Intra Automation ITA-T1S Manual

THE EXPERT IN LEVEL AND FLOW
LEVEL
Magnetic Level Sensing
Transmitter
Type: ITA-T1S
Technical Information
02/2011

ITA-T1S Technical Information Intra-Automation
- 1 -
Intra-Automation
Technical Information
02/2011
Technical details subject to be changed
Please send your comments regarding this brochure to:
[email protected]

Intra-Automation GmbH Technical Information ITA-T1S
- 2 -
ITA-T1S
Magnetic Level Sensing
Transmitter
List of contents:
Chapt. Description Page
1 Characteristics
2 Functional Principle
3 Indicator
4 Interface Measurement
5 Techncal Data
6 Float Types
7 Transmitter
8 Order Code

ITA-T1S Technical Information Intra-Automation
- 3 -
1 Characteristics
Simple and rugged construction
Applicable for liquids with density 0,5 kg/dm³
Measuring length 300 up to 6000 mm (11,8 up to 236“)
Applicable for small storage reservoir
Pressure rating up to PN40 (300 lbs)
Temperature range up to 130 °C (166 °F)
Material of transmitter housing: Aluminium or stainless steel
Protection class: IP65 NEMA 4X)
Different sensor-tube materials available
Sensor tube available in Plastic material
Current output: 4…20 mA (optional: HART)
2 Functional Principle
The level sensing transmitter type ITA-T1S will be installed vertically
on the top of a tank. Different types of tank-connections are available
(see order code). The electrical connection between level sensor and
transmitter is done on factory side (3-wire).
A float follows directly the changes of liquid level and moves along
the guide tube. Inside the float a permanent magnet system is
installed. This magnetic field operates directly to the reed switches
inside the sensor tube. While the reed-switches are activated the
result will be a change in the resistance load which corresponds
directly to the level.
The transmitter (f.e. type INT5333 or TMT182) allocates to the actual
level a current output between 4 and 20 mA.
If required on customer side the movement of the float can be
reduced by using adjustable float stops.
3 Indicator
Measured values can be displayed directly on site by the optionally
available LCD digital 4 ½ digit indicator. The indicator is freely configurable
by means of a DIP-switch. Values in between 0 and 19999 can be
indicated. When supplied, the device has been configured to the clients’
requests. If no requests have been received, the configuration is 0-100 %.
For indication of the measured value the DigiFlow 520 can be connected
directly to the sensor type ITA-T1S. The DigiFlow 520 shows the actual
value in most of all engineering units (see fig. 3). Linearization of various
tank shapes can be done in the indicator. fig. 2 Digital indicator (at site)
Abb. 1 Schematische Darstellung
zur Anordnung der Reedkontakte
fig. 3 DigiFlow 520

Intra-Automation GmbH Technical Information ITA-T1S
- 4 -
4 Interface Measurement
The level measurement of liquids with different densities in one tank –
interface measurement- is a big problem for a lot of competitors. In this case
it is important to measure the level of two liquids in one tank (see fig. 4). This
function will be solved while using the ITA-T1S. Depending on the difference
of density the float will be designed to measure the interface.
5 Technical Data
Level sensing transmitter : ITA-T1S
Measuring range : 0,3…6 m
Resolution :
5, 10 or 20 mm
Ambient temperature
Aluminium electronic housing : -20…+40 °C (-4…+104 °F)
Stainless steel elec. housing : -20…+40 ° C (-4…+104 °F)
Pysical data of liquid
Temperature : -10…+100 °C (14…212 °F
Density : min. 0,5 kg/dm³
Pressure : max. PN40 (300 lbs)
Prot. class DIN 40050 / IEC 144 : IP65 (NEMA 4X)
Cables :
Cable glands
Aluminium housing : M20x1,5 (optional ½“ NPT)
Stainless steel housing : M20x1,5 (optional ½“ NPT)
EExd-housing : ½“ NPT-F
Current output : 4..20 mA (optional HART)
Threaded tank connection : R ½“ or ½“ NPT-M
Flanged tank connection : DN50, DN100 / PN16 & PN50 or 2“, 4“ / 150 & 300 lbs RF
Materials
Transmitter housing : Aluminium
Special housing : Stainless steel
EExd-housing : Aluminium/epoxy coated
Housing for digital LCD-indicator : Aluminium
Flange : CS, SS (Option ECTFE-coating) PP, PVC, PVDF
Thread : SS
Sensor tube : CS, SS (Option ECTFE-coating) PP, PVC, PVDF
Float : See „Float Types“
fig. 4 Typical Application

ITA-T1S Technical Information Intra-Automation
- 5 -
Optional Digital Indicator
Display : 4 ½ digits
Power supply : 2,9 VDC (Two-wire-version)
Current input : +3,8…+20,4 mA
Load : 190 
Counter-Resolution : 19,999
Frequency : 2,5 readings per second
Precision : 0,01 % (of span) + 2 counts
Temperature drift : max. 0,6 counts/°C
Operational temperature : 0…+50°C
Rel. humidity : max. 95 %
6 Float types
Type
1) Form Dimensions [mm] Material Min. Density
[kg/dm³]
Max. Op.
Pressure
[bar @ 20°C]
Max. Medium
temperatur
[°C]
A Spherical 52 1.4571
316Ti 0,7 40 -40…+100
B Spherical 80 3.7035
Titanium 0,6 17 -40…+100
C Cylinder 80 x 35 1.4571
316Ti 0,5 13 -40…+100
D Cylinder 44 x 52 1.4571
316Ti 0,8 25 -40…+100
E Cylinder
50 x 120 PVC 0,55 10 0…+60
F Cylinder 50 x 120 PP 0,5 10 0…+60
Y Spherical 65 Hastelloy 0,7 6 -40…+100
1) other types on request
Type: A, B und Y Type C Type D Type E Type F
7 Transmitter
Type Current output
[mA]
Power
supply
[VDC]
Min/Max-values
current output
[mA]
Operating
temperature
[°C (°F)]
Min. and max.
resistance
[] Approval
T1 4…20 8…35 4…20 -20…+85
(-4…[phone] ---
T2 4…20 8…28 4…20 -20…+85
(-4…[phone] Ex II 1 G EEx ia IIC T1…T6
T3 4…20 10..30 4…20 -40…+85
(-40…+185) 0…400 0…2000 Ex II 1 G EEx ia IIC T4…T6
T4 4…20
Hart 13…30 3,8 oder 22 (selectable)
-40 (-40)…
+85 (+185)
+70 (+158)
+55 (+131)
0…400
0…4000 Ex II 1 G EEx ia IIC T4…T6

Intra-Automation GmbH Technical Information ITA-T1S
- 6 -
8 Order Code
Code Description
ITA-T1S Continous Level Sensing Element for vertical tank-mounting
Material Guide tube / Measuring length in mm
Material Resolution
S10-L____mm 316SS 10 mm
S05-L____mm 316SS 5 mm
S20-L____mm 316SS 20 mm
T10-L____mm Titanium 10 mm
T05-L____mm Titanium 5 mm
T20-L____mm Titanium 20 mm
P10-L____mm PP 10 mm
P05-L____mm PP 5 mm
P20-L____mm PP 20 mm
V10-L____mm PVC 10 mm
V05-L____mm PVC 5 mm
V20-L____mm PVC 20 mm
H10-L____mm Hastelloy 10 mm
H05-L____mm Hastelloy 5 mm
H20-L____mm Hastelloy 20 mm
Tank connection
Material Type Dimensions
CR01 CS Nipple R ½“
CN01 CS Nipple ½“ NPT
CF11 CS Blind flange DN50 PN16
CF12 CS Blind flange DN100 PN16
CF21 CS Blind flange 2“150# RF
CF22 CS Blind flange 4“ 150# RF
SR01 316SS Nipple R ½“
SN01 316SS Nipple ½“ NPT
SF11 316SS Blind flange DN50 PN16
SF12 316SS Blind flange DN100 PN16
SF21 316SS Blind flange 2“150# RF
SF22 316SS Blind flange 4“ 150# RF
TF11 Titanium Blind flange DN50 PN16
TF12 Titanium Blind flange DN100 PN16
TF21 Titanium Blind flange 2“150# RF
TF22 Titanium Blind flange 4“ 150# RF
PF11 PP Blind flange DN50 PN16
PF12 PP Blind flange DN100 PN16
PF21 PP Blind flange 2“150# RF
PF22 PP Blind flange 4“ 150# RF
VF11 PVC Blind flange DN50 PN16
VF12 PVC Blind flange DN100 PN16
VF21 PVC Blind flange 2“150# RF
VF22 PVC Blind flange 4“ 150# RF
HF11 316SS/Hastelloy-plated Blind flange DN50 PN16
HF12 316SS/Hastelloy-plated Blind flange DN100 PN16
HF21 316SS/Hastelloy-plated Blind flange 2“150# RF
HF22 316SS/Hastelloy-plated Blind flange 4“ 150# RF
9999 others, please specify
(continued on page 7)

ITA-T1S Technical Information Intra-Automation
- 7 -
(Continuation)
Float
Dimension
[mm] min. Density [kg/dm³] max. Pressure [bar] Material
A 52 0,70 40 316SS
B 80 0,60 17 Titanium
C 80x35 0,50 13 316SS
D 44x52 0,80 25 316SS
E 50x120 0,50 10 PVC
F 50x120 0,55 10 PP
G 65 0,70 6 Hastelloy
Electronic housing
A Standard, IP65, material: die-cast Aluminium, painted
I** Incl. digital display, IP66, housing material: die-cast Aluminium
S Standard, IP65, material: 316SS
E Flame proof, IP66, material: die-cast Aluminium / epoxy coated
9 others, please specify
Head transmitter
M10 Transmitter type: INT5333A
M11 Transmitter type: INT5333A with Exd housing
M12 Transmitter type: INT5333A with stainless steel housing
M20 Transmitter type: INT5333B intrinsically safe
M22 Transmitter type: INT5333B intrinsically safe with stainless steel housing
M30 Transmitter type: INT5335A SMART/HART technology
M31 Transmitter type: INT5335D Ex proof with SMART/HART technology
M32 Transmitter type: INT5335D Ex proof with SMART/HART technology and with
stainless steel housing
M40 Transmitter type: INT5350A Profibus PA/FOUNDATION Fieldbus technology
M41 Transmitter type: INT5350A Ex proof with Profibus PA/FOUNDATION Fieldbus
technology
M42 Transmitter type: INT5350A Ex proof with Profibus PA/FOUNDATION Fieldbus
technology and with stainless steel housing
99 others
ATEX-approval
00 without
Ex* II 1/2G EEx d IIC T4…T6 / EEx ia IIC T4…T6
*only in combination with electronic housing type „E“ and transmitter type „T2“ to „T4“.
** ATEX-approval EEx d for digital display in preparation!
Order code:
ITA-T1S- -L____mm- - - - -

Intra-Automation GmbH Technical Information ITA-T1S
- 8 -
Besides the products covered by this brochure, Intra-Automation GmbH also manufactures other high-
quality and high precision instruments for industrial measurement tasks. For more information, please
contact us (contact details on the backside of this brochure).
Flow measurement
Itabar®-Flow Sensor IntraSonic IS210 Ultrasonic Flow Meter
Level measurement
ITA-mag. Level Gauge MAGLINK Level Indicator
Other Measurement Tasks:
DigiFlow Flow and Level Computers IntraCon Digital Controllers IntraDigit Digital Indicators / Meters

ITA-T1S Technical Information Intra-Automation
- 9 -
International Headquarters: Sales Office for the BENELUX:
Intra-Automation GmbH B.V. Intra-Automation HTP
Otto-Hahn-Str. 20 PO Box 10
41515 Grevenbroich 4730 AA Oudenbosch
GERMANY THE NETHERLANDS
+49 – (0) 21 81 / 7 56 65-0 +31 – (0)165 – 32 22 01
+49 – (0) 21 81 / 6 44 92 +31 – (0)165 – 32 29 70
[email protected] [email protected]
www.intra-automation.com