fantastic furniture KYE DINING SET D4 WALNUT User manual

Version 1.0
KYE
DINING SET D4 WALNUT
fantasticfurniture.com.au

fantasticfurniture.com.au Page 2Page 2
Looks like you’ve found
your Fantastic!
Love it? Share it!
Fantastic buy! Share how it looks at home on Instagram for
your chance to win a $250 Fantastic Furniture Gift Card!
@fantasticfurniture
We’re thrilled you’ve chosen Fantastic Furniture
to help create a home you’ll love!
fantasticfurniture.com.au
80

Assembly checklist
Useful information
Read through the instructions carefully
before you begin.
Identify and lay out all of the components
before you begin assembly.
! Never use power tools unless specifically instructed. They can damage your components or
hardware if used incorrectly.
components please visit our website Help Centre for further assistance.
! Periodically check and re-tighten all fasteners. Check the product care label or website for
product care instructions.
! Never use any glue until you are certain that the parts belong together.
! Always use a soft surface (such as carpet or cardboard) when assembling your product to
avoid scratching or damaging the surface of the product.
! The most common mistakes made during assembly are using the wrong hardware or getting
components back to front.
Unless instructed, do not fully tighten screws
until the item is fully assembled.
Make sure you have all the required tools.
Never use power tools unless instructed.
! Please see page 2 for any safety requirements or weight restrictions.
Page 3
fantasticfurniture.com.au

What you need
to assemble the product
Other tools you need:
Crosshead screwdriver ;
Allen key
Hardware pack
Parts list
2x Tube Frame (P1);
2x Tube Frame (P2);
Table Top (P3)
Page 4
fantasticfurniture.com.au
Tube Frame
(P1)
Tube Frame
(P2)
Tube Frame
(P1)
Tube Frame
(P2)
Table Top
(P3)
8 x Short bolts
(H1)
8 x Screws
(H2)

Page 5
Step 1
Use the Short bolts （H1）to lock the Tube frame (P1) into the Tube frame (P2) with
Allen key，then tighten.
fantasticfurniture.com.au
(P1)
(P1)
(P2)
(P2)
(P2)
(P1)
(H1) x 8
(H1)
Allen key
8 x Short bolts
(H1)

Page 6
Step 2
fantasticfurniture.com.au
(P3)
(P3)
(H2)
(H2) x 8
Place the table top (P3) on a soft surface (such as carpet or cardboard)，
then put the assembled tube frame on the table top (P3).
Insert the Screws (H2) into the table top (P3) with Crosshead screwdriver,then tighten.

Page 7
Step 3
Job complete!
In the interest of our environment please dispose
of all packaging thoughtfully.
fantasticfurniture.com.au

What you need
to assemble the product
Other tools you need:
Crosshead screwdriver ;
Allen key
Hardware pack
Parts list
Backrest (P4);
Right leg (P5);
Left leg (P6);
Support (P7);
Cushion (P8)
Page 8
fantasticfurniture.com.au
8 x Long bolts
(H3)
4 x Screws
(H2)
Backrest
(P4)
Right leg
(P5)
Left leg
(P6)
Support
(P7)
Cushion
(P8)
1 CHAIR REQUIRE
TOTAL PACK
32 x Long bolts
(H3)
16 x Screws
(H2)

Page 9
Step 1
Use the Long bolts （H3）to lock the Right leg (P5) and Left leg (P6) into the
Backrest (P4) with Allen key. Don’t completely tighten Bolts until all are screwed in.
fantasticfurniture.com.au
(H3)
(H3)
(H3)
(P4)
(P5)
(P6)
(P4)
(P6)
Allen key
4 x Long bolts
(H3)

Page 10
Step 2
Use the Long botls （H3）to lock the Support (P7) into the Right leg (P5) and
the Left leg (P6) with Allen key. Don’t completely tighten Bolts until all are screwed in.
fantasticfurniture.com.au
(H3)
(H3)
(H3)
(P7)
(P7)
(P5)
(P6)
(P6)
Allen key
4 x Long bolts
(H3)

Page 11
Step 3
fantasticfurniture.com.au
(H2)
(H2) x 4
(P8)
(P8)
2
Place the cushion (P8) on a soft surface (such as carpet or cardboard), then put the
assembled tube frame on the cushion (P8). Align the frame to the seat cushion.
Insert the Screws (H2) into the cushion (P8) with Crosshead screwdriver, then tighten.
Tighten all bolts including (H3) for leg support.

Page 12
Step 4
Job complete!
In the interest of our environment please dispose
of all packaging thoughtfully.
fantasticfurniture.com.au
Place the chair on the flat and
hard flooring. Sit on the chair ,
make sure all legs are level , then
fully tighten all bolts on legs.
Please keep the Allen Key, all the bolts need to be re-tightened regularly during usage.