Interquartz Voyager 9281P User manual

OPERATING INSTRUCTIONS
Specialty phone
Model 9281P

1
This Interquartz telephone has been manufactured to very high standards and
is very easy to use. Please read this manual carefully to find out how to use the
features.
CONTENTS
1. Important Notes ..............................................................................2
Intended use..........................................................................................................2
Telephone facilities ................................................................................................2
REN number..........................................................................................................3
Emergency calls ....................................................................................................3
2. Installation ......................................................................................4
Connection ............................................................................................................4
Wall mounting........................................................................................................4
3. Telephone Features ........................................................................6
Memory Buttons ....................................................................................................6
Ringer Indicator .....................................................................................................6
Ringer Volume Switch ...........................................................................................7
Ringer Pitch Control ..............................................................................................7
4. Operation ........................................................................................8
5. Maintenance and Problem Solving ...............................................9
7. Warranty and Service ...................................................................10

2
1. Important Notes
Intended use
This apparatus is intended for use on 2 wire analogue PSTN and PABX circuits
within Europe.
Declaration of Conformity
Interquartz (UK) Limited declares under its sole responsibility that this
product Model : VOYAGER MEMORY PHONE
Is in conformity with the following relevant harmonized standards
Health & Safety EN60950 : 1992
Electromagnetic Compatibility EN55022 : 1998 & EN55024 : 1998
Telecom EN301437 : 1999 & TBR38 : 1998
Following the provisions of Council Directive on radio equipment and
telecommunications terminal equipment. January 2001
Telephone facilities
This telephone has been designed for the use of the following facilities :
• recall (timed break only)
• ringer volume control
• ringer pitch control
• ringer indicator
• 10 programmed memory button (optional one button)

3
REN number
The REN number of this telephone is 1.
If you wish to connect any other equipment to the line, simply add the REN
numbers of each piece together and ensure that the total does not exceed
4. If too many phones are connected to the line, the circuit may be
overloaded and your telephone may not ring.
Not all telephones have the same REN.
If a British Telecom phone is supplied unmarked, you can assume that it
has a REN of 1
Emergency calls
Calls can be made on this telephone to contact the emergency services. The
European code for emergency services is 112, however, you can still use 999
in the UK. An access code may also be required, if the phone is connected to a
PABX.

4
2. Installation
This telephone is designed to plug straight into a modular style socket. If you do
not have one of these sockets, they can be obtained from your Network Supplier.
Connection
Insert the line cord into the socket. Set the ringer volume control, and ringer pitch
adjust as desired.
Wall mounting
Using the template supplied, position the telephone where you want to wall
mount. Drill two holes and fix roundheaded screws, leaving them slightly proud
of the surface. Position the telephone over the screws and slide downwards into
place.
FOR WALL MOUNT
Figure 1 Wall Mounting

5
To enable the handset to be supported in the cradle when the phone is mounted
on the wall, follow the procedure shown in Figure 3 to reserve the HANDSET
RETAINER.
1. Use screw-driver to push the
HANDSET RETAINER 2. Push the HANDSET RETAINER out of the slot
4. Insert the HANDSET RETAINER
back into it's slot
3. Turn the HANDSET
RETAINER 180
Figure 2 Handset Retainer for Wall Mounting

6
3. Telephone Features
To help you find your way round the telephone, various features and buttons are
briefly described below. You should refer to the relevant section of this user guide
to learn how to use the features available.
Memory Buttons
This telephone has 10 direct access memory buttons, all of which can only be
preprogrammed . These codes will have been specified by the person in your
organisation responsible for purchasing the telephones.
Ringer Indicator
Flashes when the telephone rings with an incoming call.
Figure 3 General Appearance
UNDERNEATH OVERLAY
PROGRAM SOCKET
RINGER INDICATOR
(NEON MESSAGE WAIT)
MEMORY KEY
(REMOVEABLE KEY CAP)
HANDSET CORD
HANDSET

7
UNPLUG THE CONNECTION
TO THE NETWORK BEFORE
OPENING THIS COVER
RINGER
PITCH
HEADSET
MIC ADJUST
Ringer Volume Switch
Located on the base of the unit (see Figure 4). Move switch to select no sound
(OFF), muted sound (LOW) or full sound (HIGH) for ringing on incoming call.
Ringer Pitch Control
On the base of the unit. Allows the pitch of the ringer to be altered from a high
pitch to a low pitch.
RINGER PITCH
ADJUST SWITCH
Figure 4 Bottom View
LINE JACK RDINGER
HI / LOW / OFF

8
4. Operation
The instructions here can only be of a general nature because the memory
buttons are specific to the requirements of the way you company wishes the
features to be used. Your PABX manager should issue you with instructions
outlining the features in use on your telephone.
To make an outgoing call
- lift the handset
- press the appropriate button and the "number/feature" stored behind the button
will be executed.

9
5. Maintenance and Problem Solving
Your telephone is a precision electronic instrument. Avoid rough handling and
extreme temperatures. Use a mild detergent and a damp cloth when cleaning.
Never use a stronger cleaner.
If your telephone does not appear to be working correctly, please check the
following :
No Dial tone - Is phone cord properly connected to the wall socket?
Will not ring - ringer switch is set to off?
- REN number may exceed 4, disconnect a phone until the
number is below 4.
If there are still problems, and you have more than one telephone:
Remove the “problem” phone. Insert another phone and check that it works. If
“yes” then the “problem” phone is possibly faulty. If not, then you may have a
faulty line. Try using the other socket and see which phones work. If you do have
a faulty line then you should contact your Network Supplier.
You should however be aware that if you request them to repair a fault that is
found not to be their’s, then they are entitled to charge you for a visit.
In the event that you still have problems then you should consult your supplier.