fm Page 13 Thursday, August 28, 2008 11:40 AM

14
NS-DPF7WM-09
www.insignia-products.com
To manually start a slideshow:
1Insert a memory card or USB drive into one of the
available memory slots or the USB port. A slideshow
of pictures from the memory card or USB device
automatically starts to play.
2Press BACK repeatedly until the Home menu
opens.
3Press or to highlight the card (or internal
memory) that you want. Your selection turns green.
4Press ENTER. The Select Media menu opens.
5Press or to highlight the PICTURE icon. The
icon turns green.
6Press ENTER to enter the Thumbnail mode.
The thumbnail images appear on the screen.
Home
Home
08-1607 NS-DPF7WM-09 - ENG.fm Page 14 Thursday, August 28, 2008 11:40 AM

NS-DPF7WM-09
15
www.insignia-products.com
7Press or to highlight a picture, then press
SLIDESHOW on the remote control. The slideshow
starts from the picture you selected.
8Press ENTER to pause the slideshow, then
press ENTER again to resume the slideshow.
Copying pictures to internal memory
You can copy a single picture, multiple pictures, or all
pictures from an attached memory card to the frame’s
internal memory.
Notes
You cannot copy pictures from the internal
memory to an attached memory card, and you
cannot copy pictures between attached
memory cards.
Because you cannot copy pictures back from
the frame to a memory card, the frame should
not be treated as your primary picture storage
method. Make sure that you have the pictures
stored elsewhere (such as a memory card).
If you want to copy pictures from the internal
memory to an attached memory card, you can
use a USB cable to copy pictures between the
memory card, internal memory, and the
computer.
08-1607 NS-DPF7WM-09 - ENG.fm Page 15 Thursday, August 28, 2008 11:40 AM

16
NS-DPF7WM-09
www.insignia-products.com
To copy selected pictures to internal
memory:
1Press BACK until the
Home screen opens.
2Press or to highlight the memory card you want
to play from, then press ENTER to open the
Select Media menu.
Home
Home
08-1607 NS-DPF7WM-09 - ENG.fm Page 16 Thursday, August 28, 2008 11:40 AM

NS-DPF7WM-09
17
www.insignia-products.com
3Press or to highlight the PICTURE icon, then
press ENTER. The
Thumbnail screen opens
with the pictures displayed.
4Press to highlight each picture you want
to copy, then press (SELECT) to mark it. A check
mark appears in the upper-right corner of each
marked thumbnail. Mark as many pictures as you
want to copy.
5Press (DEL/COPY). The Copy screen opens.
6Press to highlight Copy Selected or Copy All,
then press ENTER.
7Press to highlight YES, then press ENTER
again. The selected pictures are transferred to
internal memory (128 MB).
Copy Selected
Copy All
NO
YES
08-1607 NS-DPF7WM-09 - ENG.fm Page 17 Thursday, August 28, 2008 11:40 AM

18
NS-DPF7WM-09
www.insignia-products.com
Connecting your digital picture frame to
your computer
Pictures can be transferred to your digital picture frame
using your personal computer. To connect to a computer
you need the supplied mini USB cable.
To connect your digital picture frame to
your computer:
1With your digital picture frame turned off, plug the
small end of the USB cable into the small connector
on the frame, then plug the large USB connector into
a USB port on your computer.
2Turn on your digital picture frame.
Note
Your digital picture frame may not work with all
versions of Microsoft Windows.
08-1607 NS-DPF7WM-09 - ENG.fm Page 18 Thursday, August 28, 2008 11:40 AM