Furniture of America Claren CM-BK939QQ User manual

Align the upper end rail (#11) to
the HB support bars (#1), then
insert 2 bolts (#A) into each side
and secure using the Allen wrench.
#1
#1
#1
#1
Align the HB down connect bar (#12)
to the HB support bars (#1), then
insert 2 bolts (#F) into each side
and secure using the Allen wrench.

Align the slats according
to the image on the
left, and insert a bolt
(#B) into each pre-drilled
hole. Secure using the
Allen wrench (#H).
Insert 2 bolts (#C) into
the center holes along
the support bar (#10)
and secure using the
Allen wrench (#H).
4-1,4-2. Align each end of the support bar (#11) to the top and bottom beds, then
insert a bolt (#D) into each end and secure using the Allen wrench (#H).

Align the slat support legs (#13) to the
holes along the center of the bottom bed,
then insert the bolts (#C) from the top
and secure using the Allen wrench (#H).
Align the ladder, then
insert a bolt (#D) into
each end and secure
using the Allen wrench.
Make sure all parts are firmly secured.
ASSEMBLY IS COMPLETED