Invensify Invensor User manual

Quick Start Guide
Install the Invensor App and click on
Create Account. Enter your
information and click done, the
Invensor App will automatically begin
scanning for any available Invensor
units. Make sure that Bluetooth is
enabled on your device and the
Invensor unit is within range.
1Once connected, the Invensor App
will prompt you to enter information
associated with the Invensor unit
you connected to.
Once complete, this process will
repeat for each Invensor unit you
are attempting to connect to your
device.
Your device is now set up to track and
manage your medication, blood
glucose, reminders, alerts, and peace
of mind.
Manage your medication.
Worry less. Live Life.
• Where will this
Invensor be placed?
• Add medicines and
set temp range for each.
• Set Blood Glucose
range.
• Add Caregiver
2
3
Scanning
Set up
Create Account

Quick Start
Guide
[phone]
www.invensify.com
FCC
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna. Increase the
separation between the equipment and receiver. Connect the
equipment into an outlet on a circuit different from that to
which the receiver is connected. Consult the dealer or an
experienced radio/TV technician for help.
ISEDC
User Manual Notice for License-Exempt Radio Apparatus
(RSS-Gen, Issue 4, Nov. 2014, Section 8.4)
This device complies with Industry Canada license-exempt
RSS standard(s). Operation is subject to the following two
condistions:
1. This device may not cause harmful interference;
2. This device must accept any interference received,
including interference that may cause undesired operation of
the device.
Cet appareil est conforme á Industrie Canada une licence
standard RSS exonérés (s). Son fonctionnement est soumis
aux deux conditions suivantes:
1. Cet appareil ne doit pas provoquer d’interférences;
2. Cet appareil doit accepter toute interférence reçue, y
compris les interférences pouvant provoquer un
fonctionnement indésirable de l’appareil.
Download
the app
Before you use your Invensor you need to install
the app and sync your device via Bluetooth.
Please refer to the steps in the Quick Start Guide
for more info. You can download the free App on
the App Store or Google Play. Simply search for
“Invensor” or click the associated links at
www.invensify.com.
Manage your medication.
Worry less. Live life.