Intek DX-460S User manual

INSTRUCTION MANUAL
MANUALE DI ISTRUZIONI
UHF FM / 80CH / 4W
400-470 MHz
PROFESSIONAL 2-WAY RADIO
PC PROGRAMMABLE
DX-460S

Declaration of Conformity
With the present declaration, we certify that the following products :
INTEK DX-460S
comply with all the technical regulations applicable to the above mentioned products
in accordance with the EC Directives 2006/95/EC, 2004/108/EC, 99/5/EC.
Type of product : UHF PMR Transceiver
Details of applied standards : EN 300 086 -1/-2 1, EN 301 489-1-5
EN 60065
Manufacturer : INTEK S.R.L.
Via G. Marconi, 16
20090 Segrate, Italy
Tel. [phone] / Fax. [phone]
E-mail : [email protected]
Contact Reference : Armando Zanni
Tel. [phone] / Fax. [phone]
E-mail : [email protected]
Segrate, 08/10/2009 dr. Vittorio Zanetti
(General Manager)
DECLARATION OF CONFORMITY
EC Certificate of Conformity
(to EC Directive 2006/95, 2004/108, 99/5)
NOTICE !
It is recommended to carefully read this owner’s manual before using the product. This will also help the user to
prevent using the radio in violation of the regulations valid in the country where the product is used, as well as to
avoid any possible interferences with other services.
RoHS
2002/95/EC

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Unpacking and checking parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Supplied accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Preliminary Steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
Getting acquainted with the product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-10
Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Menu Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-12
Menu Shortcut Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Index - Notice
- 1 -
NOTICE !
This transceiver is programmable via PC, using the dedicated software and the PC interface
cable (optional items). Any programming or modification of the original default setting must be
made by a specialised technician or by an authorised service centre. Some functions of this
transceiver might be programmed in violation of the technical rules in force for the use of the
UHF FM band. It is the user’s responsibility to check that any modification to the programming
will be done in compliance with the current regulations. Any modification to the product,
alteration of the internal circuit, of the external structure of the radio or any programming in
violation of the current regulations will automatically void the product certification and your right
to use the product. INTEK S.R.L. declines any responsibility concerning any modification of the
product, made by the user or by a third party, after delivery of the product.
NOTICE !
This transceiver has been factory pre-programmed, in order for the user to test it right after
purchase. It is the user' s responsibility to re-program the radio, in accordance with the
specifications for the frequency channels assigned by the local authority.
English

Thank you !
Thank you for choosing INTEK for your two-way business radios applications This user friendly
transceiver will provide you with clear and reliable communications and will keep your professional
activities at peak efficiency. This transceiver incorporates the latest and most advanced technology, so
you will be pleased with its quality and its technical features.
Important notice !
The use of UHF FM transceivers is subject to the regulations applied in the country where the product
has to be used. As regulations are usually subject to possible modifications, please check the current
regulations in your country with your dealer or local supplier. INTEK does not take any responsibility for
illegal use and operation of this product not in accordance with the regulation of the country where the
product is used.
Safety notice
The user must know and understand the common risks related to the use of transceivers. Do not use
the transceiver in environments at risk of explosion (where there are gas, dusts, smokes, etc.). Do not
use the transceiver in service areas or fuel stations, on board aircrafts, etc.
Cautions
Please observe the following precautions, in order to avoid causing fire, personal injuries or damage to
the radio:
It is suggested that each transmitted message lasts a few minutes only, since very long
transmissions at the maximum transmitter RF output power may overheat the transmitter.
Do not alter or modify in any way your transceiver.
Do not expose the transceiver for a long time to direct sunlight and do not place it close to
heat sources.
Do not expose the transceiver to excessively dusty or damp places, do not place it on
unstable surfaces.
In case of anomalous smell or smoke that leaks out from the transceiver, turn it off immediately
and remove the battery pack. Please contact an authorised service center.
Please do not dispose off used battery with common garbage. Please use the dedicated
disposal containers.
- 2 -
General Information
English

Unpacking and Checking Parts - Supplied Accessories
- 3 -
Unpacking and checking parts
Carefully unpack the product. Please identify all the parts listed below, before wasting the packaging. If
any part is missing or if the packaging shows any damage, please contact your dealer immediately.
Supplied accessories
Rubber flexible antenna with SMA connector
7.2V 1200mAh Li-Ion Rechargeable Battery Pack
Electronic Quick Desk Charger
Belt Clip
Speaker-microphone Jack Cover
User Manual
English
Rubber flexible antenna
with SMA connector
Quick Desk Charger Li-Ion Battery Pack
Belt Clip
PS
CI
M
Speaker-microphone
Jack Cover
User Manual

Preliminary Steps
- 4 -
Battery charging
Connect the 230VAC adaptor charger to the desk type battery charger
and to a 230VAC outlet. The Red Led will flash to confirm that the charger
is powered.
Insert the empty battery or the transceiver with the battery pack in the
battery charger. Please make sure that the charging contacts of the radio
are connected with the charging contacts of the charger cradle. The Red
Led will light then the device is ready to begin the charging process. The
charging time depends on the battery condition and capacity). When the
charging process has finished, the Red Led lights off and the Green Led
will light. Remove the battery pack or the transceiver from the battery
charger and disconnect it from the AC outlet.
Warning !
The battery is supplied empty and it has to be fully recharged before use.
Some complete cycles of charge/discharge will be necessary in order for the battery to reach a
peak efficiency level.
Please do not charge the battery again when it has just been charged. Otherwise, you may
damage the battery or reduce its life.
The battery charger does not switch OFF automatically when charging is complete, therefore
please remove battery or radio from the charger cradle and disconnect it from the AC outlet.
Do not recharge battery for more than 8 hours, in order to avoid battery overheating.
To install the battery
Please align the two battery slots with the fit runner on the lower side of
the transceiver.
Press the battery downward untill the locker placed on the rear side of the
radio hooks and fastens the battery.
English

To remove the battery
To remove the battery, press the battery locker placed on the rear side of
the radio and slide the battery away from the radio.
Warning !
Please do not waste used batteries into the environment and do not trash them with the common
garbage. Please use the dedicated case for the collection of used up batteries at your supplier.
Do not attempt to open or remove the battery casing.
Do not short the battery terminals or throw the used batteries into fire.
Installing the antenna
Connect the antenna to the antenna connector located on the top panel of
the radio. Gently turn the antenna clockwise until locked.
Warning : Do not touch the antenna and do not move it close to a
microphone cable during transmission, as this might cause malfunction
and damage to the radio.
To install / to remove the belt clip
If necessary, attach the belt clip to the tranceiver, making it slide along the
fit runner placed on the rear side of the battery untill the lock will hook. To
remove the belt clip press the lock and slide the belt clip away from
the battery.
Preliminary Steps
- 5 -
English

- 6 -
Preliminary Steps
English
Install the external earset-microphone jack rubber cover.
If an external earset-microphone is not used, please install the earset-
microphone jack rubber cover.
Install the earset-microphone jack rubber cover, by matching the three
rubber tabs with the holes on the radio, as showed on the drawing.
If the earset-microphone jack rubber cover is removed, radio will not be
splash proof.
To install the external microphone (optional)
To install the external microphone, remove the protection cover of the
external microphone/speaker jack. This cover ensures the watertight
integrity of the transceiver (spray-guard) that will not be ensured after its
removing. Insert the connector of the external microphone into the
right jack.
In order to avoid mulfunction or damage to the transceiver, use only
original microphones. Using non original accessories will authomatically
void the warranty.
Warning !
If an external earset-microphone is used, radio will not be splash proof.

Getting Acquainted with the Product
- 7 -
English
GETTING ACQUAINTED WITH THE PRODUCT
1. Antenna
Rubber flexible antenna with SMA connector.
2. Rotary Switch
Channels and functions selector.
3. Power ON switch and volume control
Switch on the transceiver turning the knob clockwise or counterclockwise to switch it off.
To increase the volume, turn the knob clockwise or counterclockwise to decrease it.
4. LCD Display
Backlighted Dot Matrix LCD Display, provides clear reading and full information on every function
and status of the radio
5. Menu Key
It selects the menu functions.
6. EXIT Key
Exits any status to stand-by status quickly.
7. Keypad
Numeric Keypad.
8. C (Clean) Key
Function key to quickly clean up or exit several functions of the radio.
1
13
2
3
4
6
7
5
12
11
9
8
10
14
15
16
17
18

- 8 -
Getting Acquainted with the Product
9. FUN Key
Function key to quickly access several functions of the radio.
10. UP/DOWN Keys
Channels and menu operation selection keys.
11. Microphone
Built-in microphone.
12. Speaker
Built-in speaker.
13. RX/TX LED Indicator
The LED indicator will light in green colour when the radio is receiving a signal and in red colour
during transmission.
14. PTT key (Push-To-Talk)
To transmit, press and keep pressed the PTT key (14), then speak into the microphone with your
normal voice. To receive release the PTT key (14).
15. LAMP Key
Rubber key to switch ON and OFF the LCD and keypad backlight function.
16. MONITOR Key
Press this key to open the Squelch and release it to close the Squelch.
17. External earset-microphone jack rubber cover
This cover protects the external earset-microphone jack and makes the radio splash proof.
18. Desktop Charger Contacts
English

- 9 -
Getting Acquainted with the Product
English
75
5
25
H
T
S
U
A B D
Q
C E F G
O NPR
I
L
M
LCD DISPLAY
A. Signal Digital Bar Meter
Indicates the received signal strenght in the receive mode.
B. CT Indication
The CT indication is lighted when the CTCSS function is enabled.
C. T Indication
Non available on this model.
D. DCS Indication
The DCS indication is lighted when the DCS function is enabled.
E.
+ - Indication
Not available on this model.
F. - Indication
Not available on this model.
G. R Icon
The R icon is lighted when the Reverse function is enabled.
H. Battery Level Indicator
It shows the current battery level condition.
I. CTCSS / DCS Code Number
It shows the CTCSS and DTS Codes setting.
L. Stop Scanning Icon
The channels scanning indicator is lighed when the scanning stops.
M. MONITOR Icon
This icon is lighted when the Monitor key is pressed.
N. Keypad Lock Icon
The Lock icon is lighted when the keypad lock function has been enabled.

- 10 -
Getting Acquainted with the Product - Getting Started
English
O. VOX Indication
The VOX icon is lighted when the VOX function has been enabled.
P. Frequency Reading (25-5-75).
Not available on this model.
Q. RF Digital Meter
It indicates the transmitter RF output power.
R. Dot Matrix Indication
It provides full information on channel and all enabled functions.
S. H Icon
The H icon is lighted when the transmitter is in HIGH POWER mode.
T. S Icon
The S icon is lighted when the automatic channel scan function has been enable.
The S icon will flash if a signal is detected on a channel.
U. F Icon
Not available on this model.
GETTING STARTED
Power ON
Switch on the transceiver turning the Power/Volume knob (3) clockwise until you hear a click, the
transceiver now is in stand-by mode.
Volume adjustment
To adjust the volume, turn the volume knob (3) while using the MONITOR (16) key to listen to the
background noise of the channels.
Channel selection
Select the desired channel, using the UP/DOWN (10) keys or the channels selector (2).
Transmission
In order to transmit, press the PTT (14) key and speak with your normal voice, keeping the microphone
at about 4 cm from your mouth. The LED indicator (13) will light in red color. Release the PTT (14) key
at the end of transmission.
Receiving
Release the PTT (14) key and properly adjusting volume, you will be able to receive the incoming signals.
When receiving a signal, the LED indicator (13) will light in green colour.

Menu Operation
- 11 -
English
MENU OPERATION
In stand-by status, press FUN (9) key to enter the menu.
Press the UP/DOWN (10) keys to choose menu items.
1. Menu function sequence
SCAN ---> T->R (reverse frequency) ---> FREQ (not available) ---> KEYBO (choose keyboard lock
mode) ---> LED (indicator setup) ---> BEEP (warning sound switch setup) ---> POW (RF output power
HI/LOW) ---> SQL (voice level setup) ---> TOT (emission timing setup) ---> VOX (VOX sensitivity setup)
---> STEP (not available).
2. Key Function in the Menu Mode
FUNCTION Key (9) : enter the menu set-up status
C Key (8) : exits the upper menu or quit menu set-up status
UP/DOWN Keys (10) : choose items
MENU/CONFIRMATION Key (5) : confirm item choice or parameter
EXIT Key (6) : exits any status to stand-by status quickly.
SCAN : scanning
In the stand-by status, press the FUN (9) key to display scanning indicator, and when the LCD Display
shows SCAN ?, press the MENU/CONFIRMATION (5) key to start scanning. If signals exist in one
channel, the channel will be displayed. Then press the MENU/CONFIRMATION (5) key, the Two-Way
Radio will stop scanning and remain at the current channel or else, it will start scanning for the next
channel after 2 seconds.
T->R (reverse frequency)
When dual frequency is used to start reverse frequency function, the receiving frequency and emission
frequency will interchange. Press the FUN (9) key then press the UP/DOWN (10) keys. When the LCD
display shows T->R ?, press the MENU/CONFIRMATION (5) key to confirm.
FREQ : not available on this model
KEYBO : Keyboard lock setup
In the stand-by status, press the FUN (9) key and then the UP/DOWN (10) keys to find, and when the
display shows KEYBO?, press the MENU/CONFIRMATION (5) key to enter. You will see two options
available, AUTO and MANUAL.
AUTO: automatic locking
When this option is chosen, the keyboard will be locked automatically when no operation is performed.
MANUAL: manual locking
When this option is chosen, the keyboard cannot be locked automatically.
LED : light setup
In the stand-by status, press the FUN (9) key and then the UP/DOWN (10) keys, and when the display
shows LED ?, press the MENU/CONFIRMATION (5) key to enter. You will see three options available:
AUTO, MANUAL and ON. Press the MENU/CONFIRMATION (5) key to select the desired item.
AUTO: When this option is chosen, the display light will be turned on once you press the key.
MANUAL: When this option is chosen, the display light will not be turned on automatically.
You have to operate the side key manually to use light.

English
ON: When this option is chosen, the display light will be turned on all the time. The light will be on
without any operation.
BEEP : warning sound setup
In the stand-by status, press the FUN (9) key and then the UP/DOWN (10) keys, and when the display
shows BEEP ?, press the MENU (5) key to enter. Press the UP/DOWN (10) keys, and you can see ON
and OFF in turns. You can choose sound ON or OFF by pressing the MENU/CONFIRMATION (5) key.
POW : RF output power setup
In the stand-by status, press the FUN (9) key and then the UP/DOWN (10) keys, and when the display
shows POW ?, press the MENU (5) key to enter. Press the UP/DOWN (10) keys, and you can see H
and L in turns. You can choose high / low power by pressing the MENU/CONFIRMATION (5) key.
SQL : Squelch level setup
In the stand-by status, press the FUN (9) key and then UP/DOWN (10) keys, and when the display shows
SQL ?, press the MENU/CONFIRMATION (5) key to enter. Press the UP/DOWN (10) keys to choose the
desired squelch level and confirm the selection by pressing the MENU/CONFIRMATION (5) key.
TOT : Emission Timing Setup
In the stand-by status, press the FUN (9) key and then the UP/DOWN (10) keys, and when the display
shows TOT ?, press the MENU/CONFIRMATION (5) key to enter. Press the UP/DOWN (10) keys to set
up emitting time limit. The time unit is in seconds. Press the MENU/CONFIRMATION (5) key to confirm
the selection.
VOX : VOX Level Setup
In the stand-by status, press the FUN (9) key and then the UP/DOWN (10) keys, and when the display
shows VOX ?, press the MENU/CONFIRMATION (5) key to enter. Press the UP/DOWN (10) keys to set
up the desired VOX level and press the MENU/CONFIRMATION (5) key to confirm the selection.
STEP : not available on this model
MENU SHORTCUT KEYS
Press the FUN (9) key, then press the numeric key to enter appropriate items. This shortcut function is
same as the items of menu, but they more easy to operate the Two Way Radio.
FUN + 1 Enter the channel/frequency scanning.
FUN + 2 Switches ON/OFF the Reverse Frequency function and exits stand-by status
FUN + 3 Not available.
FUN + 4 The way of keyboard locking (auto/manual) set-up.
FUN + 5 LED light set-up.
FUN + 6 Warning sound setup.
FUN + 7 High/Low RF output power setup.
FUN + 8 Squelch level setup.
FUN + 9 Emission timing setup.
FUN + 0 Swithes on the VOX function and VOX level setup.
FUN + *Keyboard Lock/Unlock
FUN + # Check the receiving/emission frequency of the channels and the CTCSS status.
Menu Operation - Menu Shortcut Keys
- 12 -

Specifications - Optional Accessories
- 13 -
SPECIFICATIONS
General
Frequency 400 - 470 MHz
Channels 80
Channel spacing 12.5, 25 KHz
DC input voltage 7.2 VDC
Operating temperature -20/+55°
Dimensions mm 58 x 120 x 35
Weight 235 gr. (with battery and antenna)
Receiver
Sensitivity (12dB Sinad) 0.16 µV
Selectivity 65dB
Intermodulation 60dB
Audio output 500mW
Transmitter
RF output power 4W / 1W
Modulation F3E
Spurious & Harmonics in cmpliance with the R&TTE regulations
Maximum deviation ≤±2.5KHz
Frequency Stability ±2.5ppm
OPTIONAL ACCESSORIES
- KME-315 External Earset-Microphone with tie clip
- KME-614 External Earset-Microphone with adjustable ear hook
- KME-801 External Earset-Microphone for security and bodyguard
- KME-100A External Earset-Microphone with tie clip
- KME-200A External Earset-Microphone with flexible boom mic and tie clip
- KME-H115 External Speaker-Microphone (light duty)
- KST-301 External Speaker-Microphone (heavy duty)
- CDDX-460S Programming Kit (PC interface cable and software CD)
User Information
in accordance with art. 13 of the Legislative Decree of 25th July 2005, no. 15 ”Implementation of Directives 2002/95/EC, 2002/96/EC and
2003/108/EC, relative to reduction of the use of hazardous substances in electrical and electronic equipment, in addition to waste disposal”.
The crossed bin symbol shown on the equipment indicates that at the end of its working life the product must be collected
separately from other waste.
The user must therefore take the above equipment to the appropriate differentiated collection centres for electronic and
electro technical waste, or return it to the dealer when purchasing a new appliance of equivalent type, in a ratio of one to one.
Appropriate differentiated waste collection for subsequent recycling, treatment and environment-friendly disposal of the
discarded equipment helps to prevent possible negative environmental and health effects and encourages recycling of the
component materials of the equipment.
Illegal disposal of the product by the user will be punished by application of the administrative fines provided for by the legislative
decree no. 22/1997 (article 50 and following of the legislative decree no. 22/1997).
English

Indice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Importante . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Informazioni per l' utente . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Disimballaggio e verifica delle parti . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Accessori forniti . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Preparazione . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-19
Familiarizzare con il prodotto . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20-23
Operazioni di base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-24
Utilizzo del menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24-27
Comandi veloci da tastiera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Specifiche tecniche . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Accessori opzionali . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Garanzia limitata . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Avvertenze importanti . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Avviso agli utenti . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Indice - Introduzione
- 14 -
IMPORTANTE !
Questo ricetrasmettitore è programmabile tramite PC, utilizzando l’apposito software e cavetto
di interfaccia (opzionali). L’eventuale programmazione o modifica della programmazione
esistente deve essere eseguita da un tecnico specializzato o da un centro di assistenza
autorizzato. Alcune funzioni del ricetrasmettitore potrebbero essere programmate in violazione
delle norme tecniche in vigore per l’utilizzo della banda UHF FM. E’ responsabilità dell’utente
verificare che eventuali modifiche nella programmazione delle funzioni del ricetrasmettitore
siano conformi a quanto previsto dalle norme tecniche in vigore. Modifiche al prodotto,
manomissioni, alterazione delle regolazioni interne o delle strutture esterne della radio e
programmazioni in violazione delle norme di legge fanno decadere le certificazioni e
omologazioni del prodotto ed il diritto all’utilizzo dello stesso.
INTEK s.r.l. declina qualsiasi responsabilità relativamente a modifiche della programmazione
del ricetrasmettitore, eseguite dall’utente o da terzi, dopo la consegna del prodotto.
IMPORTANTE !
Questo ricetrasmettitore è stato pre-programmato in origine, al fine di consentire un test del
prodotto dopo l’acquisto. E' responsabilità dell' utente riprogrammare la radio, nel rispetto delle
norme tecniche in vigore per l’ utilizzo sulle frequenze assegnate dalla autorizzazione
ministeriale.
Italiano

Grazie
Vi ringraziamo per aver scelto INTEK per applicazioni civili. Siamo certi che questo ricetrasmettitore di
facile uso vi consentirà di comunicare in modo affidabile e di svolgere le vostre attività hobbistiche con la
massima efficienza. Questo ricetrasmettitore incorpora la più avanzata tecnologia e sarete soddisfatti del
suo livello di qualità e delle sue caratteristiche tecniche.
Avviso importante per l' utente !
L’utilizzo dei ricetrasmettitori UHF FM è regolato dalle norme di legge in vigore. Poiché le norme stesse
sono soggette a possibili variazioni, prima di utilizzare gli apparecchi, si raccomanda di informarsi
presso il proprio rivenditore o fornitore verificando gli eventuali adempimenti da osservare. INTEK
declina qualsiasi responsabilità relativamente ad un uso degli apparecchi non autorizzato o non
conforme alle norme di legge.
Sicurezza
L’utente deve conoscere e comprendere i rischi comuni legati all’uso di apparecchi ricetrasmittenti. Non
utilizzate mai il ricetrasmettitore in ambienti a rischio di esplosione (in presenza di gas, polveri, fumi,
etc.). Non utilizzare inoltre il ricetrasmettitore nelle aree di servizio o distributori di carburante.
Precauzioni
Si consiglia di osservare le seguenti precauzioni, al fine di evitare incendi, ferite personali e danni al
ricetrasmettitore:
Si suggerisce di trasmettere per alcuni minuti in quanto trasmissioni molto lunghe o alla massima
potenza del trasmettitore potrebbero surriscaldare lo stesso.
Non manomettere o modificare in alcun modo il ricetrasmettitore.
Non esporre il ricetrasmettitore per lungo tempo alla luce solare diretta e non porlo vicino a fonti
di calore.
Non porre il ricetrasmettitore in luoghi eccessivamente polverosi o umidi, inoltre non porlo su
superfici instabili.
Se sentite un odore anomalo o se vedete del fumo fuoriuscire dal ricetrasmettitore, spegnetelo
immediatamente e rimuovete il pacco batteria. Quindi contattate un centro di assistenza
autorizzato.
Non gettate batterie usate nella spazzatura. Utilizzate solo gli appositi contenitori per lo
smaltimento.
- 15 -
Informazioni per l' utente
Italiano

Disimballaggio e verifica delle parti - Accessori forniti
- 16 -
Antenna in gomma con
connettore SMA
Caricabatterie da tavolo Batteria Li-Ion
Clip da cintura
PS
CI
M
Chiusura per presa
earset-mic
Manuale d' uso
Disimballaggio e verifica delle parti
Disimballate accuratamente il ricetrasmettitore. Si raccomanda di identificare tutte le parti elencate nella
tabella seguente, prima di eliminare l’imballo. Se vi sono stati danni o mancanze durante la spedizione,
contattate immediatamente il vostro fornitore.
Accessori forniti
Antenna in gomma con connettore SMA
Pacco batteria Li-Ion 1200mAh 7.2V
Caricabatterie rapido elettronico da tavolo 230VAC
Clip da cintura
Chiusura per presa earset-mic
Manuale d' uso
Italiano

Ricarica della batteria
Collegare l’adattatore 230V alla presa posta sul retro del caricatore da
tavolo, come mostrato dal disegno. Collegare l' adattatore alla presa
230VAC. Il LED rosso inizierà a lampeggiare.
Inserire la batteria scarica o il ricetrasmettitore con la batteria installata nel
caricabatteria. Assicurarsi che i terminali della batteria siano a contatto
con quelli dei caricatore. Il LED rosso smetterà di lampeggiare e rimarrà
acceso, quindi l’apparecchio si predispone per iniziare la ricarica
automatica della batteria. Il tempo di ricarica dipende dallo stato di carica
e dalla capacità della batteria. Quando la ricarica è stata completata, il
LED di colore verde sarà acceso e il LED di colore rosso sarà spento. A
questo punto rimuovere la batteria o il ricetrasmettitore dal caricatore e
scollegare quest’ultimo dalla rete elettrica.
Avvertenze !
La batteria viene fornita scarica e deve essere quindi ricaricata prima dell’uso.
Sono necessari alcuni cicli completi di carica/scarica affinché la batteria raggiunga il massimo
livello di efficienza.
La batteria non deve essere ricaricata nuovamente se è già stata completamente caricata.
Diversamente, la vita della batteria può diminuire o la stessa essere danneggiata.
Il caricabatterie non si spegne automaticamente dopo la ricarica pertanto rimuovere la batteria o il
ricetrasmettitore dal caricatore e scollegare quest’ultimo dalla rete elettrica.
Non superare le 8 ore di ricarica, per evitare il danneggiamento della batteria.
Installare la batteria
Fare coincidere le 4 scanalature della batteria con le guide corrispondenti
sulla parte posteriore del ricetrasmettitore.
Fare scivolare la batteria sul retro del ricetrasmettitore fino a quando il
blocco posto alla base della radio si aggancia e blocca la batteria.
Preparazione
- 17 -
Italiano

Rimuovere la batteria
Per rimuovere la batteria premere sul blocco posto alla base della radio e
far scivolare via la batteria dalla radio.
Avvertenze !
Non disperdere batterie esaurite nell’ambiente e non gettarle tra i rifiuti ordinari. Utilizzate gli
appositi contenitori per la raccolta delle batterie usate o restituite le batterie da eliminare al vostro
fornitore.
Non tentare mai di rimuovere l’involucro della batteria.
Non cortocircuitare i teminali della batteria e non gettare quest' ultima nel fuoco.
Installare l' antenna
Collegare l' antenna in dotazione al connettore posto sul lato superiore
della radio, come mostrato nel disegno. Ruotarla delicatamente in senso
orario fino a stringerla.
Attenzione : non toccare l' antenna con le mani e non avvicinarla a cavi
microfonici durante la trasmissione in quanto ciò potrebbe causare danni
ricetrasmettitore.
Installare la clip da cintura
Se necessario, applicare la clip da cintura al ricetrasmettitore, facendola
scivolare nell’apposita scanalatura posta sul retro della batteria fino a
quando il blocco metallico si aggancia. Per rimuovere la clip premere sul
blocco metallico e farla scivolare via dalla batteria.
Preparazione
- 18 -
Italiano