INSPIRE Q E711A(3A) User manual

E711A(3A) ACCENT TABLE WITH SHELF
Table Top
This page lists all the contents included in the box.
Please take the time to identify the hardware as
well as the individual components to this product.
As you unpack and prepare for assembly, place
the contents on a carpeted or padded area to
protect them from damage.
1 pc
Legs
4 pcs 4 pcs
Flat Washer
∅1/4"x19x1.5mm
Lock Washer
∅1/4"
Allen Key
4mm
Shelf
1 pc
8 pcs 8 pcs 1 pc
Allen Bolt
∅1/4"x45mm
Screw
∅8x32mm
8 pcs
A B C D
E F G H

Attached three Legs(B) to the Table Top(A). Use Allen Bolt(E) Lock Washer(F) and Flat Washer(G) on
holes of Table Top(A). Turn the Allen Key(H) in Allen Bolt(E).
Attached Shelf(C) to the Leg(B). Use Screw(D), on holes of Shelf(C). Attached the rest Leg(B) to the Table
Top(A). Use Allen Bolt(E) Lock Washer(F) and Flat Washer(G) on holes of Table Top(A). Tighten the
Allen Bolt(E) on Leg(B).
A
A
1
2

Take out the drawer, and remove the handle at back side of drawer. Use bolt install the handle on front
side.
Cleaning & Care
Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry or damp soft cloth.
Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all connections are tight.
3