Stryker Medical 919 User manual

IMPORTANT
File in your
maintenance
records
919 Transport Stretcher
OPERATIONS AND MAINTENANCE MANUAL
For Parts or Technical Assistance:
1–800–327–0770

Table Of Contents
Stretcher Operation 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preventative Maintenance Checklist 3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cleaning 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Assembly Drawings and Replacement Parts Lists
Final Assembly 6, 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Base Assembly 8, 9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Base Hood Assembly 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Litter Frame Assembly 11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Litter Assembly 12, 13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fowler Assembly 14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Siderail and Bumper Assembly, Left 15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Siderail and Bumper Assembly, Right 16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Left Siderail Assembly 17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Right Siderail Assembly 18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Removable I.V. Holder Assembly 19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Permanent Folding I.V. Holder Assembly 20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warranty
Obtaining Parts and Service 21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Supplemental Warranty Coverage 21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Return Authorization 22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Freight Damage Claims 22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Stretcher Operation
2
Trendelenburg
1. Press the latch with the Trendelenburg symbol on it and
push down on the control end of the litter at the same time.
Release the latch to secure when the desired position is
reached.
2. Press the latch with the Trendelenburg symbol on it and
pull up on the control end of the litter to raise it.
NOTE: The pressure it takes to raise or lower the litter will
vary depending on the weight of the patient. If the patient
is very heavy, you may not have to press on the litter to low-
er it. If the patient is very light, you may not have to pull on
the litter to raise it.
Foot Pedal
1. Push the pedal DOWN to engage the four wheel brakes.
2. Place the pedal in the MIDDLE position to free all four
wheels. This enables the stretcher to be pushed sideways.
3. Lift the pedal to the full UP position to engage the direc-
tional wheel lock. This allows steering from the control end
of the stretcher.
Manual Fowler
1. Raise the Fowler to the desired height (0 to 90_) by
grasping the handles on the Fowler and lifting.
2. Lower the Fowler by grasping the handles and releasing
the Fowler stand from the bracket on the litter.
WARNING: DO NOT lower the Fowler by reaching un-
der it.
Folddown Siderail
1. Raise the siderails to their full height by pulling them up.
2. Lift the latch under the siderails to push the siderails
down.
Trendelenburg Symbol
Foot Pedal

Service Information
3
PREVENTATIVE MAINTENANCE CHECKLIST
Tighten all fasteners regularly.
Check roll pins for proper positioning.
Check collars or sleeves for proper positioning. Tighten, if necessary.
Check lubrication of cranks, pivots, and casters.
Check brake rack gear bearing for wear. Replace, if necessary.
Serial No.______________
______________
______________
______________
______________
Completed By:_________________________________ Date:_____________

Service Information
4
Hand wash all surfaces of the stretcher with warm water and mild detergent. Dry thoroughly. DO NOT
STEAM CLEAN, PRESSURE WASH, HOSE OFF OR ULTRASONICALLY CLEAN. Using these methods
of cleaning is not recommended and may void this product’s warranty.
Clean Velcro AFTER EACH USE. Saturate Velcro with disinfectant and allow disinfectant to evaporate. (Ap-
propriate disinfectant for nylon Velcro should be determined by the hospital.)
In general, when used in those concentrations recommended by the manufacturer, either phenolic type or
quaternary type disinfectants can be used. Iodophor type disinfectants are not recommended for use be-
cause staining may result. The following products have been tested and have been found not to have a harm-
ful effect on fabrics WHEN USED IN ACCORDANCE WITH MANUFACTURERS RECOMMENDED DILU-
TION.*
TRADE NAME DISINFECTANT
TYPE MANUFACTURER *MANUFACTURER’S
RECOMMENDED
DILUTION
A33 Quaternary Airwick (Professional Products Division) 2 ounces/gallon
A33 (dry) Quaternary Airwick (Professional Products Division) 1/2 ounce/gallon
Beaucoup Phenolic Huntington Laboratories 1 ounce/gallon
Blue Chip Quaternary S.C. Johnson 2 ounces/gallon
Elimstaph Quaternary Walter G. Legge 1 ounce/gallon
Franklin
Phenomysan F2500 Phenolic Purex Corporation 1 1/4 ounce/gallon
Franklin Sentinel Quaternary Purex Corporation 2 ounces/gallon
Galahad Phenolic Puritan Churchill Chemical Company 1 ounce/gallon
Hi–Tor Quaternary Huntington Laboratories 1/2 ounce/gallon
LPH Phenolic Vestal Laboratories 1/2 ounce/gallon
Matar Phenolic Huntington Laboratories 1/2 ounce/gallon
Omega Quaternary Airwick (Professional Products Division) 1/2 ounce/gallon
Quanto Quaternary Huntington Laboratories 1 ounce/gallon
Sanikleen Quaternary West Chemical Products 2 ounces/ gallon
Sanimaster II Quaternary Service Master 1 ounce/gallon
Vesphene Phenolic Vestal Laboratories 1 1/4 ounce/ gallon
Quaternary Germicidal Disinfectants, used as directed, and/or Chlorine Bleach products, typically 5.25% So-
dium Hypochlorite in dilutions ranging between 1 part bleach to 100 parts water, and 2 parts bleach
to 100 parts water are not considered mild detergents. These products are corrosive in nature and
may cause damage to your stretcher if used improperly. If these types of products are used to clean
Stryker patient handling equipment, measures must be taken to insure the stretchers are rinsed with clean
water and thoroughly dried following cleaning. Failure to properly rinse and dry the stretchers will leave a cor-
rosive residue on the surface of the stretcher, possibly causing premature corrosion of critical components.
NOTE
Failure to follow the above directions when using these types of cleaners may void this product’s warranty.
REMOVAL OF IODINE COMPOUNDS
This solution may be used to remove iodine stains from mattress cover and foam footrest pad surfaces.
1. Use a solution of 1–2 tablespoons Sodium Thiosulfate in a pint of warm water to clean the stained area.
Clean as soon as possible after staining occurs. If stains are not immediately removed, allow solution to
soak or stand on the surface.
2. Rinse surfaces which have been exposed to the solution in clear water before returning bed to service.

Notes
5

6
Final Assembly
Assembly part number 919–1–10 (reference only)

7
Final Assembly
Item Part No. Part Name Qty.
A (page 8 & 9) Base Assembly 1
B (page 12 & 13) Litter Assembly 1
C23–25 Self–Tapping Screw 4
E8–34 Shoulder Bolt 1
H11–13 Flat Washer 2
J16–12 Flex Lock Nut 1
K3–31 Hex Hd. Cap Screw 1
L52–16 Spacer 2
M 946–35–25 Liner 2
N16–12 Flexlock Nut 1
P28–76 Retention Ring 1
R 919–1–67 Cylinder Cam Rod Ass’y1
S38–162 Compression Spring 1
T 919–1–62 Head Down Label 1
W25–69 Pop Rivet 1
Y11–64 Flat Washer 2
AC 11–2 Flat Washer 1
AD 919–1–70 Cam 1
AE 946–35–24 Yoke 1
AF 1010–31–77 Gas Cylinder 1
AH 26–63 Groove Pin 2
AJ 26–137 Groove Pin 1
AK 12–7 Lock Washer 1
AL 21–119 Set Screw 1
Litter Attachment Retrofit Kit p/n 919–20–130. (For upgrading loose litter tops).

8
Base Assembly
Assembly part number 919–20–10
(reference only)

9
Base Assembly
Item Part No. Part Name Qty.
A 919–20–16 Base Weldment 1
B 919–1–156 Caster (Non–Steering) 2
C 919–1–155 Caster (Steering) 2
D 919–30–31 Spur Gear 2
E42–1 Collar 3
H 988–1–236 Connecting Lever 1
J 919–30–28 Rack Bearing 2
K 919–30–25 Rack Assembly 1
L4–32 Soc. Hd. Cap Screw 2
M 946–1–117 Brake Rod Bushing 4
N 390–6–1 Oxygen Bottle Holder 1
P 919–30–30 Brake Actuator 1
R 919–30–20 Brake Pedal 1
S (page 10) Base Hood Assembly 1
T 919–30–22 Brake Arm 2
Y7–17 Ph. Truss Hd. Mach. Screw 4
Z15–22 Hex Nut 4
AA 12–20 Split Ring Lock Washer 4
AB 16–11 Hex Nut 1
AC 14–3 Flat Washer 3
AD 3–12 Hex Hd. Cap Screw 4
AE 15–13 Hex Jam Nut 4
AF 14–2 Nylon Flat Washer 9
AJ 16–16 Hex Nut 4
AK 3–5 Hex Hd. Cap Screw 3
AL 4–51 Soc. Hd. Cap Screw 1
AM 3–17 Hex Hd. Cap Screw 1
AN 11–2 Flat Washer 2
AP 919–1–48 Bellows 2
AR 29–11 Dual Lock 4
BB 37–34 Hole Plug 1

10
Base Hood Assembly
Assembly part number 919–1–41 (reference only)
Item Part No. Part Name Qty.
A 919–1–60 Stretcher Logo Label 1
B 919–1–61 Specification Label 1
C 919–1–63 Brake Operation Label 1
D 919–1–64 Stripe 3
E 946–1–60 Stryker Logo Label 3
F 919–1–40 Hood 1
H 919–1–108 I.V. Clip 2
J 946–1–109 Adhesive Pad 2
K4–57 Hex Soc. But. Hd. Cap Screw 2
L16–27 Kep Nut 2
M11–16 Flat Washer 2
N 921–1–252 Serial Number Label 1

11
Litter Frame Assembly
Assembly part number 919–1–15 (reference only)
Item Part No. Part Name Qty.
A 946–1–37 Corner, Head End, Left 2
B 946–1–38 Corner, Head End, Right 2
C 919–1–29 Release Lever 1
D 919–1–43 Side Tube, Left 1
E 919–1–42 Side Tube, Right 1
F 926–1–26 Cross Tube 1
H 919–1–23 Head End Cross Tube 1
J 919–1–30 Handle Pivot 2
K 919–1–27 Left Handle 1
L 919–1–28 Right Handle 1
M 919–1–19 Support Angle, Left 1
N16–36 Fiberlock Nut 12
P25–50 Pop Rivet 10
R4–54 Hex But. Hd. Cap Screw 20
S 919–1–20 Support Angle, Right 1
T 919–1–37 Threaded Shaft 1
W17–4 Acorn Nut 2
Y14–2 Nylon Washer 2
Z30–21 Rubber Cap 4
AA 14–4 Nylon Washer 2
AB 919–1–44 Rubber Bumper 1
AC 919–1–45 Adhesive Pad 1

12
Litter Assembly
Assembly part number 919–32
(reference only)

13
Litter Assembly
Item Part No. Part Name Qty.
A (page 11) Litter Frame Assembly 1
B (page 14) Fowler Assembly 1
C 919–32–12 Fowler Bracket 2
D 946–34–41 Skin Support Angle, Left 1
E 946–34–42 Skin Support Angle, Right 1
F 946–34–40 Skin Support Angle, End 1
H 926–34–31 Footsection Skin 1
J 966–34–40 Pivot Sleeve 2
K 919–32–18 Bracket Assembly 1
L 966–34–41 Pivot 2
M11–134 Spacer 10
N25–69 Pop Rivet 10
P25–55 Pop Rivet 25
R14–19 Nylon Washer 2
S16–11 Hex Castle Nut 8
T 393–53–20 Strap Anchor 4
W25–77 Pop Rivet 8
Y 7900–1–102 Velcro Pile Tape A/R
Z 919–20–65 Head End Support Ass’y1
AA 1–49 Flat Hd. Mach. Screw 2
AB 25–40 Pop Rivet 8
AC 4–54 Hex But. Hd. Cap Screw 4
AD 460–2–32 Grounding Cable 1
AE 11–2 Flat Washer 3
AF 919–20–57 Midsection Support Ass’y1
AH 8–31 Shoulder Bolt 2
AL 2–44 Round Hd. Mach. Screw 1
AM 11–108 Flat Washer 2
AN 37–34 Hole Plug 2
AP 946–1–31 Head End Litter Support 2
AR 25–50 Pop Rivet 4
AS 3–40 Hex Hd. Cap Screw 2
AT 16–36 Nylock Nut 2
AW 926–32–20 Scratch Protector 2
AY 926–33–39 Midsection Skin 1
2”Mattress p/n 1059–224–140
3”Mattress p/n 1059–324–140
4”Mattress p/n 1059–424–140
Foot Skin Retrofit Kit p/n 919–34–35. (To change 1 piece foot skin to 2 piece).

14
Fowler Assembly
Assembly part number 926–32–55 (reference only)
Item Part No. Part Name Qty.
A 926–32–28 Fowler Plug, Right 1
B 926–32–27 Fowler Plug, Left 1
C 926–33–38 Fowler Skin, Alum. 1
D 926–33–57 Fowler Tube 1
F25–55 Pop Rivet 10
H25–77 Pop Rivet 4
J 460–4–39 Handle 1
K15–12 Jam Nut 4

15
Siderail and Bumper Assembly, Left
Assembly part number 919–26–30 (reference only)
Item Part No. Part Name Qty.
A (page 17) Siderail Assembly, Left 1
B14–19 Washer 15
C4–53 But. Hd. Cap Screw 5
D16–11 Flexlock Nut 6
E14–17 Washer 6
F 946–1–41 Cap 1
H 919–1–72 Bumper, Left 1
J4–56 Soc. Hd. Cap Screw 1
K3–2 Hex Hd. Cap Screw 2
L16–16 Fiberlock Nut 2
M 946–26–12 Siderail Pivot 5

16
Siderail and Bumper Assembly, Right
Assembly part number 919–26–31 (reference only)
Item Part No. Part Name Qty.
A (page 18) Siderail Assembly, Right 1
B14–19 Washer 15
C4–53 But. Hd. Cap Screw 5
D16–11 Flexlock Nut 6
E14–17 Washer 6
F 946–1–41 Cap 1
H 919–1–71 Bumper, Right 1
J4–56 Soc. Hd. Cap Screw 1
K3–2 Hex Hd. Cap Screw 2
L16–16 Fiberlock Nut 2
M 946–26–12 Siderail Pivot 5

17
Left Siderail Assembly
Assembly part number 919–26–34 (reference only)
Item Part No. Part Name Qty.
A 919–26–40 Top Rail 1
B25–61 Semi–Tubular Rivet 5
D 919–26–37 Upright 4
E 919–26–38 Latch Upright 1
H 919–26–39 Siderail Latch Assembly 1
J4–49 Hex Soc. But. Hd. Cap Screw 2
K 946–26–35 Pivot Sleeve 1
L52–13 Spacer 5
M52–14 Spacer 5
N37–43 Siderail End Plug 1
P37–42 Hole Plug 5
R37–44 Modified Siderail End Plug 1

18
Right Siderail Assembly
Assembly part number 919–26–36 (reference only)
Item Part No. Part Name Qty.
A 919–26–40 Top Rail 1
B25–61 Semi–Tubular Rivet 5
D 919–26–37 Upright 4
E 919–26–38 Latch Upright 1
H 919–26–39 Siderail Latch Assembly 1
J4–49 Hex Soc. But. Hd. Cap Screw 2
K 946–26–35 Pivot Sleeve 1
L52–13 Spacer 5
M52–14 Spacer 5
N37–43 Siderail End Plug 1
P37–42 Hole Plug 5
R37–44 Modified Siderail End Plug 1

390–25 Standard, Removable I.V. Pole Assembly
19
Item Part No. Part Name Qty.
A24–23 Plastic Knob 1
C 390–3–53 Double I.V. Ass’y1
D 393–3–43 Tube Assembly 1