DIR Mar Egeo II User manual

INSTRUCTION MANUAL
Mar Egeo II
8230-2G
®

Net weight: 138lbs. / 63 KG
Gross weight: 165lbs. / 75 KG
Maximum load: 330lbs. / 150 KG
Rated voltage: 220-240V, 50Hz(UK)
Rated voltage: 100-120V, 60Hz(USA)
Output voltage: DC 24V
75°

Headrest is removable
Paper Roll Holder
Adjust paper roll holder by
tightening/loosening knob

Roller Wheels Engagement
Pull lever upwards to
disengage roller wheel
function
Push downwards on lever to
engage roller wheel mechanism for
easy maneuvering of bed.

Pull the adjustment lever
Backrest Adjustment Lever
up, hold the backrest to
the position you prefer
and release the lever to
Backrest
lock the backrest.
Please do not tighten the
screw too much in case the
lever can not work properly.

Hand Remote Function
P1 P2
Lower FunctionRaise Function
Press the button to raise the facial bed.
Press the button to lower the facial bed.
®

Foot Remote Function
Push the button by foot to raise the facial bed.
Push the button by foot to lower the facial bed.
Lower FunctionRaise Function

Wipe clean with a cloth dampened in a mild leather cleaner.
Wipe dry with a clean cloth.
Avoid the use of abrasives, bleaches or solvents.
-5 C
50 C
45% Storage and using environment
Please do not place this product under strong light or in moist environment, to
85% avoid the damage on product. It can be used in the temperature of -5ºC~50 ºC
and humidity of 45%~85%
After an initial period of use, check all fastenings for any loos-
!ened screws etc. If found, please tightened appropriately.
Please keep children away from the product for safety reason.
If the power cord has any damage, please contact the technical
Never remove and wash faux leather covers.
support team.

If you meat problems while using this product, please try the given solutions.
If there is still a problem after trying the solution given in this troubleshooting
guide, please stop using the product and contact our customer service team on
[phone]
Problems Causes Solutions
When press the remote
control, The bed doesn’t
move.
When clients use the
bed, the bed shakes or
makes noise.
1. Electrical plug is not inserted
well.
2. Transformer links to each plug
which is not inserted well.
Screws come loose.
1. Pull out plug and insert it again.
2. Pull out the transformer plug under
the bed and insert it again.
Tighten each screw.

66 Rea Street South
Birmingham
B5 6LB
UK
-----------------------------
Tel:
[phone]
-----------------------------
Email:
[e-mail]
DIR BIRMINGHAM
[email protected]
Unit 1 River Road
Business Park
33 River Road, Barking
Greater London
IG11 0DA
UK
-----------------------------
Tel:
[phone]
--------- --------------------
Email:
DIR LONDON
USA
Tel:
sale
DIR NEW YORK
575 Underhill Blvd.
Suite 170
Syosset, NY 11791
---------------------------
[phone]
[phone]
-------- ---------------------
Email:
[e-mail]
Warranty
Product care
Brush away excess hair
Clean surface with damp cloth or use
simple soap & water solution.
Avoid using corrosive clean-
ing agents such as bleaches.
Do not remove upholstery
for cleaning
The warranty period is one year. DIR warrants to you, the original buyer, that goods shall be
free of defects in material and/or
workmanship attributable to manufacture for one year from date of receipt of product. Damage resulting from improper handling
after merchandise is received, or from exposure to weather or extreme atmospheric conditions is not covered by the warranty.
For any other information please contact our support team: