INSPIRE Q Southport Linen 22-inch Chrome Finish Metal... User manual

1
ASSEMBLY INSTRUCTION
E355C SMALL X BASE STOOL
Side Panel Metal Frame Stretcher
2pcs 1pc 1pc
Round Finial Cushion
2pcs 1pc
Screw 1/4"x3/4" Screw Wood Screw Allen Wrench
6pcs 2pcs 4pcs 1pc
*** Do not tighten screws & bolts until the entire unit is completely assembled.
1
2
3
4
5
C
A
B
This page lists all the contents included in the box.
Please take the time to identify the hardware as
well as the individual components to this product.
As you unpack and prepare for assembly, place
the contents on a carpeted or padded area to
protect them from damage.
D

2
Fix the assembled metal base on Cushion (5) by using Wood Screw (C) as shown below.
Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry or
damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all
connections are tight.
1
Attach the Stretcher (3) to the hole
between the middle of the Side
Panel (1) by using Screw (B), and
then attach Round Finial (4) as shown.
Attach Metal Frame (2) to Side
Panel (1) by using Screw (A) and
Allen Wrench (D).
2
3