INSPIRE Q E424-15CO(3A) User manual

1
ASSEMBLY INSTRUCTION
E424-15CO(3A) CHROME FINISH X-BASE MIRROR DESK WITH DRAWER
A
Mirrored Top
B
Metal Frame
C
Left Panel
1pc
1pc
1pc
D
Right Panel
E
Stretcher
F
Knob
1pc
1pc
1pc
G
Bolt 1/4”x5/8”
H
Leveler
I
Allen Wrench
18pcs
4pcs
1pc
I
This page lists all the contents included in the box.
Please take the time to identify the hardware as
well as the individual components to this product.
As you unpack and prepare for assembly, place
the contents on a carpeted or padded area to
protect them from damage.
** Pre-attached to the
inside of drawer **

2
*** Do not tighten screws & bolts until the entire unit is completely assembled.
1
Attach metal frame (B) to mirrored top (A) using bolt (G) and allen wrench (I) as shown.
2
Attach left panel (C) and right panel (D) to mirrored top (A) using bolt (G) and allen wrench (I).
Attach leveler (H) to the left panel (C) and right panel (D) as shown.

3
◎The two plastic washers are for the purpose of protecting mirror surface. Please place one of the
washers inside of the drawer and place the other one between front of the drawer and drawer
knob.
Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry
or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all
connections are tight.
3
a
Using bolt (G) and allen wrench (I) again, attach stretcher (E) between left panel (C) and right
panel (D). Please tighten all bolts at this step.
4
Carefully turn the assembled unit upright.
Remove drawer knob w/ plastic washers (F) from inside of the drawer and reattach on drawer
front as shown. The mirrored desk assembly is now complete.
Remove drawer knob w/ washers (H) from inside of the drawer and reattach on drawer front as
shown. The desk assembly is now complete.