Intellisystem IT-ES5024-IM Series User manual

1
IT-ES5024-IM Series
Managed Industrial Ethernet Switch
User Manual

2
【Summarize】
IT-ES5024-IM series is an industrial grade and managed industrial
Ethernet switch. The IT-ES5024-IM-P (100/240VAC) industrial
Ethernet switches consists of 24 Ethernet ports. The
IT-ES5024-IM-2F-P (100/240VAC) industrial Ethernet switches
consists of 22 Ethernet ports and 2 Fiber ports. The
IT-ES5024-IM-4F-P (100/240VAC) industrial Ethernet switches
consists of 20 Ethernet ports and 4 Fiber ports. The
IT-ES5024-IM-8F-P (100/240VAC) industrial Ethernet switches
consists of 16 Ethernet ports and 8 Fiber ports. The
IT-ES5024-IM-12F-P (100/240VAC) industrial Ethernet switches
consists of 12 Ethernet ports and 12 Fiber ports. The
IT-ES5024-IM-16F-P (100/240VAC) industrial Ethernet switches
consists of 8 Ethernet ports and 16 Fiber ports. The
IT-ES5024-IM-20F-P (100/240VAC) industrial Ethernet switches
consists of 4 Ethernet ports and 20 Fiber ports. The
IT-ES5024-IM-24F-P (100/240VAC) industrial Ethernet switches
consists of 24 Fiber ports that provide an economical solution for
your industrial Ethernet connection.
The IT-ES5024-IM series switches have an operating
temperature range of -40 to 75°C, and are designed with low
consumption and without fan. The rugged hardware design makes
the IT-ES5024-IM perfect for ensuring that your Ethernet
equipment can withstand the rigors of industrial applications.
【Packing list】
Please check the packaging and accessories by your first
using.
Industrial Ethernet switch ⅹ1
User Manual ⅹ1
CD ⅹ1

3
Certificate of quality ⅹ1
Warranty card ⅹ1
Please inform us or our distributor if your equipments have
been damaged or lost any accessories, we will try our best to
satisfy you.
【Features】
High performance network exchange technology
Support IEEE802.3, IEEE802.3u, IEEE 802.3x IEEE802.1Q,
IEEE802.1p, IEEE802.1D, IEEE802.1W
Support 8K MAC address
Support 12.8Gbps backboard bandwidth
Support flow statistics
10/100BaseT(X)(RJ45)
Store and Forward switching process type
Plug-and-play , auto MDI/MDI-X connection
Support auto negotiation speed, F/H duplex mode, and auto
send data control
SW-Ring ring network patent technology (Fault recovery
time<20ms）
Support WEB configuration
Support MAC address learning, aging automatic
Support port status display, data update.
Support RSTP, IGMP, port trunking and port mirroring
Support rate control, Broadcast storm control
Support 1 channel relay alarm output
Reliable Industrial grade design
Industrial grade 4 design, -40-75℃work temperature
No fan deign
IP30 protection grade
19 inch rack mounting

4
【Panel layout】
IT-ES5024-IM-P (100/240VAC)
Front panel
Rear panel
1. Restore factory settings
2. Console port
3. Link/ACT LEDs
4. Systems running LED
5. The power LED
6. Relay alarm LED
7. Hangers
8. Power input and Relay output terminal block
9. 10/100BaseT(X) (RJ45) ports
10. Rear panel connector LEDs
IT-ES5024-IM-2F-P (100/240VAC)
Front panel
Rear panel
1. Restore factory settings

5
2. Console port
3. Link/ACT LEDs
4. Systems running LED
5. The power LED
6. Relay alarm LED
7. Hangers
8. Power input and Relay output terminal block
9. 10/100BaseT(X) (RJ45) ports
10. 100Base-FX ports
11. Rear panel connector LEDs
IT-ES5024-IM-4F-P (100/240VAC)
Front panel
Rear panel
1. Restore factory settings
2. Console port
3. Link/ACT LEDs
4. Systems running LED
5. The power LED
6. Relay alarm LED
7. Hangers
8. Power input and Relay output terminal block
9. 10/100BaseT(X) (RJ45) ports
10. 100Base-FX ports
11. Rear panel connector LEDs

6
IT-ES5024-IM-8F-P (100/240VAC)
Front panel
Rear panel
1. Restore factory settings
2. Console port
3. Link/ACT LEDs
4. Systems running LED
5. The power LED
6. Relay alarm LED
7. Hangers
8. Power input and Relay output terminal block
9. 10/100BaseT(X) (RJ45) ports
10. 100Base-FX ports
11. Rear panel connector LEDs
IT-ES5024-IM-12F-P (100/240VAC)
Front panel
Rear panel
1. Restore factory settings
2. Console port
3. Link/ACT LEDs

7
4. Systems running LED
5. The power LED
6. Relay alarm LED
7. Hangers
8. Power input and Relay output terminal block
9. 10/100BaseT(X) (RJ45) ports
10. 100Base-FX ports
11. Rear panel connector LEDs
IT-ES5024-IM-16F-P (100/240VAC)
Front panel
Rear panel
1. Restore factory settings
2. Console port
3. Link/ACT LEDs
4. Systems running LED
5. The power LED
6. Relay alarm LED
7. Hangers
8. Power input and Relay output terminal block
9. 10/100BaseT(X) (RJ45) ports
10. 100Base-FX ports
11. Rear panel connector LEDs

8
IT-ES5024-IM-20F-P (100/240VAC)
Front panel
Rear panel
1. Restore factory settings
2. Console port
3. Link/ACT LEDs
4. Systems running LED
5. Relay alarm LED
6. The power LED
7. Power input and Relay output terminal block
8. 10/100BaseT(X) (RJ45) ports
9. 100Base-FX ports
10.Rear panel connector LEDs
IT-ES5024-IM-24F-P (100/240VAC)
Front panel
Rear panel

9
1. Restore factory settings
2. Console port
3. Link/ACT LEDs
4. Systems running LED
5. Relay alarm LED
6. The power LED
7. Power input and Relay output terminal block
8. 100Base-FX ports
9. Rear panel connector LEDs
【Powersupply input】
The series rear panel provides 3 bit wiring terminal for
AC100~240V power entered. Terminal diagram is as follows:
Important notice:
1. Power ON operation: first of all, insert power cable’s terminal
block into device’s power port, then insert power supply plug into
power source
2. Power OFF operation: First off all, unpin power plug, then
strike the terminal block, please take care of operation sequence.
【Console port】
This series product provided 1pcs procedure test port based in
serial port. It adopts RJ45 interface, located in top panel, can
configure the CLI command through RJ45 to DB9 female cable.

10
【Appearance and dimensions】
This series of dimensions length width height, between
product series port number is different.
Unit（mm）
【Relay connection】
Relay access terminals in the rear panel of the device, next to
the power input parts, R+ and R- are in the middle of the relay

11
alarm output section. It is used to detect both power failure and
port failure. The open circuit state in normal non alarm state,
when there is any alarm information to the closed state. This series
of single power supply device is 1 relay alarm output, external
alarm lights or alarm buzzer or external switch signal acquisition
device in order to timely notify operators when an alarm occurs.
(Single power supply power failure alarm is not supported)
【Communication connector】
10/100BaseT(X) Ethernet port
The pinout of RJ45 port display as below, connect by UTP or
STP. The connect distance is no more than 100m. 100Mbps is
used 120Ω of UTP 5; 10Mbps is used 120Ω of UTP 3, 4, 5.
RJ 45 port support automatic MDI/MDI-X operation. Can
connect the PC, Server, Converter and HUB .Pin 1,2,3,6
Corresponding connections in MDI. 1→3, 2→6, 3→1, 6→2 are
used as cross wiring in the MDI-X port of Converter and HUB.
10Base-T/100Base-TX are used in MDI/MDI-X, the define of Pin
in the table as below.
NO.
MDI signal
MDI-X signal
1
TX+
RX+
2
TX-
RX-
3
RX+
TX+
6
RX-
TX-
4, 5, 7, 8
—
—
Note：“TX±”Transmit Data±，“RX±”Receive Data±，“—”Not Use.
1 8

12
MDI (straight-through cable)
MDI-X (Cross-over cable)
MDI/MDI-X auto connection makes switch easy to use for
customers without considering the type of network cable.
100Base-FX Fiber port
100Base-FX full-duplex SM or MM port, SC/ST/FC
type .The fiber port must be used in pair, TX (transmit) port
connect remote switch’s RX (receive) port; RX (receive) port
connect remote switch’s TX (transmit) port.
The optical fiber connection supports the line to instruct
enhance the reliability of network effectively.
Suppose: if you make your own cable, we suggest labeling the
two sides of the same line with the same letter (A-to-A and B-to-B,
shown as below, or A1-to-A2 and B1-to-B2).

13
【LED Indicators】
LED indicator light on the front panel of product, the
function of each LED is described in the table as below.
System Indication LED
LED
State
Description
PWR
ON
Power is being supplied to
power input PWR input
OFF
Power is not being supplied
to power input PWR input
RUN
ON/OFF
System is not running well
Blinking
System is running well
Link/ACT
(1~24)
ON
Port connection is active
Blinking
Data transmitted
OFF
Port connection is not active
ALARM
ON
Has alarm information
OFF
No alarm information
【Installation】
Before installation, confirm that the work environment meet the
installation require, including the power needs and abundant space.

14
Whether it is close to the connection equipment and other
equipment are prepared or not.
1. Avoid in the sunshine, keep away from the heat fountainhead or
the area where in intense EMI.
2. Examine the cables and plugs that installation requirements.
3. Examine whether the cables be seemly or not (less than 100m)
according to reasonable scheme.
4. Power: 100-240VAC power input
5. Environment：working temperature: -40～75℃
Storage Temperature: -40～85℃
Relative humidity 5%～95%
Rack mount installation
In most of industrial application, it is convenience to use rack
mount installation, the step of installation is as follows:
1. Check if have rack mount installation tools and components
(The package provided parts of components)
2. Check installation place strong or not, have the place to install
the device or not.
3. Put the device into rack, aim at the screw hole of device and
rack, fixed it in strong screw. Easy and convenience to
operation.
Wiring Requirements
Cable laying need to meet the following requirements,
1. It is needed to check whether the type, quantity and
specification of cable match the requirement before cable
laying;
2. It is needed to check the cable is damaged or not, factory
records and quality assurance booklet before cable laying;
3. The required cable specification, quantity, direction and laying
position need to match construction requirements, and cable

15
length depends on actual position;
4. All the cable cannot have break-down and terminal in the
middle;
5. Cables should be straight in the hallways and turning;
6. Cable should be straight in the groove, and cannot beyond the
groove in case of holding back the inlet and outlet holes.
Cables should be banded and fixed when they are out of the
groove;
7. User cable should be separated from the power lines. Cables,
power lines and grounding lines cannot be overlapped and
mixed when they are in the same groove road. When cable is
too long, it cannot hold down other cable, but structure in the
middle of alignment rack;
8. Pigtail cannot be tied and swerved as less as possible.
Swerving radius cannot be too small (small swerving causes
terrible loss of link). Its banding should be moderate, not too
tight, and should be separated from other cables;
9. It should have corresponding simple signal at both sides of the
cable for maintaining.
【Specifications】
Technology:
Standard: Support IEEE802.3, IEEE802.3u, IEEE 802.3x,
IEEE802.1Q, IEEE802.1p, IEEE802.1D, IEEE802.1W
Protocol: ARP、ICMP、TCP、UDP、DHCP、DNS、HTTP、
Telnet,、SW-Ring、RSTP、SNMP
Flow control: IEEE802.3x flow control, back press flow control

16
Functions:
Switch function: SW-Ring, QOS, 802.1QVLAN, RSTP, SNMP,
Port trunking, static multicast filter, port mirroring,
bandwidth management, broadcast storm control, port
flow statistics, upgrade online, up and download
configuration file, user name access system
SW-Ring: Support Single, Couple, Chain, Dual homing
Exchange attributes:
100M forward speed: 148810pps
100M maximum filter speed: 148810pps
Transmit mode: store and forward
System exchange bandwidth: 12.8G
MAC address table: 8K
Memory: 4M
Interfaces:
Electric port: 10Base-T/100Base-TX auto speed control, Half/full
duplex and MDI/MDI-X auto detect
100M optic fiber port: 100Base-FX, SC/ST/FC connector, support
single mode（20/40/60/80Km optional）, multi-mode
(2Km), wavelength: 1310nm, 1550nm
Console port: debug serial port carry out CLI command
Alarm port: 2 bit terminal block
1 channel relay alarm output
Transfer distance:
Twisted cable: 100M（standard CAT5/CAT5e cable）
Multi-mode: 1310nm, 2/5Km
Single-mode: 1310nm, 20/40/60Km
1550nm, 80/100/120Km

17
LED indicators:
Run indicator: Run
Interface indicator: Link (1~24)
Power supply indicator: PWR
Alarm indicator: Alarm
Power supply:
Input voltage: 100～240VAC
Type of input：3 bit terminal block
Overload Current Protection：1.2A
Consumption:
IT-ES5024-IM-P (100/240VDC):
Unload consumption: 7.4W
Full load consumption: 10.1W
IT-ES5024-IM-2F-P (100/240VDC):
Unload consumption: 8.7W
Full load consumption: 11.4W
IT-ES5024-IM-4F-P (100/240VAC):
Unload consumption: 10.0W
Full load consumption: 12.7W
IT-ES5024-IM-8F-P (100/240VDC):
Unload consumption: 12.6W
Full load consumption: 15.3W
IT-ES5024-IM-12F-P (100/240VAC):
Unload consumption: 15.2W
Full load consumption: 17.9W
IT-ES5024-IM-16F-P (100/240VDC):
Unload consumption: 17.8W
Full load consumption: 20.5W

18
IT-ES5024-IM-20F-P (100/240VDC):
Unload consumption: 19.4W
Full load consumption: 20.4W
IT-ES5024-IM-24F-P (100/240VAC):
Unload consumption: 22.0W
Full load consumption: 23.0W
Working environment:
Working temperature: -40～75℃
Storage temperature:-40～85℃
Relative Humidity: 5%~95% (no condensation)
Mechanical Structure:
Shell: IP30 protect grade, metal shell
Installation: 19” 1U rack
Size（W×H×D）: 441.6mm×45mm×208.9mm
Industry Standards:
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), Leve 4
EN61000-4-3 (RS), Level 3
EN61000-4-4 (EFT), Level 4
EN61000-4-5 (Surge), Level 4
EN61000-4-6 (CS), Level 3
EN61000-4-8, Level 5
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Certifications:
CE, FCC, RoHS, UL508 (Pending)
Warranty: 5 years