Intertech ST-2513 User manual

Manual
Hot-Swap frames
ST-2513
ST-2523
ST-3515
ST-3525
ST-7227U
ST-8213U

Danger and protection
Don´t apply external force to the device.
Don´t use the device with wet hands (can
cause damages).
In spite of a special process of production
and careful controls some edges could be
not polished. Please take care of that to
avoid injuries.
Disposal
In case of disposal your power supply,
please dispose it by using the official way. In
case of questions for that, contact your
municipality or local dealer.
Maintenance
The device needs generally no maintenance.
In case of dust or dirt take it up with a
vacuum cleaner.
Intended use
This product is only for indoor use and for
mounting of hard disks inside computer
cases. Don´t use or store this product close
to water or in humid rooms.
.
For your safety, please read this manual
carefully before installation or using. Keep
this safety instructions and forward it when
you forward the product.
Depending model one or two 2,5" or 3,5"
harddisks can be mounted:
Model Space
Mounting options
ST-25133,5“ bay
1x 2,5“ HDD/ SSD
ST-25233,5“ bay
2x 2,5“ HDD/ SSD
ST-35155,25“ bay
1x 3,5“ HDD/ SSD
ST-35252x 5,25“ bay
2x 3,5“ + 1x 2,5“ HDD/ SSD
.
ST-8213PCIPCI slot
1x 2,5“ HDD/ SSD
ST-7227U3,5“ bay
1x 2,5“ HDD/ SSD

Take out the product and check the package
content for completeness or damages. In
case of missing parts or external damages,
please contact your local dealer for
replacement. Please keep the original
package for shipping in case of warranty
case.
Dispose cardboard and plastics from pack-
age according your local law.
Preparation
Warranty terms
Inter-Tech grants 12 months warranty by
proper use up from the date of purchase. In
case of warranty please contact your local
dealer or the dealer from which you bought
the product. Please look also at our complete
warranty terms on our website www.inter-
tech.de – Information – Warranty Terms.
ST-2523:
Set two SATA data cables between device
and Mainboard and two SATA power cables
from your power supply to the device. The
device is now ready to use.
ST-2513:
Installation
Put the device into a free external 3,5" bay.
Position it at the front panel and fix it with
screws.
Set a SATA data cable between device and
Mainboard and a SATA power cable from
your power supply to the device. The device
is now ready to use.
Put the device into a free external 3,5" bay.
Position it at the front panel and fix it with
screws.

Set three SATA data cables between device
and Mainboard and two SATA power cable
from your power supply to the device. The
device is now ready to use.
Put the device into a free external 5,25" bay.
Position it at the front panel and fix it with
screws.
Put the device into two free external 5,25"
bays. Position it at the front panel and fix it
with screws.
ST-3515:
Set a SATA data cable between device and
Mainboard and a SATA power cable from
your power supply to the device. The device
is now ready to use.
ST-3525:
ST-7227U:
Put the device into a free PCI slot of the
case.
Set two SATA data cables between device
and Mainboard and two SATA power cables
from your power supply to the device. Put the
USB cable into a free USB 3.0 port onto your
Mainboard. The device is now ready to use.
ST-8213PCI:
Probably you have to remove the slot bracket
first. In case the bracket is stamped be
careful breaking it out to avoid injuries.
Put the device into a free external 5,25" bay.
Position it at the front panel and fix it with
screws.
Fix the device at the case. Set a SATA data
cable between device and Mainboard and a
SATA power cable from your power supply to
the device. The device is now ready to use.

Use
To take out the hard disk open the door like
above till you can pick it with your fingers.
Open the door of the device using the
included key. Put a hard disk into the device
and close the door slowly.
D-30855 Langenhagen
Contact
Inter-Tech Elektronik Handels GmbH
Hainhäuser Weg 93
Germany
Web: www.inter-tech.de
Email: [email protected]