Intellisystem IT-ES5028-IM-4GS Series User manual

1
IT-ES5028-IM-4GS Series
Managed Industrial Ethernet Switch
User Manual

2
【Summarize】
IT-ES5028-IM-4GS series is managed industrial Ethernet switch. The IT-ES5028-IM-4GS-P(100/240VAC) industrial Ethernet switches consists of
24 Ethernet ports and 4 gigabit optical ports. The IT-ES5028-IM-4GS-2F-P (100/240VAC) consists of 22 Ethernet ports, 2 Fiber ports and 4 gigabit
optical ports. The IT-ES5028-IM-4GS-4F-P (100/240VAC) consists of 20 Ethernet ports, 4 Fiber ports and 4 gigabit optical ports. The
IT-ES5028-IM-4GS-8F-P (100/240VAC) consists of 16 Ethernet ports, 8 Fiber ports and 4 gigabit optical ports. The IT-ES5028-IM-4GS-12F-P
(100/240VAC) consists of 12 Ethernet ports, 12 Fiber ports and 4 gigabit optical ports. The IT-ES5028-IM-4GS-12F-P (100/240VAC) consists of 12
Ethernet ports, 12 Fiber ports and 4 gigabit optical ports. The IT-ES5028-IM-4GS-16F-P (100/240VAC) consists of 8 Ethernet ports, 16 Fiber ports
and 4 gigabit optical ports. The IT-ES5028-IM-4GS-24F-P (100/240VAC) consists of 24 Fiber ports and 4 gigabit optical ports that provide an
economical solution for your industrial Ethernet connection.
The IT-ES5028-IM-4GS series switches have an operating temperature range of -40 to 75°C, and are designed with low consumption and without
fan. The rugged hardware design makes the IT-ES5028-IM-4GS perfect for ensuring that your Ethernet equipment can withstand the rigors of
industrial applications.
SW-RingTM is designed as rapid redundancy network arithmetic. It provided recover technology for fault of rapid redundant network, the recovery
time<20ms.
【Packing list】
Please check the packaging and accessories by your first using.
Industrial Ethernet switch ⅹ1.
User manual ⅹ1.
CD ⅹ1.
Certificate of quality ⅹ1.
Warranty card ⅹ1.
Please inform us or our distributor if your equipments have been damaged or lost any accessories, we will try our best to satisfy you.
【Features】
High performance network exchange technology
Support IEEE802.3, IEEE802.3u, IEEE 802.3x IEEE802.1Q, IEEE802.1p, IEEE802.1D, IEEE802.1W.
Support 8K MAC address.
Support 12.8Gbps backboard bandwidth.
Support flow statistics.
10/100BaseT(X)(RJ45).
Store and forward switching process type.
Plug-and-play, auto MDI/MDI-X connection.
Support auto negotiation speed, F/H duplex mode, and auto send data control.
SW-Ring ring network patent technology (Fault recovery time<20ms）
Support WEB configuration.
Support MAC address learning, aging automatic.
Support port status display, data update.
Support RSTP, IGMP, port trunking and port mirroring.

3
Support rate control, Broadcast storm control.
Support 1 channel relay alarm output.
Reliable Industrial grade design
Industrial grade 4 design, -40-75℃work temperature
No fan design
IP30 protection grade
19 inch rack mounting
【Panel layout】
IT-ES5028-IM-4GS-P (100/240VAC)
Front panel
Rear panel
1. Restore factory settings.
2. Console port.
3. Link/ACT LEDs.
4. Systems running LED.
5. The power LED.
6. Relay alarm LED.
7. Hanger.
8. Power input and Relay output terminal block.
9. 1000Base-FX SFP port.
10. 10/100BaseT(X) (RJ45) ports.
11. Rear panel connector LEDs.

4
IT-ES5028-IM-4GS-2F-P (100/240VAC)
Front panel
Rear panel
1. Restore factory settings.
2. Console port.
3. Link/ACT LEDs.
4. Systems running LED.
5. The power LED.
6. Relay alarm LED.
7. Hanger.
8. Power input and Relay output terminal block.
9. 1000Base-FX SFP port.
10. 10/100BaseT(X) (RJ45) ports.
11. 100Base-FX ports.
12. Rear panel connector LEDs.
IT-ES5028-IM-4GS-4F-P (100/240VAC)
Front panel
Rear panel
1. Restore factory settings.
2. Console port.
3. Link/ACT LEDs.
4. Systems running LED.
5. The power LED.
6. Relay alarm LED.

5
7. Hanger.
8. Power input and Relay output terminal block.
9. 1000Base-FX SFP port.
10. 10/100BaseT(X) (RJ45) ports.
11. 100Base-FX ports.
12. Rear panel connector LEDs.
IT-ES5028-IM-4GS-8F-P (100/240VAC)
Front panel
Rear panel
1. Restore factory settings.
2. Console port.
3. Link/ACT LEDs.
4. Systems running LED.
5. The power LED.
6. Relay alarm LED.
7. Hanger.
8. Power input and Relay output terminal block.
9. 1000Base-FX SFP port.
10. 10/100BaseT(X) (RJ45) ports.
11. 100Base-FX ports.
12. Rear panel connector LEDs.

6
IT-ES5028-IM-4GS-12F-P (100/240VAC)
Front panel
Rear panel
1. Restore factory settings.
2. Console port.
3. Link/ACT LEDs.
4. Systems running LED.
5. The power LED.
6. Relay alarm LED.
7. Hanger.
8. Power input and Relay output terminal block.
9. 1000Base-FX SFP port.
10. 10/100BaseT(X) (RJ45) ports.
11. 100Base-FX ports.
12. Rear panel connector LEDs.
IT-ES5028-IM-4GS-16F-P (100/240VAC)
Front panel
Rear panel
1. Restore factory settings.
2. Console port.
3. Link/ACT LEDs.
4. Systems running LED.
5. The power LED.

7
6. Relay alarm LED.
7. Hanger.
8. Power input and Relay output terminal block.
9. 1000Base-FX SFP port.
10. 10/100BaseT(X) (RJ45) ports.
11. 100Base-FX ports.
12. Rear panel connector LEDs.
IT-ES5028-IM-4GS-20F-P (100/240VAC)
Front panel
Rear panel
1. Restore factory settings.
2. Console port.
3. Link/ACT LEDs.
4. Systems running LED.
5. Relay alarm LED.
6. The power LED.
7. Power input and Relay output terminal block.
8. 1000Base-FX SFP port.
9. 10/100BaseT(X) ports.
10.100Base-FX ports.
11.Rear panel connector LEDs.

8
IT-ES5028-IM-4GS-24F-P (100/240VAC)
Front panel
Rear panel
1. Restore factory settings.
2. Console port.
3. Link/ACT LEDs.
4. Systems running LED.
5. Relay alarm LED.
6. The power LED.
7. Power input and Relay output terminal block.
8. 1000Base-FX SFP port.
9. 100Base-FX ports.
10.Rear panel connector LEDs.
【Powersupply input】
The series rear panel provides 3 bit wiring terminal for AC100~240V power entered. Terminal diagram is as follows:
Important notice:
1. Power ON operation: first of all, insert power cable’s terminal block into device’s power port, then insert power supply plug into power source
2. Power OFF operation: First off all, unpin power plug, then strike the terminal block, please take care of operation sequence.

9
【Console port】
This series product provided 1pcs procedure test port based in serial port. It adopts RJ45 interface, located in top panel, can configure the CLI
command through RJ45 to DB9 female cable.
【Appearance and dimensions】
This series of dimensions length width height, between product series port number is different.
Unit（mm）

10
【Relay connection】
Relay access terminals in the rear panel of the device, next to the power input parts, R+ and R- are in the middle of the relay alarm output section. It
is used to detect both power failure and port failure. The open circuit state in normal non alarm state, when there is any alarm information to the
closed state. This series of single power supply device is 1 relay alarm output, external alarm lights or alarm buzzer or external switch signal
acquisition device in order to timely notify operators when an alarm occurs. (Single power supply power failure alarm is not supported)
【Communication connector】
10/100BaseT(X) Ethernet port
The pin out of RJ45 port display as below, connect by UTP or STP. The connect distance is no more than 100m. 100Mbps is used 120Ω of UTP 5;
10Mbps is used 120Ω of UTP 3, 4, 5.
RJ 45 port support automatic MDI/MDI-X operation. Can connect the PC, Server, Converter and HUB .Pin 1,2,3,6 Corresponding
connections in MDI. 1→3, 2→6, 3→1, 6→2 are used as cross wiring in the MDI-X port of Converter and HUB. 10Base-T/100Base-TX are used in
MDI/MDI-X, the define of Pin in the table as below.
NO.
MDI signal
MDI-X signal
1
TX+
RX+
2
TX-
RX-
3
RX+
TX+
6
RX-
TX-
4, 5, 7, 8
—
—
Note：“TX±”Transmit Data±，“RX±”Receive Data±，“—”Not Use.
MDI (straight-through cable)
1 8

11
MDI-X (Cross-over cable)
MDI/MDI-X auto connection makes switch easy to use for customers without considering the type of network cable.
100Base-FX Fiber port
100Base-FX full-duplex SM or MM port, SC/ST/FC type .The fiber port must be used in pair, TX (transmit) port connect remote switch’s RX
(receive) port; RX (receive) port connect remote switch’s TX (transmit) port.
The optical fiber connection supports the line to instruct enhance the reliability of network effectively.
Suppose: If you make your own cable, we suggest labeling the two sides of the same line with the same letter (A-to-A and B-to-B, shown as below,
or A1-to-A2 and B1-to-B2).
1000SFP fiber port (mini-GBIC)
1000BaseSFP fiber port adopts gigabit mini-GBIC transmission, can choice different SFP module according to different transfer distance.
Fiber interface must use for pair, TX port is transmit side, must connect to RX (receive side). The fiber interface support loss line indicator.
Suppose: If you make your own cable, we suggest labeling the two sides of the same line with the same letter (A-to-A and B-to-B, shown as below,
or A1-to-A2 and B1-to-B2).

12
【LED Indicators】
LED indicator light on the front panel of product, the function of each LED is described in the table as below.
System Indication LED
LED
State
Description
PWR
ON
Power is being supplied to
power input PWR input
OFF
Power is not being supplied
to power input PWR input
RUN
ON/OFF
System is not running well
Blinking
System is running well
Link/ACT
(1~24/G1~G4)
ON
Port connection is active
Blinking
Data transmitted
OFF
Port connection is not active
ALARM
ON
Has alarm information
OFF
No alarm information
【Installation】
Before installation, confirm that the work environment meet the installation require, including the power needs and abundant space. Whether it is
close to the connection equipment and other equipments are prepared or not.
1.Avoid in the sunshine, keep away from the heat fountainhead or the area where in intense EMI.
2. Examine the cables and plugs that installation requirements.
3. Examine whether the cables be seemly or not (less than 100m) according to reasonable scheme.
4. Power: 100-240VAC power input.
5. Environment：working temperature: -40～75°C.
Storage Temperature: -40～85°C.
Relative humidity 5%～95%.
Rack mount installation
In most of industrial application, it is convenience to use rack mount installation, the step of installation is as follows:
1. Check if have rack mount installation tools and components (The package provided parts of components).
2. Check installation place strong or not, have the place to install the device or not.
3. Put the device into rack, aim at the screw hole of device and rack, fixed it in strong screw. Easy and convenience to operation.
Wiring Requirements
Cable laying need to meet the following requirements,
1. It is needed to check whether the type, quantity and specification of cable match the requirement before cable laying;
2. It is needed to check the cable is damaged or not, factory records and quality assurance booklet before cable laying;
3. The required cable specification, quantity, direction and laying position need to match construction requirements, and cable length depends on
actual position;

13
4. All the cable cannot have break-down and terminal in the middle;
5. Cables should be straight in the hallways and turning;
6. Cable should be straight in the groove, and cannot beyond the groove in case of holding back the inlet and outlet holes. Cables should be banded
and fixed when they are out of the groove;
7. User cable should be separated from the power lines. Cables, power lines and grounding lines cannot be overlapped and mixed when they are in
the same groove road. When cable is too long, it cannot hold down other cable, but structure in the middle of alignment rack;
8. Pigtail cannot be tied and swerved as less as possible. Swerving radius cannot be too small (small swerving causes terrible loss of link). Its
banding should be moderate, not too tight, and should be separated from other cables;
9. It should have corresponding simple signal at both sides of the cable for maintaining.
【Specifications】
Technology:
Standard: Support IEEE802.3, IEEE802.3u, IEEE 802.3x, IEEE802.1Q, IEEE802.1p, IEEE802.1D, IEEE802.1W
Protocol:ARP、ICMP、TCP、UDP、DHCP、DNS、HTTP、Telnet、SW-RingTM、RSTP、SNMP
Flow control: IEEE802.3x flow control, back press flow control
Functions:
Switch function: SW-Ring, QOS, 802.1QVLAN, RSTP, SNMP, Port trunking, static multicast filter, port mirroring, bandwidth management,
broadcast storm control, port flow statistics, upgrade online, up and download configuration file, user name access system
SW-Ring: Support Single, Couple, Chain, Dual homing
Exchange attributes:
100M forward speed: 148810pps
1000M forward speed: 1488100pps
100M maximum filter speed: 148810pps
1000M maximum filter speed: 1488100pps
Transmit mode: store and forward
System exchange bandwidth: 12.8G
MAC address table: 8K
Memory: 4M
Interfaces:
Electric port: 10Base-T/100Base-TX auto speed control, Half/full duplex and MDI/MDI-X auto detect
100M optic fiber port: 100Base-FX, SC/ST/FC connector, support single-mode（20/40/60/80Km optional）, multi-mode (2Km), wavelength:
1310nm,
1550nm
1000M fiber port: 1000Base-FX（SFP port）
Console port: debug serial port carry out CLI command
Alarm port: 2 bit terminal block
1 channel relay alarm output

14
Transfer distance:
Twisted cable: 100M（standard CAT5/CAT5e cable）
Multi-mode: 1310nm, 2/5Km
Single-mode: 1310nm, 20/40/60Km
1550nm, 80/100/120Km
LED indicators:
Run indicator: Run
Interface indicator: Link (1~24/G1~G4)
Power supply indicator: PWR
Alarm indicator: Alarm
Power supply
Input voltage: 100～240VAC
Type of input：3 bit terminal block
Overload Current Protection：1.2A
Consumption
IT-ES5028-IM-4GS-P (100/240VDC):
Unload consumption: 7.4W
Full load consumption: 13.1W
IT-ES5028-IM-4GS-2F-P (100/240VDC):
Unload consumption: 8.7W
Full load consumption: 14.4W
IT-ES5028-IM-4GS-4F-P (100/240VAC):
Unload consumption: 10.0W
Full load consumption: 15.7W
IT-ES5028-IM-4GS-8F-P (100/240VDC):
Unload consumption: 12.6W
Full load consumption: 18.3W
IT-ES5028-IM-4GS-12F-P (100/240VAC):
Unload consumption: 15.2W
Full load consumption: 20.9W
IT-ES5028-IM-4GS-16F-P (100/240VDC):
Unload consumption: 17.8W
Full load consumption: 23.5W
IT-ES5028-IM-4GS-20F-P (100/240VDC):
Unload consumption: 19.4W
Full load consumption: 24.1W

15
IT-ES5028-IM-4GS-24F-P (100/240VAC):
Unload consumption: 22.0W
Full load consumption: 26.2W
Working environment:
Working temperature: -40～75℃
Storage temperature:-40～85℃
Relative Humidity: 5%~95% (no condensation)
Mechanical Structure:
Shell: IP30 protect grade, metal shell
Installation: 19” 1U rack
Size（W×H×D）: 441.6mm×45mm×208.9mm
Industry Standards:
EMI：FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), Level 4
EN61000-4-3 (RS), Level 3
EN61000-4-4 (EFT), Level 4
EN61000-4-5 (Surge), Level 4
EN61000-4-6 (CS), Level 3
EN61000-4-8, Level 5
Shock: IEC 60068-2-27
Free fall: IEC 60068-2-32
Vibration: IEC 60068-2-6
Certifications:
CE, FCC, RoHS, UL508 (Pending)
Warranty: 5 years