Intellijel Mult 1U User manual

  
Mult 1U Manual
Mult 1U
Dual 5-Way Passive Multiple














Manual Revision: 2018.03.26 


 
Mult 1U Manual
 

Installation
This module is designed for use within an
Intellijel-standard 1U row, such as
contained within the Intellijel 4U and 7U
Eurorack cases. Intellijel’s 1U specification
is derived from the Eurorack mechanical
specification set by Doepfer that is
designed to support the use of lipped rails
within industry standard rack heights.
Because Mult1U is a passive module, it
requires no power to operate.

 

Page 1

 
Mult 1U Manual
 

Operation

Mult1U is a dual 5-way passive signal multiplier. A signal multiplier takes one input signal and
routes it to multiple outputs simultaneously. For example, you might want a keyboard’s gateCV
to trigger two different envelopes — one to control volume and the other to control filter
frequency. In addition, you might also want each key press to reset the phase of an LFO, which
controls some other parameter, such as Pulse Width modulation on your oscillator.

Since such a patch requires that one signal (a gate, in this case) be routed to three destinations,
you need some sort of signal multiplier to accomplish this.

Page 2

 
Mult 1U Manual
 

Mult 1U is divided into two sections — upper and lower. Each section is its own 5-way passive
multiplier, completely independent of the other.
Plug an audio or CV signal into any of the five top jacks [1], and Mult1U sends an unbuffered
version out the other four jacks in the group (thereby “multiplying” one signal into four). Similarly,
an audio or CV signal patched into any of the bottom five jacks [2] is routed to the other four
jacks in the bottom group.
Technical Specifications
WIDTH: 14 hp
MAXIMUM DEPTH: 27mm
CURRENT DRAW: None (passive module)

Page 3