Insignia NS-DPF0712G User manual

7" Digital Picture Frame
NS- DPF0712G
User Guide

2www.insigniaproducts.com
7" Digital Picture Frame
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Setting up your picture frame. . . . . . . . . . . . . . . . . . . . 10
Using your picture frame . . . . . . . . . . . . . . . . . . . . . . . . 13
Maintaining. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
6-month limited warranty. . . . . . . . . . . . . . . . . . . . . . . 32
Introduction
Congratulations on your purchase of a high-quality Insignia
product. Your new digital picture frame is designed for
reliable and trouble-free performance.

7" Digital Picture Frame
3
www.insigniaproducts.com
Safety information
Always follow these basic safety precautions when using
your digital picture frame. This will reduce the risk of fire,
electric shock, and injury.
Placement—To prevent fire or electric shock, do not
expose this digital picture frame to rain or moisture. To
prevent it from falling do not place it on an unstable cart,
stand, tripod, bracket, or table. Keep the unit away from
strong magnets, heat sources, direct sunlight, and excessive
dust.
Installation—Make sure that the digital picture frame is
used in accordance with the instructions and illustrations
provided in this manual.
Objects and liquids—Do not push objects of any kind
into the digital picture frame through openings. Do not spill
or spray liquid of any kind on or in the digital picture frame
(this may result in a fire or electric shock). Do not place
anything heavy on the unit. To ensure proper ventilation and
proper operation, never cover or block the slots and
openings with a cloth or other material.
Disassembly—Do not attempt to disassemble the frame.
There is a risk of electric shock. Contact qualified service
personnel if your digital picture frame is in need of repair.
Cleaning the digital picture frame—When cleaning,
make sure the frame is unplugged from the power source.
Use the supplied cleaning cloth, or a cloth slightly
dampened with water for cleaning the exterior of the frame
only.
Warnings
To reduce the risk of fire or shock hazard, do not expose
the frame to rain or moisture and unplug the frame during
lightning storms.
To prevent the risk of electric shock, do not remove the
cover. There are no user-serviceable parts inside. Refer all
servicing to qualified personnel.
There is a risk of explosion if the battery is incorrectly
replaced. Replace only with the same or equivalent type of
battery.

4
NS- DPF0712G
www.insigniaproducts.com
Features
• Displays digital pictures (JPEG format) and picture
slideshows without a computer
• Displays pictures directly from an inserted portable
memory device (not included)
• Bright, clear TFT LCD screen
• Compatible with a wide variety of memory cards,
including:
• Secure Digital™ (SD)
•SDHC™
• MultimediaCard (MMC™)
•MemoryStick®
• Memory Stick Pro Duo™ (requires an adapter -
not included)
•xD™
• microSD™ (requires an adapter - not included)
• Compatible with USB flash drives
• Mini-USB port to connect the digital picture frame
to your PC
• Multi-image mode displays multiple pictures at the
same time in a slideshow
• Auto Rotate–pictures are rotated based on your
photos’ embedded EXIF data
• On-frame button controls and infrared remote
control
• 128 MB internal memory
Note
EXIF (Exchangeable Image File) data
is information stored by a digital
camera as it records a photo. This
information includes what
orientation the camera is in when a
photo is captured.

7" Digital Picture Frame
5
www.insigniaproducts.com
Package contents
• Digital picture frame
• AC power adapter
•USBcable
•UserGuide
•QuickSetupGuide
• Remote control with battery (CR2025)
•Cleaningcloth
Back
#Description
1Adjustablestand
2PowerOn/Offswitch
Made in China
THIS CLASS (B) DIGITALAPPARATUS COMPLIES
WITH CANADIAN ICES-003.
CET APPAREILNUMÉRIQUE DE LA CLASSE (B) EST
CONFORME À LA NORME NMB-003 DU CANADA.
Model: NS-DPF0712G
Power: 5VDC, 1.0A (5W)
Tested to Comply with FCC Standards
FOR HOME OR OFFICE USE
Manufactured for Insignia Products
7601 Penn Avenue South
Richfield MN USA 55423
Portrait
Landscape

6
NS- DPF0712G
www.insigniaproducts.com
Sides
#Description
1 Memory card slot, supports:
• Secure Digital™ (SD)
•SDHC™
• MultimediaCard (MMC™)
•MemoryStick®
• Memory Stick Pro Duo™ (requires an adapter - not
included)
•xD™
• microSD™ (requires an adapter - not included)
2USB(typeA)port
3 Remote control slot
4MiniUSBport
5 DC 5 V power connector
REMOTE
DC5V IN

7" Digital Picture Frame
7
www.insigniaproducts.com
Top (buttons)
You can access most of the frame’s features by using either
the buttons on top of the frame or by using the remote
control. Selecting files for copying, deleting, or viewing
requires the remote control, and the instructions in this
guide refer to remote control buttons (except where noted).
#Button Description
1 MENU/ To open the menu, quickly press and release.
To enter Standy mode, press and hold for two
seconds.
2 (left) Press to move the menu selection left or to
display the previous picture.
3 (right) Press to move the menu selection right or to
display the next picture.
4 ENTER/ Press to select menu items. During a slideshow,
press to pause or resume.
5 (up) Press to navigate up.
6 (down) Press to navigate down.
7 BACK Go back to previous selection or screen.
/

8
NS- DPF0712G
www.insigniaproducts.com
Remote control
# Button Description
1XSLIDESHOW Press to start a slideshow.
2 MENU Press to display the menu.
3S(Up) Press to move the selection up.
4 ENTER Press to select the highlighted option
or to pause and resume the slideshow.
RM-NSDPF0712G

7" Digital Picture Frame
9
www.insigniaproducts.com
5W(Left) PREV Press to move the menu selection left,
display the previous picture, or select
the previous file.
6T(Down) Press to move the menu selection
down.
7 BACK Press to go back a screen.
8INFO Presstodisplayinformationaboutthe
picture.
9 ZOOM Press to magnify the picture.
10 X(Right) NEXT Press to move the menu selection
right, display the next picture, or select
the next file.
11 SELECT Press to select a picture or file to copy
or delete.
12
(thumbnail/folder)
Press to enter Thumbnail mode or to
display files and folders.
13 ROTATE Press to rotate the picture.
14 DEL/COPY When reviewing pictures from
internal memory, press to delete
selected pictures.
When reviewing pictures from an
external, portable memory device,
press to copy selected pictures.
Note: Pressing this button does not
delete photos on the portable
memory device.
# Button Description

10
NS- DPF0712G
www.insigniaproducts.com
Setting up your picture frame
Setting up the remote control
To set up the remote control:
• Remove the plastic tab that extends past the
bottom edge of the remote control. This tab
protects the battery. The remote control will not
work until it is removed.
RM-NSDPF0712G

7" Digital Picture Frame
11
www.insigniaproducts.com
Setting up the frame
To set up the frame:
1Pull out the stand to set the frame in landscape
orientation.
2Turn the stand counterclockwise 90° to set the frame in
portrait orientation.
3Plug the AC power adapter into the frame’s DC power
connector and into an AC power outlet.

12
NS- DPF0712G
www.insigniaproducts.com
4Extend the stand from the back of the frame, then place
the frame on a flat surface. Push or pull the stand to
adjust the viewing angle.
5Slide the power switch to the ON position. The frame
automatically turns on and starts playing a slideshow of
the pictures stored in internal memory. This slideshow is
called Demo mode.
To turn off Demo mode, point the remote control at the
front of the frame and press ENTER.
Tip
You can also disable and re-enable Demo mode
from the menu. For instructions, see “Setup
options” on page 25.

7" Digital Picture Frame
13
www.insigniaproducts.com
Using your picture frame
You can use your digital picture frame to:
• Play a slideshow of pictures
•Adjustapicture’sview
• Change display settings
Playing slideshows
To play an instant slideshow from a portable
memory device:
1Insert a portable memory device into one of the
available memory slots or the USB port.
A slideshow of pictures from the portable memory
device automatically starts to play.
2Press ENTER/ to pause the slideshow on a
particular picture. Press ENTER/ again to resume
the slideshow.
Caution
Memory cards fit into the card slots in only one
direction. Do not force a memory card into a slot.
The card should fit snugly when inserted
correctly. Some cards require an adapter to fit
correctly. For more information on supported
memory cards, see “Specifications” on
page 30.

14
NS- DPF0712G
www.insigniaproducts.com
To manually play a slideshow from an
inserted portable memory device or from
internal memory:
1If the pictures you want to use are on a portable
memory device, insert the device into one of the
available memory slots or the USB port. A slideshow of
pictures from the portable memory device
automatically starts to play.
2Press (BACK) repeatedly until the Home menu
opens.
3Press Wor Xto select a portable memory device or
internal memory.
4Press XSLIDESHOW. A slideshow begins that displays
the pictures contained in the portable memory device
or internal memory.
Note
The option to select a portable memory device is
disabled if there is no device of that type in the
corresponding slot or port.
Tip
Press XSLIDESHOW during a slideshow to
switch to multi-image slideshow mode. Press
XSLIDESHOW again to return to single-image
display mode.

7" Digital Picture Frame
15
www.insigniaproducts.com
Copying pictures to internal memory
You can copy a single picture, multiple pictures, or all
pictures from an inserted portable memory device to the
frame’s internal memory.
To copy selected pictures from an external
portable memory device:
1Press (BACK) repeatedly until the Home screen
opens.
Notes
Using the frame alone, you cannot copy pictures
from the internal memory to an inserted portable
memory device, and you cannot copy pictures
from one inserted portable memory device to
another.
Because you cannot copy pictures back from the
frame to a portable memory device using the
frame, the frame should not be considered your
primary picture storage method. Make sure that
you have the pictures stored elsewhere (such as a
memory card).

16
NS- DPF0712G
www.insigniaproducts.com
2Press Wor Xto highlight the portable memory device
you want to copy from, then press ENTER/ . The
Thumbnail screen opens.
3Press Wor Xto highlight each picture you want to copy,
then press SELECT to mark it. A check mark
appears in the upper-right corner of each marked
thumbnail. Mark as many pictures as you want to copy.
Tip
You can press (thumbnail/file list) to switch
between thumbnail mode and file list mode.
Thumbnail mode displays all files in the selected
portable memory device, and file list mode
displays files and folders.

7" Digital Picture Frame
17
www.insigniaproducts.com
4Press DEL/COPY, then press Sor Tto
select Copy Selected (to copy the pictures you select)
or Copy All (to copy all pictures).
5Press X, press Sor Tto select Yes, then press
ENTER/ . The pictures are copied.
To copy pictures from your PC to internal
memory or portable memory device:
1Make sure that your computer has been started before
you begin.
2Connect the mini plug of the supplied USB cable to the
mini USB port on the digital picture frame, then connect
the other end to an available USB port on your
computer.
3Navigate to “Computer” or “My Computer” (Windows
operating systems). The frame's internal memory and
any inserted portable memory devices appear as
“removable disks.” Each memory area appears as a
separate removable disk.
On a Mac computer, the frame’s internal memory or an
external, inserted portable memory device appears as a
USB drive.
4Use your computer's standard drag and drop or copy
and paste procedures to move pictures on your
computer to the frame's internal memory or a portable
memory device you inserted in the frame.
Note
The frame displays the message "PC connection
established. Remote is temporarily inoperative!”.

18
NS- DPF0712G
www.insigniaproducts.com
To copy pictures from your internal memory,
or external, inserted portable memory device
to your computer:
1Make sure that your computer has been started before
you begin.
2Connect the mini plug of the supplied USB cable to the
mini USB port on the digital picture frame, then connect
the other end to an available USB port on your
computer.
3Navigate to “Computer” or “My Computer” (Windows
operating systems). The frame's internal memory and
any inserted portable memory devices appear as
“removable disks.” Each memory area appears as a
separate removable disk.
On a Mac computer, the frame’s internal memory or an
external, inserted portable memory device appears as a
USB drive.
4Use your computer's standard drag and drop or copy
and paste procedures to move pictures from the frame's
internal memory or an inserted portable memory
device to your computer.
Note
The frame displays the message “PC connection
established. Remote is temporarily inoperative!”.

7" Digital Picture Frame
19
www.insigniaproducts.com
Deleting pictures from internal
memory
To delete pictures from internal memory:
1Press (BACK) until the Home screen opens.
2Press Wor Xto highlight Internal Memory, then press
ENTER/ . The Thumbnail screen opens.
Note
You cannot delete pictures from an inserted
portable memory device. The frame should not
be considered your primary picture storage
method. Make sure that you have the pictures
stored elsewhere (such as a memory card).

20
NS- DPF0712G
www.insigniaproducts.com
3Press W/X/S/Tto highlight each picture you want to
delete, then press SELECT to mark it. A check mark
appears in the upper-right corner of each marked
thumbnail. Mark as many pictures as you want to delete.
4Press DEL/COPY, then press Sor Tto
select Delete Selected (to delete only the pictures you
select) or Delete All (to delete all pictures in memory).
5Press Xto open the submenu, press Sor Tto select
Yes, then press ENTER/ . The pictures are deleted.
To delete pictures with your computer:
1Make sure that your computer is on before you begin.
2Connect the mini plug of the supplied USB cable to the
mini USB port on the digital picture frame, and connect
the other end to an available USB port on your
computer.
3Navigate to “Computer” or “My Computer” (Windows
operating systems). The frame's internal memory and
any inserted portable memory devices appear as
“removable disks.” Each memory area appears as a
separate removable disk.
On a Mac computer, the frame’s internal memory or an
external, inserted portable memory device appears as a
USB drive.
4Find and highlight the pictures you want to delete, then
use your computer's standard procedures to delete
pictures from the frame's internal memory or an
inserted portable memory device.