Intellisystem IT-FHDCC06 Series User manual

IT-FHDCC06 Series
Information and Communication PTZ Camera
User Manual

1
Attentions
Electric Safety
Installation and operation must accord with electric safety standard
Caution to transport
Avoid stress, vibration and soakage in transport, storage and installation.
Polarity of power supply
The power supply of the product is ±12V; the max electrical current is 2A .Polarity of the power supply
drawing.
Careful of installation
Never move the camera by seizing the camera head. Don’t rotate camera head by hand; otherwise,
mechanical trouble will occur.
This series item must put on the smooth desk or platform, and it cannot be installed slant ways;
If the camera is installed on TV or computer, the base can be fixed by four double-sided adhesive trays.
Don’t apply in corrosive liquid, gas or solid environment to avoid the cover which is made up of organic
material.
To make sure no obstacle in rotation range.
Never power on before installation is completed.
Don’t disassemble discretionarily.
We are not responsible for any unauthorized modification or dismantling.
Attention
Electromagnetic filed under certain rate may affect camera image!

2
Content
1. Fast Installation........................................................................................................................................................ 3
1.1 Camera Interface Explanation ....................................................................................................................... 3
1.2 Power on Initial Configuration...................................................................................................................... 3
1.3 Video output................................................................................................................................................... 4
1.4 Audio in/out output........................................................................................................................................ 4
2. Product overview..................................................................................................................................................... 5
2.1 Product introduction ...................................................................................................................................... 5
2.2 Main Features ................................................................................................................................................ 6
2.3 Technical specification .................................................................................................................................. 7
2.4 Interface instruction....................................................................................................................................... 9
3. Application Instruction .......................................................................................................................................... 13
3.1 Video Output................................................................................................................................................ 13
3.2 Remote controller ........................................................................................................................................ 14
3.3 MENU SETTING........................................................................................................................................ 17
4. Network Connection.............................................................................................................................................. 24
4.1 Connecting Mode......................................................................................................................................... 24
4.2 Web client .................................................................................................................................................... 26
5. Serial Communication Control.............................................................................................................................. 32
5.1 VISCA protocol list ..................................................................................................................................... 32
5.2 PELCO-D protocol command list................................................................................................................ 38
5.3 PELCO-P protocol command list ................................................................................................................ 39
6. Camera Maintenance and Troubleshooting ........................................................................................................... 40
6.1 Camera Maintenance ................................................................................................................................... 40
6.2 Troubleshooting........................................................................................................................................... 40

3
1. Fast Installation
1.1 Camera Interface Explanation
Figure 1.1 Interface of IT-FHDCC06
1. Camera lens
2. Camera base
3. Built-in pick-up
4. Remote Controller Receiver light
5. Bottom DIP switch
6. Tripod screw hole
7. Installation Orientation Hole
8. Rotary Switch: Video format select
9. RS232 control interface (input )
10. RS232 control interface (output )
11. RS485 input (left +,right-)
12. A-out: Audio output interface
13. A-in: Audio input interface
14. SDI interface
15. HDMI interface
16. 10/100M Network interface
17. DC12V Input Power Supply Socket
1.2 Power on Initial Configuration
1) Power on: connect DC12V power supply adapter with NO.15 showed in Figure1.1or NO.11 in
Figure17.
2) Initial configuration: Power on with power indicator light on and remote control receiver light blinking,
camera head moves from bottom left to the bottom, and then go to the HOME position (intermediate
position of both horizontal and vertical ),while the camera module stretches. When remote control receiver
light stops blinking, the self-checking is finished
Note: If you set preset 0, when Power on initial configuration is completed, the camera automatically
moves to the preset 0 position.

4
1.3 Video output
This series has a variety of video output; ST models have video output from LAN, HDMI and 3G-SDI.
1) video output from LAN
a. Network cable connection port: refer to No.16 in figure 1.1.
b. Webpage Login: open your browser and enter 192.168.5.163 in the address bar (factory default);
press Enter to enter into the login page; click on the “player is not installed, please download and
install!" and follow the installation steps for installation. Then enter the user name admin and
password admin (factory default); press Enter to enter into the preview page, users can carry out PTZ
control, video recording, playback, configuration and other operations.
2) HDMI video output
a. DVI video cable connection: refer to No.15 in Figure1.1.
b. Connect the camera and the monitor via HDMI video cable; video output is available after camera
initial configuration.
3) SDI video output
a. 3G-SDI video cable connection: refer to No.15 in Figure1.1
b. Connect the camera and the monitor via SDI video cable; video output is available after camera initial
configuration.
1.4 Audio in/out output
Audio input
1）A-IN interface: Refer to NO.13 in figure 1.1, and it could be connected to 3.5 mm linear audio device.
2）Built-in pick-up: Refer to No.3 in figure1.1, and it could output audio without any other device
connected.
Audio output
1）A-OUT interface: Refer to No.12 in figure 1.1, and it could be connected to 3.5 mm linear audio device
2）HDMI: No.14in figure 1.1 and it output video and audio signal simultaneously.

5
2. Product overview
2.1 Product introduction
2.1.1 Product model
There are three main series according to different video output interface:
Refer to figure 2.1:
Model NO.X—XXX—XX
IR ---IR remote controller
WR---wireless remote controller
12---12x optical zoom lens
20---20x optical zoom lens
S---1080P60 downward compatibility
M---1080P30downward compatibility
Figure 2.1: models
2.1.2 Camera dimension
Figure 2.2 Camera dimension

6
2.1.3 Accessory
When you unpack, check that all the supplied accessories are included: refer to table 2.1:
Model NO.
Standard
Optional
Accessory
Power adapter 1piece
IR Remote controller 1 pcs
RS232 cable 1piece
wireless controller 1piece
User manual 1piece
Wall mounting bracket 1 set
Double-side glue shim 4pcs
Upside-down mounting
bracket 1 set
Warranty card 1piece
2.2 Main Features
2.2.1 Camera performance
This series camera offers perfect functions, superior performance and rich interfaces. The features
include advanced ISP processing algorithms to provide vivid images with a strong sense of depth, high
resolution and fantastic color rendition. It supports H.264/H.264+ encoding which makes motion video
fluent and clear even with less than ideal bandwidth conditions.
1.Superb high-definition image: It employs 1/2.8 inch high quality CMOS sensor. Resolution is up to
1920x1080 with frame rate up to 60 fps.
2.Various optical zoom lens: It has 12X/20X optical zoom lens for options. The 12x zoom lens is with
72.5 ° wide view angle without distortion.
3. Leading Auto focus technology: Leading auto focus algorithm makes lens a fast, accurate and
stable auto-focusing.
4. Low noise and High SNR: Low Noise CMOS effectively ensure high SNR of camera video.
Advanced 2D/3D noise reduction technology is also used to further reduce the noise, while ensuring
image sharpness.
5. Built-in pick-up: IT-FHDCC06 has advanced noise reduction performance.
6. Quiet PTZ: By adopting high accuracy step driving motor mechanism, it works extremely quiet and
moves smoothly and very quickly to designate position.
7. Multi-Format Video Outputs: support DVI (HDMI), 3G SDI, USB, wired LAN and wireless LAN
interfaces; the 3G-SDI is available for 100m transmission at 1080p60 format.
8. Multiple remote controls: There is IR remoter and 2.4G wireless remote for options. The 2.4G
wireless remote controller will not be affected by angle, distance or IR interference. Support transparent
transmission function.
9. Low-power sleep function: Support low-power sleep/wake up, the consumption is lower than 400mW
under sleep mode
10. Support Multiple Control Protocol: Support VISCA, PELCO-D, PELCO-P protocols which can also
be automatically recognized. Support VISCA control protocol through IP port.
11. RS-232 cascade function: ST series support RS-232 cascade function which is convenient for
installing.
12. 255 presets positions: Up to 255 presets (10 presets by remoter).

7
13. Wide application: tele-education, lecture
14. Capture, Webcasting, Videoconferencing, Tele-training, Tele-medicine, Interrogation and Emergency
command systems.
2.2.2 Network performance
1. Audio Input Interface: Support 16000,32000,44100,48000 sampling frequency and AAC, MP3,
PCM audio coding.
2. Multiple Audio/Video compression: Support H.264/H.265 video compression; AAC,MP3 and PCM
audio compression; Support compression of resolution up to 1920x1080 with frame up to 60 fps and
2 channel 1920x1080p with 30 fps compression.
3. Multiple network protocol: Support ONVIF,RTSP,RTMP protocols and RTMP push mode, easy to
link streaming media server (Wowza, FMS)
2.3 Technical specification
Model
12X
20X
Camera Parameter
Optical Zoom
12X,f＝3.9～46.1mm
20X,f＝4.7～94mm
Sensor
1/2.8 inch high quality HD CMOS sensor
Effective Pixels
Video Format
16: 9 2.07 megapixel
1080P60/50/30/25/59.94/29.97;1080I60/50/59.94;720P60/50/30/25/59.94/29.97
View Angle
6.3°(tele)--72.5°(wide)
3.3°(tele)--54.7°(wide)
Digital Zoom
10X
Minimum Illumination
0.5Lux (F1.8,AGC ON)
DNR
2D & 3D DNR
White Balance
Auto / Manual/ One Push/ 3000K/ 4000K/5000K/6500K
Focus
Auto/Manual
Aperture
Auto/Manual
Electronic Shutter
Auto/Manual
BLC
ON/OFF
WDR
OFF/ Dynamic level adjustment
Video Adjustment
Brightness, Color, Saturation, Contrast, Sharpness, B/W mode, Gamma curve
SNR
>55dB

8
Input / Output Interface
Video Interfaces
HDMI,3G-SDI,LAN,RS232（Ring through RS232
port）,RS485,A-IN,A-OUT,Biult-in pick-up
Image Code Stream
Dual stream output
Video Compression
Format
H.264,H.265
Control Protocol
VISCA/PELCO-D/PELCO-P; Baud Rate: 115200/9600/4800/2400bps
Audio Input Interface
Double track 3.5mm linear input;
Audio Compression
Format
AAC/MP3 Audio compression
HD IP Interface
100M IP port(100BASE-TX); 5G Wi-Fi (optional),Support Visca protocol control
through IP port.
Network Protocol
RTSP/RTMP,ONVIF,GBT28181
Power Interface
HEC3800 outlet (DC12V)
PTZ Parameter
Pan Rotation
±170°
Tilt Rotation
-30°～+90°
Pan Control Speed
0.1 -100°/sec
Tilt Control Speed
0.1-45°/sec
Preset Speed
Pan: 100°/sec, tilt: 40°/sec
Preset Number
255 presets (10 presets by remote controller)
Other Parameter
Supply Adapter
AC110V-AC220V to DC12V/1.5A
Input Voltage
DC12V±10%
Input Current
1A(Max)
Consumption
12W (Max)
Store Temperature
-10℃～+60℃
Store Humidity
20% - 95%
Working Temperature
-10℃～+50℃
Dimension
258mm x 172mm x 168mm
Weight
1.54KG
Remote Operation (IP)
Remote Upgrade, Reboot and Reset
Accessory
power supply,RS232 control cable, remoter, manual, warranty card

9
2.4 Interface instruction
2.4.1 External Interface
1) External interface: Rotary switch, RS232 input output, RS485 input, audio input, 3G-SDI output,
VI（HDMI）output, LAN, DC12V power interface.
Figure 2.3 external interface diagram
2.4.2 Bottom DIP Switch
Bottom DIP Switch diagram shown in Figure 2.5: