IntesisBox IBBACMEB0100000 User manual

IntesisBox®BACnet Server
M-Bus Meters
User Manual
r1.0 eng
Issue date: 09/2017

IntesisBox®BACnet Server –M-Bus User Manual r1.0 eng
URL
email
tel
http://www.intesisbox.com
[e-mail]
[phone]
© Intesis Software S.L.U. - All rights reserved
IntesisBox is a registered trademark of Intesis Software SLU
2/41
© Intesis Software S.L.U. 2017 All Rights Reserved.
Information in this document is subject to change without notice. The software described in this document is furnished
under a license agreement or nondisclosure agreement. The software may be used only in accordance with the terms
of those agreements. No part of this publication may be reproduced, stored in a retrieval system or transmitted in
any form or any means electronic or mechanical, including photocopying and recording for any purpose other than
the purchaser’s personal use without the written permission of Intesis Software S.L.U.
Intesis Software S.L.U.
Milà i Fontanals, 1 bis
08700 Igualada
Spain
TRADEMARKS
All trademarks and trade names used in this document are acknowledged to be the copyright of their respective
holders.

IntesisBox®BACnet Server –M-Bus User Manual r1.0 eng
URL
email
tel
http://www.intesisbox.com
[e-mail]
[phone]
© Intesis Software S.L.U. - All rights reserved
IntesisBox is a registered trademark of Intesis Software SLU
3/41
Gateway for the integration of M-Bus devices into BACnet MSTP
or BACnet IP enabled monitoring and control systems.
Order code:
IBBACMEB0100000, 10 M-Bus devices
IBBACMEB0200000, 20 M-Bus devices
IBBACMEB0600000, 60 M-Bus devices
IBBACMEB1200000, 120 M-Bus devices

IntesisBox®BACnet Server –M-Bus User Manual r1.0 eng
URL
email
tel
http://www.intesisbox.com
[e-mail]
[phone]
© Intesis Software S.L.U. - All rights reserved
IntesisBox is a registered trademark of Intesis Software SLU
4/41
INDEX
1Description ...............................................................................................................................................6
Introduction.......................................................................................................................................6
Functionality .....................................................................................................................................7
1.2.1 Signals......................................................................................¡Error! Marcador no definido.
Gateway’s capacity ..........................................................................................................................8
2Protocol Implementation Conformance Statement..................................................................................9
BACnet Standardized Device Profile (Annex L):..............................................................................9
Segmentation Capability: .................................................................................................................9
Data Link Layer Options:..................................................................................................................9
Device Address Binding: ................................................................................................................10
Networking Options:.......................................................................................................................10
Character Sets Supported..............................................................................................................10
Gateway .........................................................................................................................................10
3BACnet Interoperability Building Blocks Supported (BIBBs) .................................................................11
Data Sharing BIBBs .......................................................................................................................11
Alarm and Event Management BIBBs............................................................................................11
Scheduling BIBBs...........................................................................................................................12
Trending BIBBs ..............................................................................................................................12
Network Management BIBBs.........................................................................................................12
Device Management BIBBs ...........................................................................................................13
4Service Types ........................................................................................................................................14
5Objects...................................................................................................................................................15
Supported Object Types.................................................................................................................15
Objects and properties ...................................................................................................................16
5.2.1 IBOX-BAC-MBM (Device Object Type) ..................................................................................16
5.2.2 Analog Input Object Type.......................................................................................................18
5.2.3 Analog Output Object Type ....................................................................................................19
5.2.4 Analog Value Object Type......................................................................................................20
5.2.5 Binary Input Object Type........................................................................................................21
5.2.6 Binary Output Object Type .....................................................................................................22
5.2.7 Binary Value Object Type.......................................................................................................23
5.2.8 Multistate Input Object Type...................................................................................................24
5.2.9 Multistate Output Object Type................................................................................................25
5.2.10 Multistate Value Object Type..................................................................................................26
5.2.11 Calendar Object Type.............................................................................................................27
5.2.12 Schedule Object Type ............................................................................................................28
5.2.13 Notification Class Object Type ...............................................................................................29
5.2.14 Trend Log Object Type...........................................................................................................30
5.2.15 Trend Log Multiple Object Type .............................................................................................31
6Connections ...........................................................................................................................................32
Powering the device.......................................................................................................................33
Connection to BACnet....................................................................................................................33
6.2.1 BACnet IP...............................................................................................................................33
6.2.2 BACnet MSTP ........................................................................................................................33
Connection to M-Bus......................................................................................................................34
Connection to the configuration tool...............................................................................................34
7Set-up process and troubleshooting ......................................................................................................35
Pre-requisites .................................................................................................................................35
IntesisBox MAPS. Configuration & monitoring tool for IntesisBox BACnet series.........................35
7.2.1 Introduction.............................................................................................................................35
7.2.2 Connection..............................................................................................................................35
7.2.3 Configuration tab ....................................................................................................................36
7.2.4 Signals....................................................................................................................................36
7.2.5 Sending the configuration to IntesisBox.................................................................................37
7.2.6 Diagnostic...............................................................................................................................37
Set-up procedure............................................................................................................................39
8Electrical & Mechanical Features...........................................................................................................40

IntesisBox®BACnet Server –M-Bus User Manual r1.0 eng
URL
email
tel
http://www.intesisbox.com
[e-mail]
[phone]
© Intesis Software S.L.U. - All rights reserved
IntesisBox is a registered trademark of Intesis Software SLU
5/41
9Dimensions ............................................................................................................................................41

IntesisBox®BACnet Server –M-Bus User Manual r1.0 eng
URL
email
tel
http://www.intesisbox.com
[e-mail]
[phone]
© Intesis Software S.L.U. - All rights reserved
IntesisBox is a registered trademark of Intesis Software SLU
6/41
1 Description
Introduction
This document describes the integration of M-Bus meters with BACnet ASHRAE 135 –2001 Annex J - BACnet
protocol compatible devices or systems using the gateway IntesisBox BACnet/IP Server - M-Bus.
The aim of this integration is to make accessible M-Bus devices signals and resources from a BACnet based control
system or device, as if it was a part of the own BACnet system and vice-versa.
The gateway acts as a BACnet/IP Server or BACnet MSTP device in its BACnet interface, allowing other BACnet
devices to perform subscription (COV) requests and reads/writes to its internal points. From the M-Bus point of view,
IntesisBox acts as a M-Bus master device (EN-1434-3), the readings of the M-Bus slave device(s) is performed by
IntesisBox by automatic continuous polling.
IntesisBox incorporates and embeded M-Bus level converter, so no extra hardware is required.
Configuration is carried out using the configuration software IntesisBox®MAPS.
This document assumes that the user is familiar with BACnet and M-Bus technologies and their technical terms.
Integration of MBUS devices
to BACnet IP or MSTP control and monitoring systems
BACnet/IP
BACnet MSTP
Ethernet TCP
MBUS

IntesisBox®BACnet Server –M-Bus User Manual r1.0 eng
URL
email
tel
http://www.intesisbox.com
[e-mail]
[phone]
© Intesis Software S.L.U. - All rights reserved
IntesisBox is a registered trademark of Intesis Software SLU
7/41
Functionality
IntesisBox polls, either continuously or only when ordered from the BACnet side, the M-Bus devices to obtain updated
readings for the points configured in it (the points corresponding to measures and states of the meters in the
integration points list explained later in this document). With every read, the new values received are updated in the
Intesisbox's memory and become available in the BACnet side. When a change in any point configured as output in
IntesisBox is detected (this is written from the BACnet side), the corresponding action in the M-Bus device will be
performed. These actions can be: force a polling of a specific M-Bus device or force a polling of all M-Bus devices.
The polling of a specific M-Bus device, or of all M-Bus devices, can be forced in any moment from BACnet side by
writing a 1 in the corresponding binary point specially enabled for this purpose in the IntesisBox.
The automatic continuous polling of all M-Bus devices can be activated/deactivated writing from BACnet in a specific
binary point specially enabled for this purpose in the IntesisBox.
Other M-Bus information accessible from BACnet, using specific points of the IntesisBox, is:
•Bus activity (indicates if meters are currently being polled or if polling is in stand-by).
•M-Bus status of every meter (this M-Bus status is sent by the own meter with every poll and indicates the
internal status, manufacturer specific in every case).
These are the main features of the M-Bus interface of IntesisBox:
•Embedded level converter. Direct connection to M-Bus devices with no extra hardware required.
•Scan option to automatically detect M-Bus devices and its available registers.
•Import/Export of M-Bus device templates.
•EIA485 two wires (plug-in terminal bloc with screws) connection.
•Baud rate configurable from 300 to 9600 bps (allowed baud rates in M-Bus. The devices are normally
configured at 2400 bps at the factory).
•Primary or secondary addressing allowed.
•Useful timeouts and specific parameters to make the interface widely compatible with many meter's
peculiarities found usually between different manufacturers.
•Polling of the meters can be continuously, either configured in the own IntesisBox or you can
activate/deactivate continuous polling of the meters from BACnet side using a special datapoint.
•You can force a polling of the meters (refresh of readings) in any moment from BACnet side using special
datapoints: one datapoint to force a polling of all the meters, and one specific datapoint per meter to force
the polling of the individual meter.
•IntesisBox can also be configured to make a single polling of the meters (refresh of readings) at the start
up.
•For each meter, a datapoint is available in BACnet indicating communication error with the meter, also a
general communication error datapoint is available (that will be active whenever the communication with
one or more meters has failed).
•Fully flexible configuration of the registers to poll in the meter, to adapt to any meter.
Every meter, depending on manufacturer and model, offers different type of signals from the mentioned before. To
know what signals offers the meter and of what type, to be able to integrate those wanted, refer to the device technical
documentation. Anyway, and to ease and speed up the identification of the signals offered by any device (and of
what type), the scan option is highly recommended or the import of templates too.

IntesisBox®BACnet Server –M-Bus User Manual r1.0 eng
URL
email
tel
http://www.intesisbox.com
[e-mail]
[phone]
© Intesis Software S.L.U. - All rights reserved
IntesisBox is a registered trademark of Intesis Software SLU
8/41
Gateway’s capacity
IntesisBox capacity is listed below:
Element
10
version
20
version
60
version
120
version
Notes
Type of BACnet
devices
IP / MSTP
Communication with BACnet IP and MSTP.
Number of BACnet
Objecs
250
500
1500
3000
Maximum number of points that can be
defined in the virtual BACnet device inside the
gateway.
Number of BACnet
Subscriptions (COV)
requests
500
1000
3000
6000
Maximum number of BACnet subscriptions
(COV) requests accepted by the gateway.
Type of M-Bus
devices
M-Bus EIA485 Slave devices
Those supporting M-Bus EN-1434-3 standar.
Communication over RS485
Number of M-Bus
slave devices
10
20
60
120
Number of M-Bus slave devices supported
by the gateway.
Number of M-Bus
signals
250
500
1500
3000
Number of M-Bus signals (readings in the
meters) that can be read from IntesisBox.

IntesisBox®BACnet Server –M-Bus User Manual r1.0 eng
URL
email
tel
http://www.intesisbox.com
[e-mail]
[phone]
© Intesis Software S.L.U. - All rights reserved
IntesisBox is a registered trademark of Intesis Software SLU
9/41
2 Protocol Implementation Conformance Statement
BACnet Protocol Implementation Conformance Statement (PICS)
Date: 2017-09-18
Vendor Name: Intesis Software SLU
Product Name: IBOX-BAC-MEB
Product Model Number: IBOX-BAC-MEB
Application Software Version: 1.0
Firmware Revision: 1.0.0.0
BACnet Protocol Revision: 12
Product Description:
M-Bus –BACnet MS/TP & BACnet IP Gateway
Abstraction of M-Bus slave device registers as BACnet Objects.
BACnet Standardized Device Profile (Annex L):
BACnet Operator Workstation (B-OWS)
BACnet Building Controller (B-BC)
BACnet Advanced Application Controller (B-AAC)
BACnet Application Specific Controller (B-ASC)
BACnet Smart Sensor (B-SS)
BACnet Smart Actuator (B-SA)
Additional BACnet Interoperability Building Blocks Supported (Annex K):
Reference of BIBBs List
Segmentation Capability:
Segmented request supported No Yes Window Size · 16 ·
Segmented responses supported No Yes Window Size · 16 ·
Data Link Layer Options:
BACnet IP, (Annex J)
BACnet IP, (Annex J), Foreign Device
ISO 8802-3, Ethernet (Clause 7)
ANSI/ATA 878.1, 2.5 Mb. ARCNET (Clause 8)
ANSI/ATA 878.1, RS-485 ARCNET (Clause 8), baud rate(s) ____
MS/TP master (Clause 9), baud rate(s): 9600, 19200, 38400, 57600, 76800, 115200
MS/TP slave (Clause 9), baud rate(s):
Point-To-Point, EIA 232 (Clause 10), baud rate(s):
Point-To-Point, modem, (Clause 10), baud rate(s):
LonTalk, (Clause 11), medium: _____
Other:

IntesisBox®BACnet Server –M-Bus User Manual r1.0 eng
URL
email
tel
http://www.intesisbox.com
[e-mail]
[phone]
© Intesis Software S.L.U. - All rights reserved
IntesisBox is a registered trademark of Intesis Software SLU
10/41
Device Address Binding:
Is static device binding supported? (This is currently necessary for two-way communication with
MS/TP slaves and certain other devices.) Yes No
Networking Options:
Router, Clause 6 - List all routing configurations, e.g., ARCNET-Ethernet, Ethernet-MS/TP, etc.
Annex H, BACnet Tunneling Router over IP
BACnet/IP Broadcast Management Device (BBMD)
Does the BBMD support registrations by Foreign Devices? Yes No
Character Sets Supported
Indicating support for multiple character sets does not imply that they can all be supported simultaneously.
ISO 10646 (UTF-8) IBM/MicrosoftDBCS ISO 8859-1
ISO 10646 (UCS-2) ISO 10646 (UCS-4) JIS X 0208
Gateway
If this product is a communication gateway, describe the types of non-BACnet equipment/network(s) that the gateway
supports:
M-Bus slave devices.

IntesisBox®BACnet Server –M-Bus User Manual r1.0 eng
URL
email
tel
http://www.intesisbox.com
[e-mail]
[phone]
© Intesis Software S.L.U. - All rights reserved
IntesisBox is a registered trademark of Intesis Software SLU
11/41
3 BACnet Interoperability Building Blocks Supported (BIBBs)
Data Sharing BIBBs
BIBB Type
Active
BACnet Service
Initiate
Execute
DS-RP-A
Data Sharing-ReadProperty–A
ReadProperty
DS-RP-B
Data Sharing-ReadProperty–B
ReadProperty
DS-RPM-A
Data Sharing-ReadPropertyMultiple–A
ReadPropertyMultiple
DS-RPM-B
Data Sharing-ReadPropertyMultiple–B
ReadPropertyMultiple
DS-RPC-A
Data Sharing-ReadPropertyConditiona–A
ReadPropertyConditional
DS-RPC-B
Data Sharing-ReadPropertyConditional–B
ReadPropertyConditional
DS-WP-A
Data Sharing-WriteProperty–A
WriteProperty
DS-WP-B
Data Sharing-WriteProperty–B
WriteProperty
DS-WPM-A
Data Sharing-WritePropertyMultiple–A
WritePropertyMultiple
DS-WPM-B
Data Sharing-WritePropertyMultiple–B
WritePropertyMultiple
DS-COV-A
Data Sharing-COV–A
SubscribeCOV
ConfirmedCOVNotification
UnconfirmedCOVNotification
DS-COV-B
Data Sharing-COV–B
SubscribeCOV
ConfirmedCOVNotification
UnconfirmedCOVNotification
DS-COVP-A
Data Sharing-COVP–A
SubscribeCOVProperty
ConfirmedCOVNotification
UnconfirmedCOVNotification
DS-COVP-B
Data Sharing-COVP–B
SubscribeCOVProperty
ConfirmedCOVNotification
UnconfirmedCOVNotification
DS-COVU-A
Data Sharing-COV-Unsubscribed–A
UnconfirmedCOVNotification
DS-COVU-B
Data Sharing-COV- Unsubscribed -B
UnconfirmedCOVNotification
Alarm and Event Management BIBBs
BIBB Type
Active
BACnet Service
Initiate
Execute
AE-N-A
Alarm and Event-Notification–A
ConfirmedEventNotification
UnconfirmedEventNotification
AE-N-I-B
Alarm and Event-Notification Internal–B
ConfirmedEventNotification
UnconfirmedEventNotification
AE-N-E-B
Alarm and Event-Notification External–B
ConfirmedEventNotification
UnconfirmedEventNotification
AE-ACK-A
Alarm and Event-ACK–A
AcknowledgeAlarm
AE-ACK-B
Alarm and Event-ACK–B
AcknowledgeAlarm
AE-ASUM-A
Alarm and Event-Alarm Summary–A
GetAlarmSummary
AE-ASUM-B
Alarm and Event-Alarm Summary–B
GetAlarmSummary
AE-ESUM-A
Alarm and Event-Enrollment Summary-A
GetEnrollmentSummary
AE-ESUM-B
Alarm and Event-Enrollment Summary-B
GetEnrollmentSummary
AE-INFO-A
Alarm and Event-Information–A
GetEventInformation
AE-INFO-B
Alarm and Event-Information–B
GetEventInformation
AE-LS-A
Alarm and Event-LifeSafety–A
LifeSafetyOperation
AE-LS-B
Alarm and Event-LifeSafety–B
LifeSafetyOperation

IntesisBox®BACnet Server –M-Bus User Manual r1.0 eng
URL
email
tel
http://www.intesisbox.com
[e-mail]
[phone]
© Intesis Software S.L.U. - All rights reserved
IntesisBox is a registered trademark of Intesis Software SLU
12/41
Scheduling BIBBs
Trending BIBBs
Network Management BIBBs
BIBB Type
Active
BACnet Service
Initiate
Execute
SCHED-A
Scheduling–A
(must support DS-RP-A and DS-WP-A)
SCHED-I-B
Scheduling-Internal–B
(shall support DS-RP-B and DS-WP-B)
(shall also support ether DM-TS-B or DS-UTC-B)
SCHED-E-B
Scheduling-External–B
(shall support SCHED-I-B and DS-WP-A)
BIBB Type
Active
BACnet Service
Initiate
Execute
T-VMT-A
Trending - Viewing and Modifying Trends–A
ReadRange
T-VMT-I-B
Trending - Viewing and Modifying Trends Inernal–B
ReadRange
T-VMT-E-B
Trending - Viewing and Modifying Trends External–B
ReadRange
T-ATR-A
Trending - Automated Trend Retrieval–A
ConfirmedEventNotification
ReadRange
T-ATR-B
Trending - Automated Trend Retrieval–B
ConfirmedEventNotification
ReadRange
BIBB Type
Active
BACnet Service
Initiate
Execute
NM-CE-A
Network Management - Connection
Establishment–A
Establish-Connection-To-
Network
Disconnect-Connection-To-
Network
NM-CE-B
Network Management - Connection
Establishment–B
Establish-Connection-To-
Network
Disconnect-Connection-To-
Network
NM-RC-A
Network Management - Router Configuration–A
Who-Is-Router-To-Network
I-Am-Router-To-Network
I-Could-Be-Router-To-
Network
Initialize-Routing-Table
Initialize-Routing-Table-Ack
NM-RC-B
Network Management - Router Configuration–B
Who-Is-Router-To-Network
I-Am-Router-To-Network
Initialize-Routing-Table
Initialize-Routing-Table-Ack

IntesisBox®BACnet Server –M-Bus User Manual r1.0 eng
URL
email
tel
http://www.intesisbox.com
[e-mail]
[phone]
© Intesis Software S.L.U. - All rights reserved
IntesisBox is a registered trademark of Intesis Software SLU
13/41
Device Management BIBBs
BIBB Type
Active
BACnet Service
Initiate
Execute
DM-DDB-A
Device Management - Dynamic Device Binding–A
Who-Is
I-Am
DM-DDB-B
Device Management - Dynamic Device Binding–B
Who-Is
I-Am
DM-DOB-A
Device Management - Dynamic Object Binding–A
Who-Has
I-Have
DM-DOB-B
Device Management - Dynamic Object Binding–B
Who-Has
I-Have
DM-DCC-A
Device Management - DeviceCommunicationControl–A
DeviceCommunicationControl
DM-DCC-B
Device Management - DeviceCommunicationControl–B
DeviceCommunicationControl
DM-PT-A
Device Management - PrivateTransfer–A
ConfirmedPrivateTransfer
UnconfirmedPrivateTransfer
DM-PT-B
Device Management - PrivateTransfer–B
ConfirmedPrivateTransfer
UnconfirmedPrivateTransfer
DM-TM-A
Device Management - Text Message–A
ConfirmedTextMessage
UnconfirmedTextMessage
DM-TM-B
Device Management - Text Message–B
ConfirmedTextMessage
UnconfirmedTextMessage
DM-TS-A
Device Management - TimeSynchronization–A
TimeSynchronization
DM-TS-B
Device Management - TimeSynchronization–B
TimeSynchronization
DM-UTC-A
Device Management - UTCTimeSynchronization–A
UTCTimeSynchronization
DM-UTC-B
Device Management - UTCTimeSynchronization–B
UTCTimeSynchronization
DM-RD-A
Device Management - ReinitializeDevice–A
ReinitializeDevice
DM-RD-B
Device Management - ReinitializeDevice–B
ReinitializeDevice
DM-BR-A
Device Management - Backup and Restore–A
AtomicReadFile
AtomicWriteFile
CreateObject
ReinitializeDevice
DM-BR-B
Device Management - Backup and Restore–B
AtomicReadFile
AtomicWriteFile
ReinitializeDevice
DM-R-A
Device Management - Restart–A
UnconfimedCOVNotification
DM-R-B
Device Management - Restart–B
UnconfimedCOVNotification
DM-LM-A
Device Management - List Manipulation–A
AddListElement
RemoveListElement
DM-LM-B
Device Management - List Manipulation–B
AddListElement
RemoveListElement
DM-OCD-A
Device Management - Object Creation and Deletion–A
CreateObject
DeleteObject
DM-OCD-B
Device Management - Object Creation and Deletion–B
CreateObject
DeleteObject
DM-VT-A
Device Management - Virtual Terminal–A
VT-Open
VT-Close
VT-Data
DM-VT-B
Device Management - Virtual Terminal–B
VT-Open
VT-Close
VT-Data

IntesisBox®BACnet Server –M-Bus User Manual r1.0 eng
URL
email
tel
http://www.intesisbox.com
[e-mail]
[phone]
© Intesis Software S.L.U. - All rights reserved
IntesisBox is a registered trademark of Intesis Software SLU
14/41
4 Service Types
Service type
Service name
Supported
Remarks
Alarm and Event
Services
AcknowledgeAlarm
ConfirmedCOVNotification
ConfirmedEventNotification
GetAlarmSummary
GetEnrollmentSummary
SubscribeCOV
File Access Services
AtomicReadFile
AtomicWriteFile
Object Access
Services
AddListElement
RemoveListElement
CreateObject
DeleteObject
ReadProperty
ReadPropertyConditional
ReadPropertyMultiple
ReadRange
WriteProperty
WritePropertyMultiple
Remote Device
Management
Services
DeviceComminicationControl
ConfirmedPrivateTransfer
ConfirmedTextMessage
ReinitializeDevice
Virtual Terminal
Services
VtOpen
VtClose
VtData
Security Services
Authenticate
RequestKey
Unconfirmed
Services
I-Am
I-Have
UnconfirmedCOVNotification
UnconfirmedEventNotification
UnconfirmedPrivateTransfer
UnconfirmedTextMessage
TimeSynchronization
UtcTimeSynchronization
Who-Has
Who-Is
LifeSafetyOperation
SubscribeCOVProperty
GetEventInformation

IntesisBox®BACnet Server –M-Bus User Manual r1.0 eng
URL
email
tel
http://www.intesisbox.com
[e-mail]
[phone]
© Intesis Software S.L.U. - All rights reserved
IntesisBox is a registered trademark of Intesis Software SLU
15/41
5 Objects
Supported Object Types
The objects supported are shown in the table below.
Object Type
ID
Supported
Management Point
Analog-Input
0
Analog-Output
1
Analog-Value
2
Averaging
18
Binary-Input
3
Binary-Output
4
Binary-Value
5
Calendar
6
Command
7
Device
8
Event-Enrollment
9
File
10
Group
11
Life-Safety-Point
21
Life-Safety-Zone
22
Loop
12
Multistate-Input
13
Multistate-Output
14
Multistate-Value
19
Notification-Class
15
Program
16
Schedule
17
Trend-Log
20
Trend-Log-Multiple
27

IntesisBox®BACnet Server –M-Bus User Manual r1.0 eng
URL
email
tel
http://www.intesisbox.com
[e-mail]
[phone]
© Intesis Software S.L.U. - All rights reserved
IntesisBox is a registered trademark of Intesis Software SLU
16/41
Objects and properties
5.2.1 IBOX-BAC-MEB (Device Object Type)
Property Identifier
Property Datatype
Value
ASHRAE
IBOX
Object_Identifier
BACnetObjectIdentifier
(Device, 246000)
R
R
Object_Name
CharacterString
"IBOX-BAC-MEB"
R
R
Object_Type
BACnetObjectType
DEVICE (8) (Device Object Type)
R
R
System_Status
BACnetDeviceStatus
OPERATIONAL (0)
R
R
Vendor_Name
CharacterString
"Intesis Software SLU"
R
R
Vendor_Identifier
Unsigned16
246
R
R
Model_Name
CharacterString
"IBOX-BAC-MEB "
R
R
Firmware_Revision
CharacterString
"1.0.0.0"
R
R
Application_Software_
Version
CharacterString
"1.0.0.0"
R
R
Location
CharacterString
""
O
-
Description
CharacterString
“M-Bus to BACnet Gateway"
O
-
Protocol_Version
Unsigned
1
R
R
Protocol_Revision
Unsigned
12
R
R
Protocol_Services_
Supported
BACnetServiceSupported
Refer to section 4 [Service Types]
R
R
Protocol_Object_Types_
Supported
BACnetObjectTypes
Supported
Refer to section 5.1 [Object Types]
R
R
Object_List
BACnetArray[N] of
BACnetObjectIdentifier
BACnetARRAY[N]
R
R
Structured_Object_List
BACnetArray[N] of
BACnetObjectIdentifier
-
O
-
Max_APDU_Length_
Accepted
Unsigned
480 when MSTP / 1476 when BACnet/IP
R
R
Segmentation_Supported
BACnetSegmentation
SEGMENTED-BOTH (0)
R
R
Max_Segments_accepted
Unsigned
16
O
R
VT_Classes_Supported
List of BACnetVTClass
-
O
-
Active_VT_Sessions
List of BACnetVTSession
-
O
-
Local_Date
Date
Current date
O
R
Local_Time
Time
Current time
O
R
UTC_Offset
INTEGER
-
O
-
Daylight_Savings_Status
BOOLEAN
-
O
-
APDU_Segment_Timeout
Unsigned
3000
R
R
APDU_Timeout
Unsigned
3000
R
R
Number_of_APDU_
Retries
Unsigned
3
R
R
List_Of_Session_Keys
List of
BACnetSessionKey
-
O
-

IntesisBox®BACnet Server –M-Bus User Manual r1.0 eng
URL
email
tel
http://www.intesisbox.com
[e-mail]
[phone]
© Intesis Software S.L.U. - All rights reserved
IntesisBox is a registered trademark of Intesis Software SLU
17/41
Time_Synchronization_
Recipients
List of BACnetRecipient
-
O
-
Max_Master * **
Unsigned
127
R
W
Max_Info_Frames *
Unsigned
1
O
R
Device_Address_Binding
List of
BACnetAddressBinding
NULL (empty)
R
R
Database_Revision
Unsigned
0
R
R
Configuration_Files
BACnetArray[N] of
BACnetObjectIdentifier
-
O
-
Last_Restore_Time
BACnetTimeStamp
-
O
-
Backup_Failure_Timeout
Unsigned16
-
O
-
Active_COV_
Subscriptions
List of
BACnetCOVSubscription
List of BACnetCOVSubscription
O
R
Slave_Proxy_Enable
BACnetArray[N] of
BOOLEAN
-
O
-
Manual_Slave_Address_
Binding
List of
BACnetAddressBinding
-
O
-
Auto_Slave_Discovery
BACnetArray[N] of
BOOLEAN
-
O
-
Slave_Address_Binding
BACnetAddressBinding
-
O
-
Last_Restart_Reason
BACnetRestartReason
-
O
-
Time_Of_Device_Restart
BACnetTimeStamp
-
O
-
Restart_Notification_
Recipients
List of BACnetRecipient
-
O
-
UTC_Time_
Synchronization_
Recipients
List of BACnetRecipient
-
O
-
Time_Synchronization_
Interval
Unsigned
-
O
-
Align_Intervals
BOOLEAN
-
O
-
Interval_Offset
Unsigned
-
O
-
Profile_Name
CharacterString
-
O
-
* Only available when MSTP is used
** Configurable through the configuration tool.

IntesisBox®BACnet Server –M-Bus User Manual r1.0 eng
URL
email
tel
http://www.intesisbox.com
[e-mail]
[phone]
© Intesis Software S.L.U. - All rights reserved
IntesisBox is a registered trademark of Intesis Software SLU
18/41
5.2.2 Analog Input Object Type
Property Identifier
Property Datatype
Value
ASHRAE
IBOX
Object_Identifier
BACnetObjectIdentifier
(Analog Input, 0)
R
R
Object_Name
CharacterString
Configurable through BACnet and Config Tool
R
R
Object_Type
BACnetObjectType
ANALOG_INPUT (0)
R
R
Present_Value
REAL
x
R
R
Description
CharacterString
-
O
-
Device_Type
CharacterString
-
O
-
Status_Flags
BACnetStatusFlags
{FALSE, FALSE/TRUE, FALSE, FALSE}
R
R
Event_State
BACnetEventState
STATE_NORMAL (0)
R
R
Reliability
BACnetReliability
NO_FAULT_DETECTED (0),
UNRELIABLE_OTHER (7)
O
R
Out_Of_Service
BOOLEAN
FALSE
R
R
Update_Interval
Unsigned
-
O
-
Units
BACnetEngineeringUnits
Configurable through BACnet and Config Tool
R
R
Min_Pres_Value
REAL
-
O
-
Max_Pres_Value
REAL
-
O
-
Resolution
REAL
-
O
-
COV_Increment
REAL
0
O
R
Time_Delay
Unsigned
-
O
R*
Notification_Class
Unsigned
-
O
R*
High_Limit
REAL
-
O
R*
Low_Limit
REAL
-
O
R*
Deadband
REAL
-
O
R*
Limit_Enable
BACnetLimitEnable
-
O
R*
Event_Enable
BACnetEventTransitionBits
-
O
R*
Acked_Transitions
BACnetEventTransitionBits
-
O
R*
Notify_Type
BACnetNotifyType
-
O
R*
Event_Time_Stamps
BACnetArray[N] of
BACnetTimeStamp
-
O
R*
Profile_Name
CharacterString
-
O
-
* Only available when specific object has a Notification Class configured

IntesisBox®BACnet Server –M-Bus User Manual r1.0 eng
URL
email
tel
http://www.intesisbox.com
[e-mail]
[phone]
© Intesis Software S.L.U. - All rights reserved
IntesisBox is a registered trademark of Intesis Software SLU
19/41
5.2.3 Analog Output Object Type
Property Identifier
Property Datatype
Value
ASHRAE
IBOX
Object_Identifier
BACnetObjectIdentifier
(Analog Output, 0)
R
R
Object_Name
CharacterString
Configurable through BACnet and Config Tool
R
R
Object_Type
BACnetObjectType
ANALOG_OUTPUT (1)
R
R
Present_Value
REAL
x
W
W
Description
CharacterString
-
O
-
Device_Type
CharacterString
-
O
-
Status_Flags
BACnetStatusFlags
{FALSE, FALSE, FALSE, FALSE}
R
R
Event_State
BACnetEventState
STATE_NORMAL (0)
R
R
Reliability
BACnetReliability
NO_FAULT_DETECTED (0)
O
R
Out_Of_Service
BOOLEAN
FALSE
R
R
Update_Interval
Unsigned
-
O
-
Units
BACnetEngineeringUnits
Configurable through BACnet and Config Tool
R
R
Min_Pres_Value
REAL
-
O
-
Max_Pres_Value
REAL
-
O
-
Resolution
REAL
-
O
-
COV_Increment
REAL
0
O
R
Priority_Array
BACnetPriorityArray
BACnetPriorityArray
R
R
Relinquish_Default
Unsigned
Configurable through BACnet and Config Tool
R
R
Time_Delay
Unsigned
-
O
R*
Notification_Class
Unsigned
-
O
R*
High_Limit
REAL
-
O
R*
Low_Limit
REAL
-
O
R*
Deadband
REAL
-
O
R*
Limit_Enable
BACnetLimitEnable
-
O
R*
Event_Enable
BACnetEventTransitionBits
-
O
R*
Acked_Transitions
BACnetEventTransitionBits
-
O
R*
Notify_Type
BACnetNotifyType
-
O
R*
Event_Time_Stamps
BACnetArray[N] of
BACnetTimeStamp
-
O
R*
Profile_Name
CharacterString
-
O
-
* Only available when specific object has a Notification Class configured

IntesisBox®BACnet Server –M-Bus User Manual r1.0 eng
URL
email
tel
http://www.intesisbox.com
[e-mail]
[phone]
© Intesis Software S.L.U. - All rights reserved
IntesisBox is a registered trademark of Intesis Software SLU
20/41
5.2.4 Analog Value Object Type
Property Identifier
Property Datatype
Value
ASHRAE
IBOX
Object_Identifier
BACnetObjectIdentifier
(Analog Value, 0)
R
R
Object_Name
CharacterString
Configurable through BACnet and Config Tool
R
R
Object_Type
BACnetObjectType
ANALOG_VALUE (2)
R
R
Present_Value
REAL
x
R
W
Description
CharacterString
-
O
-
Status_Flags
BACnetStatusFlags
{FALSE, FALSE, FALSE, FALSE}
R
R
Event_State
BACnetEventState
STATE_NORMAL (0)
R
R
Reliability
BACnetReliability
NO_FAULT_DETECTED (0)
O
R
Out_Of_Service
BOOLEAN
FALSE
R
R
Update_Interval
Unsigned
-
O
-
Units
BACnetEngineeringUnits
Configurable through BACnet and Config Tool
R
R
Min_Pres_Value
REAL
-
O
-
Max_Pres_Value
REAL
-
O
-
Resolution
REAL
-
O
-
COV_Increment
REAL
0
O
R
Time_Delay
Unsigned
-
O
R*
Notification_Class
Unsigned
-
O
R*
High_Limit
REAL
-
O
R*
Low_Limit
REAL
-
O
R*
Deadband
REAL
-
O
R*
Limit_Enable
BACnetLimitEnable
-
O
R*
Event_Enable
BACnetEventTransitionBits
-
O
R*
Acked_Transitions
BACnetEventTransitionBits
-
O
R*
Notify_Type
BACnetNotifyType
-
O
R*
Event_Time_Stamps
BACnetArray[N] of
BACnetTimeStamp
-
O
R*
Profile_Name
CharacterString
-
O
-
* Only available when specific object has a Notification Class configured