CONGRATULATIONS! - you've purchased a fine piece of furniture from Target.
We have designed our furniture with you, the Target guest in mind. Our clear, easy - to - follow,
step - by - step instructions will guide you through the project from start to finish.
Feel confident that this will be a fun and rewarding project. The final product will be a quality
piece of furniture that will go together smoothly and give years of enjoyment.
If you have any questions, just call 1-877-670-3854 (8.30 a.m - 5 p.m CST).
METROPOLITAN
CLUB CHAIR
A 5/16"x 2"
ITEM HARDWARE LIST
6
QTY
1
8
10
10
PARTS LIST
5
ITEM
3
1
2
4
2
QTY
ARM
STRETCHER
BACK CUSHION
SEAT PANEL
SEAT CUSHION
LEG
64
1
1
1
1
for each step of the assembly instruction
For ease of identification please organize all hardware
NOTE: Please verify all parts are complete before begin assembly
Hardware & Parts Identification Please place all parts on a clean cloth for assembly
STEP1:
NOTE: DO NOT OVER TIGHTEN THE SCREWS
with screw driver (NOT INCLUDED) until tight.
STEP 2C: Insert wood screws into designated holes and turn clockwise
INSIDE OF CHAIR.
NOTE: SCREWS HOLES IN LEGS MUST BE FACING TOWARD
STEP 2B: Turn legs clockwise until tight.
STEP 2A: Start assembly legs into left and right arm. Then install
leg leveler into bottom of each leg.
NOTE: LEAVE BOLTS LOOSE FOR EASY ASSEMBLY WITH FRONT STRETCHER.
3B: Then turn clockwise with allen wrench until 80% tight
and washer(B).
3A: Attach cushion back with left side facing arm with bolts (A) with sping washer(C)
NOTE:DO NOT OVER TIGHTEN BOLTS FOR EASY
ASSEMBLYWITH FRONT STRETCHER.
Repeat above steps for right side facing arm assembly
5C: Then tighten all stretcher and seat back bolts
5B: Carefully position stretcher over bolts as shown.
clockwise with allen wrench until 80% tightened.
5A: Insert bolt (F) with spring washer (C) and washer (B) then turn
LOCATE THE HOLES INDENTATIONS AND INSERT THE (6) SCREWS.
FOR APPEARANCE PURPOSES.
NOTE: (6) PRE-DRILLED HOLES HAVE BEEN COVERED BY BLACK CLOTH
into pre-drilled holes
6A: Secure the Seat Panel to the chair frame using the screw "D"
*ENJOY METROPOLITAN SOFAFROM TARGET.
Place seat cushion and adjust leg leveler accordingly for balancing.
*Brushing is recommended on a regular basis.
lightly in the direction of the nap.
*When the microfiber is completely dry, brush it
Pat the area dry after cleaning.
a circular motion with a sponge or soft brush.
*Remove stains using mild soap and lukewarm water. Rub gently in
CARE INSTRUCTION:
NOTE:Do not use power tools for assembly. Power tools increases the risk
of over tightening which leads to splitting or cracking the wood
4
B
C
D
E
F 5/16"x 1"
STEP2:
STEP3:
STEP4:
STEP5: STEP6: STEP7:
4
GLEG BOX
4
Assembly Instruction
