Intellinet 505710 Series User manual

Industrial Slim Type
Fast Ethernet Rail Switch
505710 / 505628 Series User’s Manual
Version 1.0
May, 2008.

\
505710 / 505628 Series User’s Manual
INTELLINET NETWORK SOLUTIONS 1
Table of Content
Overview.........................................................................................................2
1.1 About the 505710 / 505628 unmanaged Industrial Switch...........................................2
1.2 Hardware Features.............................................................................................................2
Hardware Installation.....................................................................................3
2.1 Installing Switch on DIN-Rail.............................................................................................3
2.1.1 Mount 505710 / 505628 Series on DIN-Rail....................................................................3
2.2 Wall Mounting Installation..................................................................................................4
2.2.1 Mount 505710 / 505628 Series on the wall......................................................................4
Hardware Overview........................................................................................6
3.1 Front Panel..........................................................................................................................6
3.2 Front Panel LEDs ...............................................................................................................9
3.3 Bottom Panel.......................................................................................................................9
3.4 Rear Panel.........................................................................................................................10
Cables...........................................................................................................11
4.1 Ethernet Cables................................................................................................................11
4.1.1 100BASE-TX/10BASE-T Pin Assignments...................................................................11
Technical Specifications .............................................................................12

\
505710 / 505628 Series User’s Manual
INTELLINET NETWORK SOLUTIONS 2
Overview
1.1 About the 505710 / 505628 unmanaged
Industrial Switch
The 505710 / 505628 series are reliable unmanaged industrial switches which can work under
wide temperature, dusty environment and humid condition.
1.2 Hardware Features
• Rigid IP-30 protection case design
• 10/100 auto-sensing ports — automatically detect optimal network speeds
• Supports any combination of 10 Mbps or 100 Mbps network devices
• All RJ45 ports with Auto MDI-X and NWay auto-negotiation support
• Store-and-forward switching architecture
• Supports IEEE 802.3x flow control on full duplex and backpressure on half duplex
• Supports 2048 MAC address entries
• LEDs for power, link/activity, power fault indicator
• DIN rail or wall mounting
• Terminal block to provide dual power inputs with reverse-polarity protection

\
505710 / 505628 Series User’s Manual
INTELLINET NETWORK SOLUTIONS 3
Hardware Installation
2.1 Installing Switch on DIN-Rail
Each switch has a DIN-Rail kit on rear panel. The DIN-Rail kit helps switch to fix on the
DIN-Rail. It is easy to install the switch on the DIN-Rail:
2.1.1 Mount 505710 / 505628 Series on DIN-Rail
Step 1: Slant the switch and mount the metal spring to DIN-Rail.
Step 2: Push the switch toward the DIN-Rail until you heard a “click” sound.
Metal S
p
rin
g

\
505710 / 505628 Series User’s Manual
INTELLINET NETWORK SOLUTIONS 4
2.2 Wall Mounting Installation
Each switch has another installation method for users to fix the switch. Awall mount panel
can be found in the package. The following steps show how to mount the switch on the wall.
2.2.1 Mount 505710 / 505628 Series on the wall
Step 1: Remove DIN-Rail kit.
Step 2: Use 6 screws that can be found in the package to combine the wall mount panel. Just
like the picture shows below:

\
505710 / 505628 Series User’s Manual
INTELLINET NETWORK SOLUTIONS 5
The screws specification shows in the following two pictures. In order to prevent switches
from any damage, the screws should not larger than the size that used in 505710 / 505628
series switches.
Pozidrive
Step 3: Mount the combined switch on the wall.

\
505710 / 505628 Series User’s Manual
INTELLINET NETWORK SOLUTIONS 6
Hardware Overview
3.1 Front Panel
The following table describes the labels that stick on the IES-1080 / 1062 series.
Port Description
10/100 RJ-45 fast
Ethernet ports
10/100Base-T(X) RJ-45 fast Ethernet ports support
auto-negotiation.
Default Setting :
Speed: auto
Duplex: auto
Flow control : disable

\
505710 / 505628 Series User’s Manual
INTELLINET NETWORK SOLUTIONS 7
505710
1. LED for PWR1&PW2. When the PWR1 links, the green led will be light on.
2. LED for Fault Relay. When the power fault occurs, the amber LED will be light on.
3. 10/100Base-T(X) Ethernet ports.
4. LED for Ethernet ports status.
5. Model name

\
505710 / 505628 Series User’s Manual
INTELLINET NETWORK SOLUTIONS 8
505628
1. LED for PWR1&PW2. When the PWR1 links, the green led will be light on.
2. LED for Fault Relay. When the power fault occurs, the amber LED will be light on.
3. 10/100Base-T(X) Ethernet ports.
4. LED for Ethernet ports status.
5. Model name

\
505710 / 505628 Series User’s Manual
INTELLINET NETWORK SOLUTIONS 9
3.2 Front Panel LEDs
LED Color Status Description
PWR1 Green On DC power module 1 activated.
PWR2 Green On DC power module 2 activated.
Fault Amber On Fault relay. Power failure.
10/100Base-T(X) Fast Ethernet ports
On Port link up.
LNK / ACT Green Blinking Data transmitted.
3.3 Bottom Panel
The bottom panel components of IES-1080 / 1062 Series are shown as below:
1. Terminal block includes: PWR1, PWR2 (12-48V DC) and Relay output (1A@24VDC).
2. Power Fault Check
.
1 2

\
505710 / 505628 Series User’s Manual
INTELLINET NETWORK SOLUTIONS 10
3.4 Rear Panel
The components in the rare of IES-1080 / 1062 Series are shown as below:
1. Screw holes for wall mount kit.
2. DIN-Rail kit

\
505710 / 505628 Series User’s Manual
INTELLINET NETWORK SOLUTIONS 11
Cables
4.1 Ethernet Cables
The 505710 / 505628 series switches have standard Ethernet ports. According to the link
type, the switches use CAT 3, 4, 5,5e UTP cables to connect to any other network device (PCs,
servers, switches, routers, or hubs). Please refer to the following table for cable
specifications.
Cable Types and Specifications
Cable Type Max. Length Connector
10BASE-T Cat.3, 4, 5 100-ohm UTP 100 m (328 ft) RJ-45
100BASE-TX Cat.5 100-ohm UTP UTP 100 m (328 ft) RJ-45
4.1.1 100BASE-TX/10BASE-T Pin Assignments
With 100BASE-TX/10BASE-T cable, pins 1 and 2 are used for transmitting data, and
pins 3 and 6 are used for receiving data.
RJ-45 Pin Assignments
Pin Number Assignment
1 TD+
2 TD-
3 RD+
4 Not used
5 Not used
6 RD-
7 Not used
8 Not used
The 505710 / 505628 Series switches support auto MDI/MDI-X operation. You can
use a straight-through cable to connect PC to switch. The following table below shows
the 10BASE-T/ 100BASE-TX MDI and MDI-X port pin outs.
MDI/MDI-X pins assignment

\
505710 / 505628 Series User’s Manual
INTELLINET NETWORK SOLUTIONS 12
Pin Number MDI port MDI-X port
1 TD+(transmit) RD+(receive)
2 TD-(transmit) RD-(receive)
3 RD+(receive) TD+(transmit)
4 Not used Not used
5 Not used Not used
6 RD-(receive) TD-(transmit)
7 Not used Not used
8 Not used Not used
Note: “+” and “-” signs represent the polarity of the wires that make up each wire pair.
Technical Specifications
ORing Switch Model 505628 505710
Physical Ports
10/100 Base-T(X)
Ports in RJ45
Auto MDI/MDIX 8 5
Technology
Ethernet Standards IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX,
IEEE 802.3x for Flow control
MAC Table 1024 MAC addresses
Processing Store-and-Forward
LED indicators
Power indicator Green : Power LED x 2
Fault indicator Yellow : Indicate PWR1 or PWR2 failure
10/100TX RJ45 port
indicator Green for port Link/Act. Yellow for Duplex/Collision
Fault contact
Relay Relay output to carry capacity of 1A at 24VDC

\
505710 / 505628 Series User’s Manual
INTELLINET NETWORK SOLUTIONS 13
Power
Redundant Input
power Dual DC inputs. 12-48VDC on 6-pin terminal block.
Power consumption
(Typ.) 4 Watts 3.5 Watts
Overload current
protection Present
Reverse polarity
protection Present
Physical
Characteristic
Enclosure IP-30
Dimension (W x D x
H) 33(W) x 95(D) x 144.3(H) mm (1.30 x 3.74 x 5.68 inch.)
Weight (g) 391 382g
Environmental
Storage Temperature -40 to 85oC (-40 to 185oF)
Operating
Temperature -40 to 70oC (-40 to 158oF)
Operating Humidity 5% to 95% Non-condensing
Regulatory
approvals
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS),
EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950

\
505710 / 505628 Series User’s Manual
INTELLINET NETWORK SOLUTIONS 14
INTELLINET NETWORK SOLUTIONS™ offers a complete line
of active and passive networking products.
Ask your local computer dealer for more information or visit
www.intellinet-network.com
Copyright © INTELLINET NETWORK SOLUTIONS
All products mentioned are trademarks or registered trademarks of their respective owners.