modway EEI-4447 User manual

EEI-4447/ EEI-4448 SOFA
Customer Service 609-256-9000︱www.modway.com
Page 1of 5
Thank you for purchasing the MODWAY SOFA
Before you start, here are some helpful advice:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2.Owing to the size and weight of the sofa, we recommend that it is assembled by two adults, on a carpeted or
padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or the instruction until you have checked all the components
and hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe
and environmentally friendly way.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten
the components from time to time, so please save the tools that have been provided.
6.Please keep all pieces out of reach of children.
Hardware:
Components:
Bolt M8x30mm x8
Flat Washer M8 x8
1. Sofa Seat x1 2. Left Arm x1 3. Right Arm x1 4. Leg x4
5. Sofa Back x1 6. Back Cushion x2 7. Side Cushion x2
B.
Allen Wrench x1
C.
A.
D.
Screw x4
E.
Screw driver x1
* Not include hardware bag

EEI-4447/ EEI-4448 SOFA
Customer Service 609-256-9000︱www.modway.com
Page 2of 5
STEP 1:
1. Please put Sofa Seat (1) upside down on a carpeted or padded surface.
2. Open the Zipper strip at the bottom of the Sofa Seat (1) and take out 4 pieces of Legs (4) and 2 piece of
Back Cushions (6), 2 pieces of Side Cushions (7) and hardware bag.
STEP 2:
1. Attach 2 pieces of Legs (4) to the Left Arm (2) by using 4 pieces of Bolts (A) and 4 pieces of
Flat Washers (B) as shown.
2. Use Allen Wrench (C) to tighten all Bolts (A) clockwise until secure.
3. Repeat the same Step to assemble 2 pieces of Legs (4) to the Right Arm (3).

EEI-4447/ EEI-4448 SOFA
Customer Service 609-256-9000︱www.modway.com
Page 3of 5
STEP 3:
Insert Sofa Seat (1) to Left Arm (2) and Right Arm (3) by using the pre-installed Clips on Sofa Seat (1),
Left Arm (2) and Right Arm (3) to lock each other as shown.
STEP 4:
1. Insert Sofa Back (5) to Left Arm (2) and Right Arm (3) by using the pre-installed Clips on Left Arm (2),
Right Arm (3) and Sofa Back (5) to lock each other as shown.
2. Press Sofa Back (5), make the bottom of Left Arm (2),Right Arm (3) and Sofa Back (5) at the same
level as shown with Figure 1 & 2.

EEI-4447/ EEI-4448 SOFA
Customer Service 609-256-9000︱www.modway.com
Page 4of 5
STEP 5
1. Put the assembled Sofa Seat (1),Left Arm (2),Right Arm (3) and Sofa Back (5) on the side as shown.
2. Press Sofa Back (5), make the back of Left Arm (2),Right Arm (3) and Sofa Back (5) at the same
Level as shown with Figure 1 & 2.
3. Use Screw Driver (E) to tighten 4 pieces of Screws (D) from the pre-drilled holes of the Legs (4) into the
Sofa Seat (1) clockwise as shown.
STEP 6
Noted: Please Skip STEP 6, if you assemble EEI-4447 now.
1. Please put Cover of Back Cushions (6) on a carpeted or padded area and fully open the zipper as shown.
2. Insert 1 piece of Foam into Cover of Back Cushion (6) until the Foam is fully embedded into the Cover and Zip
up the Cover as shown.
3. Repeat the same steps for the remaining 1 piece of Foam and Cover of Back Cushion (6).

EEI-4447/ EEI-4448 SOFA
Customer Service 609-256-9000︱www.modway.com
Page 5of 5
STEP 7
1. Return the assembled Sofa Seat (1),Left Arm (2), Right Arm (3) and Sofa Back (5) to its normal position.
2. Carefully put 2 pieces of Back Cushion (6) and 2 pieces of Side Cushion (7) to the assembled
Sofa Seat (1),Left Arm (2),Right Arm (3) and Sofa Back (5) as shown.
Assembly is complete. Your sofa is ready to enjoy now