V1 ENGLISH 15-0781
The power LED turns on indicating the hub
is ready for play.
Note: The devices connected to your hub's USB
ports work when your console is turned on.
If your console’s Power Save Settings are set to
always provide power to the USB port, the device
connected to your hub’s USB 3.0 port also works
when the console is in standby mode. (See the
documentation that came with the console for
information about how to set the Power Save
Settings.)
• To remove your hub, unplug all USB devices
connected to your hub, then hold the left
and right side of your hub and pull it out of
the game console.
SPECIFICATIONS
LEGAL NOTICES
FCC Caution
Changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
FCC Statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician
for help.
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
ICES Statement
CAN ICES-3 (B)/NMB-3 (B)
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 877-467-4289 (U.S.
and Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies.
Distributed by Best Buy Purchasing, LLC
©2015 Best Buy. All rights reserved.
Made in China
Transmission rate
Operating
temperature
Humidity
Output current
Dimensions
USB 2.0, 480 Mb/s (max)
USB 3.0, 5 Gb/s (max)
32°F~131°F
(0°C~55°C)
0% RH ~ 80% RH
Up to 1.75A shared
among all ports in use
1.77 × 4.92× 1.57 in
(4.5 × 12.5 × 4 cm)
LED power indicator
