interion 695546 User manual

STEP 4
Attach Backrest “H” to the rear of mechanism with
Backrest Screws “I”. NOTE: Fully tighten all screws.
STEP 5
Place seat assembly onto Gas Lift “J”. Push firmly on the
chair seat to securely attach seat assembly to seat post.
ARM HEIGHT ADJUSTMENT
SEAT HEIGHT ADJUSTMENT
FOOTRING HEIGHT ADJUSTMENT
To adjust arm height, push button (1) in to allow the arms
to move up or down freely, release button (1) once the desired
height is reached.
To raise seat height, remove pressure from the seat
and lift handle (2). To lower seat height,
sit on the chair and lift handle (2).
To adjust footring height, loosen the adjustment knob (3),
adjust footring to desired height and then tighten
the adjustment knob (3) completely to secure footring into position.
Mesh Back Task Stool
H
L
Ix 3
J
1
2
3

Mesh Back Task Stool
STEP 1
Turn Base “B” upside down.
Insert Casters “A” into Base “B”.
STEP 2
Slide Gas Lift “J” through Footring “K” and into Base “B”.
STEP 3
Attach Right Armrest “D” to Seat Cushion “C” with Armrest Screws “F”
and Washers “G”. Repeat for Left Armrest “E”. NOTE: Arrows on
armrests point to front of seat cushion and fully tighten all screws.
Model: 695546
Model: 695547
Model: 695548
Model: 695964
Armrest Screws
D 1/4” x L 1”
6
Backrest Screws
D 5/16” x L 1-9/16”
Backrest
Washers
6
Seat Cushion
(With Mechanism
Pre-installed)
3
Footring
x 5
A
B
J
K
B
x 3
E
C
G
D
F
G
x 3
F
x 3
x 3
L