INTU Evolution X3 User manual

1
User Manual
PERFORMANCE ON DEMAND
X3

2
Dear Customer,
Thank you for purchasing our air purier. In order to facilitate the installation and use of
this machine, we recommend that you carefully read this manual, and keep it stored safely.
To ensure that you always enjoy fresh air, use this manual for qualied and standardized
installation, proper use, and maintenance. This will ensure you always enjoy fresh air.
If any questions arise from use, please consult this manual. If it is in accordance with the
warranty, we kindly welcome you to contact us with the address and phone number on the
card. We welcome any comments or suggestions you have about our product and service.

3
Contents
Performance Index ......................................................................................................................... 04
Product Features .............................................................................................................................05
Product Appearance and Structure .............................................................................................. 06
Installing the Filter ............................................................................................................................07
Filter / Dust Sensor Maintenance ................................................................................................... 08
Function Description ....................................................................................................................... 09
Precautions .......................................................................................................................................10
Prohibited ...........................................................................................................................................11
Mandatory ......................................................................................................................................... 12
Packaged Items ................................................................................................................................ 13
WIFI .................................................................................................................................................... 14
Troubleshooting ...............................................................................................................................16

4
Product Name Air Purier
Rated Voltage 220V-240V~
Rated Frequency 50Hz/60Hz
Rated Power 43W
Particulates (CADR) 200m3/h
Particulates CCM P1
Energy Eciency Index Qualied (Particulates)
Noise 57dB(A)
Applicable area 14-24 m2
Product size 325x172x510mm
Weight 5kg
Product Usage Removes pollutants such as particulate
matter, gas pollutants and microorganisms in
the air.
Method of Cleaning 1.Washable pre-lter
2.Composite activated carbon lter
+ HEPA lter
Performance Index

5
Pre-lter
The primary lter is the primary lter of the air purier. It is mainly used to lter dust particles
above 5 microns, including large particles of dust, dander, pollen, oating matter and other
pollutants. Can be cleaned and reused multiple times.
HEPA+ activated carbon composite lter
The activated carbon lter is based on the standard of lter material for household purier
ltration. The loose polymer material is used as the carrier, and the high-eciency catalyst is
attached to the surface of the activated carbon to make the adsorption capacity strong, the
wind resistance is small, and the lter function is good. With high-quality powdered activated
carbon as adsorbent material, it has good adsorption and dust collecting eect, good
formability, high strength and low airow resistance. Activated carbon can absorb harmful
gases such as benzene, toluene, xylene, formaldehyde and ammonia, harmful gas with good
adsorption function .
The HEPA lter lters 0.3 micron particles of bacteria, smoke and dust in the air, and the
ltration eciency is over 99%. Combined with a multi-purpose lter, the HEPA lter lters out
tiny particles larger than 20 nanometers in diameter.
Product Features

6
Product Appearance
and Structure
Sensor
Air Inlet
Air outlet
Operation Panel
Handles
(on both sides)
Surface cover

7
Installing the Filter
Note: Make sure to remove the plastic bag from the
lter before use.
1. Press the “PUSH” on both sides of the air inlet
and open.
2. Remove the lter.
3. Remove the lter from the plastic bag.
Note: There are internal and external points, the one with the pull tab facing out; be sure to
install the front panel before use.

8
Filter / Dust Sensor Maintenance
Pre-lter (about half a month)
Use a vacuum cleaner to remove dust from the surface of the lter,
or wash it with water and dry it thoroughly.
HEPA+ activated carbon composite lter
(about once every two months)
When the 1500 hour lter replacement prompt ashes, press and
hold the reset button to clear the lter indicator light and reset the
timing function.
Place the lter in a ventilated place so that the harmful gases
and bacteria on the surface of the lter can be volatilized. Do not
expose it to excessive sunlight.
Do not wash the lter with water.
Tips
• Unplug the power plug before cleaning and maintenance;
• Do not operate with the lter removed (no dust removal eect, and the dust that is
inhaled may cause equipment failure);
• Unplug the power cord when it is idle for a long time (it will also consume power in the
standby state);
• Depending on the place of use and the method of use (for example, households with a
large number of smokers or areas with severe air pollution), the lter replacement cycle
may be shortened. If the ltration eect is not obvious, replace the lter in time.
When replacing the lter, please turn o the power rst.

9
Function Description
After the power is turned on, the air quality indicator light is completely
red, the machine enters the automatic mode.
After plugging in the power, you will hear a sound “Di”, the machine
enters standby mode, and the air quality indicator will shows red color.
Power
Timer
Speed
Child Lock
Reset
Power O
Powering On
The machine’s working time can be set by the timer button while the
machine is running. Set the time to 1 hour, 2 hours, 4 hours, 8 hours,
press again to turn o, the corresponding indicator lights after the
selected time.
Press the wind speed button to change the speed of the motor. It is
divided into rst gear, second gear, third gear, sleep, AUTO. When
pressed, the machine increases one gear from the current gear position,
and then returns to the automatic mode.
In AUTO mode, PM2.5 corresponds to the corresponding table of air
quality and gear position in the intelligent mode of speed:
1~100 = green light = excellent air quality = rst gear
101~200 = yellow light = good air quality = second gear
201~500 = red light = poor air quality = third gear
When the child lock button is pressed, the button function of the
machine enters the locked state, and all the buttons cannot be operated.
Long Press this button for 3 seconds to unlock.
This unit is equipped with a timing change lter function, which will ash
until the 1500 hour lter replacement prompt. Press and hold the reset
button for 5 seconds to clear the lter indicator and reset the timing
function.
When the power is on, touch the “Power” button on the operation, and
the machine enters the standby state. (The icon light is on when the
machine enters the standby state.)

10
During Installation
1. Do not place in the following places:
• Direct sunlight or facing the air outlet and heated places (may
cause deformation,Deterioration, discoloration, and failure).
• Equipment accessories such as TVs and radios (which may
cause image distortion and noise). Please place it at a
distance of 1m or more. At the same time, if the same socket
is used with these devices, image plugging and noise may
occur when the power plug is inserted. When this happens,
plug the power cord into a dierent outlet.
2. For indoor dust such as pollen, the product should be placed on
the ground.Since pollen, dust, etc. are likely to fall near the oor,
it is recommended to place the product on a at oor in the
room.
3. In order to eectively circulate the air in the room. In order not
to block the air inlet and outlet, place the product about 30cm or
more from the left and right sides of the wall, furniture, curtains,
etc. In order to use this product more eectively, please keep the
back of the product at least 20cm away from the wall.
4. Do not place objects on the main unit (otherwise it may cause the
machine to malfunction). Special Note: Do not place magnets and
metal objects.
5. Do not block the air inlet and outlet, for example, do not place
objects on the air outlet.Or in front of the air inlet.
Precautions
Sun
1m
goods
outlet
inlet

11
1. The machine is prohibited from moving or shaking while it is
running. Do not pull on the power cord while moving or storing it.
Pulling the power cord may cause a short circuit or damage to the
inside of the power cord, resulting in re or electric shock.
2. Do not damage the power cord or plug, and do not cut,
excessively twist, pull, or twist the power cord. If the power cord
is damaged, it must be replaced by the manufacturer, service
department or professional to avoid danger. Non-professionals
are prohibited from disassembling the machine to avoid the risk
of electric shock.
3. The plug and hand should not be exposed to water before
plugging in the power plug, otherwise there is a danger of electric
shock.
4. Do not use power supplies, universal sockets or connected
devices that exceed the rated value.220V ~ 5A AC power. Using
a universal outlet that exceeds the rated value or connecting the
power supply may cause the power cord to overheat and cause a
re.
5. Do not touch the power plug with wet hands, which may result in
electric shock.
6. Do not put your ngers or metal objects into the gap of the air
outlet, otherwise it may cause electric shock or injury. Do not
allow water, ammable detergents or other liquids to enter the
product to avoid electric shock or re.
7. This product is not a substitute for normal ventilation equipment,
daily vacuum cleaners and range hoods used in the kitchen.
8. Do not use this product in gas appliances, heating devices or
stove accessories.
9. Do not use this product in a wet or hot environment such as a
bathroom, toilet or kitchen.
10. Never place products in such locations
• Unstable locations (otherwise the product may fall or fall
over, resulting in injury, electric leakage, electric shock or
re.)
• Locations that are hot, humid, or wet, such as bathrooms
(air puriers may cause electric shock or re due to electric
leakage.) a place where the kitchen emits soot
11. Do not use air puriers in indoors with incense-based insecticides.
• Chemical residues may accumulate in the machine and then
be released from the air outlet to endanger your health.
• After using the insecticide, allow the room to be thoroughly
ventilated before using the air purier.
Prohibited
220V~
5A

12
12. It is not recommended to use an air purier when burning incense
or mosquito coils, otherwise the lter of the air purier will leave
an odor.
1. Turn o the power of the machine immediately when any of the following conditions
occur (may cause electric shock, sparks or smoke)
• There is abnormal sound or vibration during operation
• The product is abnormally hot and has a burnt odor
2. Please clean the power plug regularly
• If the power plug is dusty, moisture may damage the insulated part of the plug,
resulting in a re.
• If the appliance is not used for a long time, please unplug the power cord.
3. Be sure to disconnect the power before performing maintenance on the appliance. The
product may suddenly start, causing electric shock and injury.
4. Plug the plug securely into the power outlet (if the plug is not securely inserted, it may
cause electric shock due to overheating or even cause a re.)
• Do not use a damaged plug or a loose power outlet.
5. Please pull the power plug from the insulated part of the hand-held plug.
• Pull the power cord to pull o the power plug, which may cause damage to the
power cord, electric shock, short circuit, or re.
6. When any of the following conditions occur, please turn o the power of the machine
immediately and look for the maintenance department.
• The switch does not work.
• The power cord or plug is abnormally hot.
• I noticed an abnormal sound or vibration
• There are any other abnormalities or malfunctions
7. Non-professionals are prohibited from disassembling the machine to
avoid the risk of electric shock
Mandatory

13
Body 1PC
Main lter 1 Set
Primary lter 1PC
Product Manual 1PC
Move Control 1PC
Packaged Items

14
1. Download Smart Life App from app store
2. Log in the app after registration
The air purier and the phone need to be connecting with the same WIFI.
WiFi network needs to be 2.4ghz. Will work on most 2.4ghz networks and most
smart phones.
3. Turn on air purier and locate the WiFi or ionizer button (dependant on model)
4. Turn o (put in stand-by) the air purier.
5. With the machine in standby hold where the WiFi or ionizer button was until the WiFi
symbol ashes. (EZ Mode)
WiFi

15
6. On the app click add device or the
+ symbol
a. Choose small home device then air
purier (WiFi)
b. Input WiFi name and password c. Device will be added. (2 minute
cycle)
d. Click Done when complete.
7. When complete press power button
to remotely turn on/o the air
purier.
Press air purier picture to control
functions.

16
Malfunction Inspect / How to x
Can’t turn on or press button no
response
1. Is the power cord plug plugged in?
Plug in the power cord.
2. Is the front cover of the purier covered?
Cover the front cover of the purier.
Button no response 1. Is the lter dirty?
Clean the lter.
2. Is the lter not replaced for a long time?
Replace the lter with a new one.
The smell of the air outlet makes
people feel uncomfortable
1. Is the plastic bag on the lter screen
removed by the purier?
Remove the plastic bag from the lter
before using it for the rst time.
2. Is the order of the purier lter
incorrectly installed?
Please refer to the instructions for the
installation sequence and precautions.
The purier runs for a long
time but the air quality is not
signicantly improved
The lter alarm light is on: it indicates that the
lter timing change timer has reached the set
value. At this time, after changing the lter
screen, press and hold the sleep to reset.
Troubleshooting
Common malfunctions, error code description, and troubleshooting method.

17

18
CUSTOMER CARE
UK Freephone: 01772 923 849
Email: [email protected]