Intermec CK61G Installation and operating instructions

CK61G
Handheld Computer
Addendum

ii CK61G NI Handheld Computer
Intermec Technologies Corporation
Worldwide Headquarters
6001 36th Ave.W.
Everett, WA 98203
U.S.A.
www.intermec.com
The information contained herein is provided solely for the purpose of allowing customers to operate and
service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose
without written permission of Intermec Technologies Corporation.
Information and specifications contained in this document are subject to change without prior noticed and do
not represent a commitment on the part of Intermec Technologies Corporation.
© 2007 by Intermec Technologies Corporation. All rights reserved.
The word Intermec, the Intermec logo, Norand, ArciTech, Beverage Routebook, CrossBar, dcBrowser,
Duratherm, EasyADC, EasyCoder, EasySet, Fingerprint, INCA (under license), i-gistics, Intellitag, Intellitag
Gen2, JANUS, LabelShop, MobileLAN, Picolink, Ready-to-Work, RoutePower, Sabre, ScanPlus, ShopScan,
Smart Mobile Computing, SmartSystems, TE 2000, Trakker Antares, and Vista Powered are either trademarks
or registered trademarks of Intermec Technologies Corporation.
There are U.S. and foreign patents as well as U.S. and foreign patents pending.

CK61G NI Handheld Computer Addendum 3
CK61G Non-Incendive (NI) Handheld Computer Addendum
The users of this product are cautioned to use accessories and peripherals
approved by Intermec Technologies Corporation. The use of accessories
other than those recommended, or changes to this product that are not
approved by Intermec Technologies Corporation, may void the compliance
of this product and may result in the loss of the user’s authority to operate
the equipment.
Shipping Information
Your CK61G Non-Incendive (NI) Handheld Computer ships with the
following:
• Power supply and cord
• Standard battery
• Spare battery
• Tethered stylus
• Spare stylus
• Charging dock
• SD card (256 MB)
•Strap
Key Features and Connection Information
The CK61G differs from the CK61 Handheld Computer in these areas:
• Security features
• Contact Memory Device (CMD) support
• Assured radio deactivation feature
• Bluetooth not supported
Operating System
The CK61G runs Windows Mobile 5.0 only.
Security
The CK61G uses the standard 802.11 wireless security features, which can
be configured using the Setup Assistant.
Available under AIT-III CLIN 0040, FIPS (Federal Information Processing
Standard) security can be ordered separately.
Caution: This marking indicates that the user should read all included
documentation before use.

4 CK61G NI Handheld Computer Addendum
Assured Radio Deactivation
The Assured Radio Deactivation feature allows you to deactivate 802.11
radio transmission. Once deactivated, the radio remains off until activated
by the user.
To access Assured Radio Deactivation
1Tap the iConnect icon in the lower right corner of the Windows Mobile
Start Screen. The menu appears with these options:
2Select Enable. The menu that then appears allows you to choose from
these options:
3To toggle the radio state, tap Assured Radio Deactivation.
The CK61G immediately cold boots, and when restarting, your
CK61G displays a dialog box with this message:

CK61G NI Handheld Computer Addendum 5
4Tap OK and a green (safe) status indicator displays next to the iConnect
icon in the bottom right corner of the display. This green symbol
indicates the radio is deactivated and the CK61G radio is transmitting
no RF energy.
When you tap the iConnect menu item Assured Radio Deactivation to
toggle on (or off) this radio deactivation feature, the CK61G immediately
cold boots and returns to operation in the selected state (either off or on).
When cold booting, your CK61G displays the state of Assured Radio
Deactivation, which appears in the dialog box following the restart.
Contact Memory Device
The CK61G provides an interface to Contact Memory Devices (CMD)
with a CMD probe. The probe allows the CK61G to read from or write to
the CMD.
The CK61G software includes MacSema drivers to enable the MacSema
probes. The probes attach to your CK61G using a serial connector on an
Intermec serial adapter.
These probes can be ordered via CLIN 0020 and CLIN 0024; both include
the Intermec serial adapter.
In-Dock Communication
When the CK61G is placed in its charging dock and a network connection
is established via USB, Ethernet, or serial connection to the host PC, the
radio is disabled. Your CK61G communicates with a host PC or other
device using the interface for the docking station (USB and ActiveSync,
Ethernet, or serial cable).
Assured Radio Deactivation Indicators
Indicator
Assured
Radio
Deactivation
Radio
State
iConnect
indicator
color Transmit State
DOn Deactivated Green No radio transmission.
Safety on:
• No RF energy
transmitted.
XOff Active Red Radio can transmit.
Safety off:
• RF energy transmitted.

6 CK61G NI Handheld Computer Addendum
To confirm radio status in-dock
1Tap iConnect.
2Tap Status.
3Tap Wireless. The Wireless Status dialog box appears. If radio
communication is enabled and active, then the Wireless Status dialog
box appears:
4Tap Xto close the window.
Bluetooth Radio
By design, the CK61G does not provide power for Bluetooth; the CK61G
will not recognize Bluetooth radio devices.
Radio Country Codes
Change the country code using the CK61G Setup Assistant when the
computer starts up the first time. To later change the country codes, use
Intermec Settings.
Configuring the CK61G With the Setup Assistant
The Setup Assistant starts automatically the first time you turn on the
CK61G. Use the Setup Assistant to set or enable basic network parameters
and connect your CK61G to the network.
The Setup Assistant guides you through setting the following basic network
parameters:
• Date and time (including time zone)
• SSID (Network name)
• 802.1x security
• DHCP server or IP address, subnet mask, and default router
• Primary and secondary DNS and WINS addresses

CK61G NI Handheld Computer Addendum 7
• Device name
• Radio country code
To set other parameters, use Intermec Settings or another configuration
method.
To use the Setup Assistant
1Tap Start > Programs > File Explorer, and then scroll to Setup
Assistant.
2Double-tap Setup Assistant.
3Tap Next to start using Setup Assistant. The Date screen appears.

4Set the date and tap Next. The Time Setup screen appears.
5Set the time. Tap Next and the Daylight Time Setup screen appears.
6Set the daylight time if you want to automatically adjust the clock for
daylight savings time changes and tap Next.
7Tap Yes if you want to configure the radio country code. If you choose
Yes, you will also need to tap the keyboard icon on the display and enter
the password which is cfg802bg.
8Scroll through the list and select the radio country code you want to use
and tap Next.
9Tap Yes to set up any 802.11 security settings . Once you are finished
setting up your security settings tap Next to continue.
Note: The CK61G uses the standard 802.11 wireless security features.
Available under AIT-3 CLIN 0040, FIPS (Federal Information
Processing Standard) security can be ordered separately.

CK61G NI Handheld Computer Addendum 9
10 Tap Yes if you want to obtain the IP address from a DHCP server or tap
No if you want to specify the IP address. Tap Next when you are
finished.
11 Specify a device name for the CK61G and tap Next to go to the next
screen.
12 Tap Yes if you want your settings to be saved if you cold boot the
CK61G or tap No if settings can be deleted.

Worldwide Headquarters
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel [phone]
fax [phone]
www.intermec.com
CK61G Non-Incendive (NI) Handheld Computer Addendum
*941-004-002*
P/N 941-004-002