Insinger 30VP-2 User manual

STANDARD EQUIPMENT
Item #_____________
CSI - 11400
30VP-2 / 50VP-2
VEGETABLE PEELERS
DESIGN
Insinger's Vegetable Peelers are available in two sizes: the 30VP-2
has a capacity of 30 pounds in 45 seconds and the 50VP-2 can
peel 50 pounds in only one minute.
●
Stainless steel hopper, cabinet,
feet, peel trap, screen, disc,
and discharge door
● Unique wave pattern s/s disc
●
S/S sides, disc and discharge
door coated with Insinger’s
exclusive bonded silicone carbide
for fast, accurate peeling
Model 30VP-2
Model 50VP-2
6245 State Road
Philadelphia, PA 19135-2996
215-624-4800
215-624-6966 FAX
800-344-4802
www.insingermachine.com
OPTIONAL ACCESSORY EQUIPMENT
❏ 1 minute timer
❏ Integral disposer
❏ Drawer

Note: For all rough in connections see Installation and Layout Detail Drawing.
SPECIFICATIONS
CONSTRUCTION - The hopper, cabinet, feet, peel trap, screen, disc, discharge door and chute are all fabricated from type 304
#18-8 stainless steel. The drain and fill line are made of copper and the hopper cover is made of aluminum.
ABRASIVE DISC - This special Insinger abrasive disc has a unique wave pattern in the stainless steel and a permanently
bonded silicone carbide abrasive for long life. The light-weight stainless disc with its stainless hub attachment to alloy shaft
prevents corrosion and allows easy removal for thorough cleaning.
DISCHARGE - The stainless steel discharge door and hinge pin incorporates an easy lock-and-release lever. The stainless steel
chute is removable for easy cleaning.
DRIVE - Standard frame motor (30VP-2: 3/4 HP. 50VP-2: 1 HP), with "V" belt drive provides direct speed reduction between
motor and peeling disc. The "V" belt motor drive design has a shock absorber effect to prevent damage in event of a jam or
overload. All bearings are sealed and permanently lubricated.
HOPPER - Stainless steel hopper with silicone carbide abrasive permanently bonded to sides and discharge door. Insinger's
unique bonding technique provides quick positive peeling and long service from the abrasive.
FEET - Adjustable stainless steel feet designed to be bolted to almost any type of floor surface.
SWITCH -Toggle type or pushbutton station, located on the right side of the discharge chute as standard.
30VP-2 / 50VP-2
CSI - 11400
Shipping weight
30VP-2 242 lbs.
50VP-2 262 lbs.
Current draw
amps 30VP-2 50VP-2
115/1/60 ............... 13.8 ................. 16.0
208/1/60 ................. 7.6 ................... 8.8
208/3/60 ................. 3.5 ................... 4.8
230/1/60 ................. 6.9 ................... 8.0
230/3/60 ................. 3.2 ................... 4.2
3M 09/06 PRINTED IN USA
Information and specifications subject to change without notice