Insignia NS-F9T7-BL User manual

Flat size (W×H): 314.33 × 148.08 mm.
Final folded size: 104.77 × 148.08 mm.
PACKAGE CONTENTS
• 9" personal fan
• Quick Setup Guide
IMPORTANT SAFETY INSTRUCTIONS:
PLEASE READ AND SAVE THESE IMPORTANT INSTRUCTIONS
WHEN USING ELECTRICAL APPLIANCES, BASIC PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND
INJURY TO PERSONS, INCLUDING THE FOLLOWING:
• Read all instructions before using this product.
• Use this fan only as described in this Quick Setup Guide. Any other use not
recommended by the manufacturer may cause fire, electrical shock, or
injury to person, and may void the warranty.
• Always unplug the unit before assembling, disassembling, or cleaning.
• Always unplug unit when not in use, when moving from one location to
another, and before cleaning.
• To disconnect, grip the plug and pull it from the wall outlet. Never yank
the cord.
• The use of attachments not recommended or sold by the appliance
manufacturer may cause hazards.
• Avoid contact with moving parts.
• DO NOT operate this fan with a damaged cord or plug, after a malfunction,
or is dropped or damaged in any manner. Discard the fan or return the unit
to Best Buy, Inc. for examination, electrical or mechanical adjustment, or
repair.
• Do not operate this fan in the presence of explosive and/or flammable
fumes.
• Do not place the fan or any parts near an open flame, or cooking or other
heating appliance.
• Extreme caution is necessary when the fan is used by or near children or
invalids and whenever the fan is left operating and unattended.
• This product is intended for household use only and not for commercial
or industrial use. Do not use outdoors.
• Always use on a dry level surface.
• Do not operate if the fan housing is removed or damaged.
• A loose fit between the AC outlet and plug may cause overheating of the
plug. Have a qualified electrician replace the outlet.
• This product employs overload protection (fuse). A blown fuse indicates
an overload or short-circuit situation. If the fuse blows, unplug the
product from the outlet. Replace the fuse as per the user servicing
instructions (follow product marking for proper fuse rating) and check
the product. If the replacement fuse blows, a short-circuit may be present
and the product should be discarded or returned to an authorized
service facility for examination and/or repair.
• DO NOT run the cord under carpeting. Do not cover the cord with throw
rugs, runners or the like. Do not route the cord under furniture or
appliances. Arrange the cord away from traffic area and where it will not
be tripped over.
• DO NOT open to clean the blades.
• This fan is equipped with a polarized alternating current line plug (a plug
having one blade wider than the other). To reduce the risk of electric
shock, this plug fits into the polarized power outlet only one way. This is a
safety feature. If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact a qualified
electrician to replace the obsolete outlet. Do not attempt to defeat the
safety feature.
• NEVER connect the fan to any power sources other than a 120 volt
alternating current polarized outlet.
• Warning: To reduce the risk of electric shock, DO NOT use this fan with
any solid-state speed control and DO NOT insert a finger or any object
into grill.
Before using your new product, please read these instructions to prevent any damage.
QUICK SETUP GUIDE
9" Table Fan
NS-F9T7-BL / NS-F9T7-MT / NS-F9T7-GY /
NS-FT9GR8 / NS-FT9BK8 / NS-FT9PK8
NS-F9T7-BL_9T7-MT_9T7-GY_GR8_BK8_16-0840_QSG_V2_EN.ai 1 11/29/2016 11:06:31 AMNS-F9T7-BL_9T7-MT_9T7-GY_GR8_BK8_16-0840_QSG_V2_EN.ai 1 11/29/2016 11:06:31 AM

FUSE REPLACEMENT
If your fan stops working, you may need to replace the fuse (not included).
Warning: Risk of fire. Do not replace the
attachment plug. It contains a safety device (fuse)
that should not be removed. Discard the product
if the attachment plug is damaged.
1Grasp the plug and remove it from the outlet.
Do not unplug it by pulling on the cord.
2Open the fuse cover by using your finger and
thumb to slide the fuse access cover away from
the cord.
3Remove the fuse by carefully prying it out.
4Replace fuse only with a 5 Amp, 125 Volt fuse.
5Close the fuse access cover by sliding it
toward the cord.
SPECIFICATIONS
• Dimensions (D × W × H): 4.5 x 10 x 11.4 in. (11.5 x 25.5 x 29 cm)
• Volts: 120V, 60Hz
• Speeds: 2 speeds
OPERATING INSTRUCTIONS
1Carefully remove your fan from the box (save the carton for o-season
storage).
2Make sure that the switch is in the OFF position before plugging the fan
into the outlet.
3Place the fan on a firm, level surface.
4Plug the power cord into any standard 120VAC~60Hz outlet.
5Turn on the switch located on the back of the fan. Slide the switch to set
the speed you want.
CLEANING/MAINTENANCE
• Before cleaning, be sure to turn o and unplug the fan.
• Carefully wipe the fan with a soft, damp cloth. Be very cautious near the
motor.
• DO NOT immerse the fan in water and never allow water to drip into the
motor housing.
• Never use gasoline, benzene, or thinner to clean the fan. This will damage
the surface of the fan.
• After cleaning, be sure to completely dry the fan with a cloth or towel
before using it.
• Before putting the fan in storage, clean it thoroughly, cover it with a vinyl
bag, and store it in a cool and dry place. We recommend using the original
(or appropriately sized) box.
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA
For customer service, call 1-877-467-4289 (U.S. and Canada) or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2016 Best Buy. All rights reserved.
Made in China
V2 ENGLISH 16-0840
OPEN
CLOSE
NS-F9T7-BL_9T7-MT_9T7-GY_GR8_BK8_16-0840_QSG_V2_EN.ai 2 11/29/2016 11:06:31 AMNS-F9T7-BL_9T7-MT_9T7-GY_GR8_BK8_16-0840_QSG_V2_EN.ai 2 11/29/2016 11:06:31 AM