Interra ITR661-001 User manual

DS200203154AEN© 2020 INTERRA
ITR661-001 - Indoor Intercom Panel with Android OS
DESCRIPTION
ITR661-001 is a Indoor Panel Unit with Android OS panel that mainly
used for make interacting between the related outdoor intercom unit. It
can be connected to Interra outdoor intercom devices for audio, video
communication also unlocking and monitoring features. With these
functions residents can enjoy crystal clear audio communication, can
check the call records and unlock the door remotely. Besides, the
ITR661-001 indoor panel supports 8 different alarm zones with three
different scenario setup. Black housing is quite proper to align with the
interior design of the home.
In addition, the ITR661-001 delivers the ultimate touch screen experi-
ence in a space saving design featuring an amazing 7" with capacitive
touch feature. It complies with SIP, VOIP standard for easy integration
in every SIP, VOIP capable devices.
1/2
Device ITR661-001
Power Supply 12V, PoE
Power Consumption
3W (Standby Power)
10W (Rated Power)
Display Screen 7” TFT LCD Screen , 1024x600
Communication TCP/IP, SIP, VOIP, RTSP
Communication (optional) Wi-Fi / Bluetooth Communication
CPU 1.5 GHz
Interface RS485, siren x1 , alarm zone x8
Memory
1 GB SD Ram
4 GB Flash
32 GB Micro SD Card
Buttons 5 Buttons : Answer, Reject, Call, Camera Monitor,
Unlock
Operating System Android 4.4.2
Type of Protection IP 30
Temperature Range
Operation (-5°C...55°C)
Storage (-10°C...70°C)
Maximum Air Humidity < 90 RH
Material Acrylic Panel + ABS Casing
Colour Black
Flammability Non-flammable product
Dimensions 220x166.5x21.5 mm (WxHxD)
Configuration via Webpage of Indoor Monitor
ITR661-001 is a Indoor Panel Unit with Android OS panel that mainly
used for make interacting between the related outdoor intercom unit.
ITR661-001 product features are described below :
• VOIP: Support video call, camera monitor, unlock, VOIP communi-
cation and check the call records.
• Security: It supports 8 different regions with 3 different scenarios.
• Operating system: Android 4.4.2
• Automation Controls : Automation system can be controlled with
Icontrol.
• Monitoring the outdoor intercom unit camera and user interface
customization.
• Monitoring up to 10 cameras via RTSP with Icontrol.
• Support Android systems applications.
INSTALLATION
The following figure, shows a proper location of the installation :
During the installation, the camera should be 1450-1550mm above
the ground. The camera tether for photographing human face
should be the top priority.
FUNCTIONS

DS200203154AEN© 2020 INTERRA
2/2
Power:
Power input interface connects with 12V power adapter. The following
figure shows the connection diagram.
2/2
Siren/Alarm:
When alarm sensor is triggered, the output power is 12V / 100mA.
Each interface of alarm zone can be connected with normally-open or
normally-closed switch.
CONNECTION DIAGRAM & FEATURES
The following subtitles describe the related connection parts of the
ITR661-001 indoor touch panel : System Diagram, Power, Siren/
Alarm, RS-485/Audio Extension, Network.
System Diagram:
The following figures shows the connectors of the ITR661-001.
TROUBLESHOOTING
Some common failures and troubleshooting methods are listed for your
reference. In case of failure which cannot be repaired, do not disassemble
or repair the product by yourself. Please contact the after-sales technical
service department.
RS-485/Audio Extension:
Connect with outdoor panel, management center, indoor monitor or
other network equipment by network switch. Supply power by PoE
network switch if it is with PoE function.
The indoor monitor cannot start up or power off automatically.
• Check whether it has power failure, and power it on again.
The indoor monitor display screen is too dim.
• Check whether the brightness and contrast settings of screen
are correct.
No sounding during the communication
• Check whether the indoor monitor is set as mute mode, or the
volume is set to the lowest value.
The indoor monitor cannot monitor the outdoor panel
• Other user is using the system, so you can use it once he
finished the operation.
Multimedia files cannot be played normally.
• Check whether the system supports the file format. Please
refer to multimedia setting for details.
No response when clicking indoor monitor display screen
• Press “Unlock” button for 5s, or slowly slide horizontally or
vertically on the LCD to make touchscreen calibration. It need
to be calibrated twice.
Touchscreen responses slowly or cannot make calibration
• Ensure the finger is dry and clean when clicking touch screen
• Restart the device to clear any temporary software error.
Network:
Connect with outdoor panel, indoor monitor or other network
equipment by network switch. When indoor monitor has PoE function,
the interface can supply power by connecting with PoE network
switch. If network interface has 12V power supply, pin No. 4 and 5 of
RJ45 interface should connect with +12 of power interface, and pin
No. 7 and 8 should connect with GND of power interface.