involight LEDRING800 User manual

DMX LED Hexo moon 360*10 RGB manual
A. SPECIFICATION:
1. Size:555×555×180mm
2. Weight:6.3kg
3. Power consumption:45W
4. Power input:AC110~240V/60~50HZ
5. LEDs:360PCS(120R,120G,120B)10mm
6. Beam angle:30 degree(20/40 degree optional)
7. Built-in programs,auto running,DMX mode,M/S,sound-active mode,static color
8. Selectable 2,3,4,7,14,26 channels
9. LED display for easier operation
10. Very good effects for the center use
11. Inner box:61*61*23.5cm
12. Master carton:63*63*50cm
13. 2 pcs/ctn
B.OPERATION:
After power on, Press “MODE”button to activate the main menu: Built-in programs mode, Auto running
mode, DMX mode, Slave mode, sound-activited mode.
“SETUP”is to set the relative specification for current mode.
“UP”is to add the value of current specification.
“DOWN”is to decrease the value of current specification.
Built-in programs-- running one of 22built-in programs
Auto run—running built-in programs one after another in continuous loop.
DMX mode--controlled by DMX controller
Slave mode—the projectors in this mode will be synchronously run with the projectors in master mode
Sound active mode-- running by sound - activated
Static color mode: you can set 255*255*255 static colors.
1. built-in programs mode
Press mode until it shows Prxx, you can select 22 different built-in Programs. press“SETUP”and “UP”
“DOWN”buttons to select the programs (from Pr01 to Pr22) and select the desired program values.
When it shows Pr01, press “SETUP”to choose the seven static color.
When it is Pr02 to Pr22, press “SETUP” and “UP” “DOWN”buttons, you can set the values for
flash(FS00-FS99), fading time(Fd00-Fd99), running speed(SP00-SPFL).
When it is Pr21and Pr22, you can set the background color and chasing color for this effect, switch it from 1-
-r (background color)to 2- -r(chasing color) by “SETUP”, adjust different colors by “UP” “DOWN”.

2. Auto run mode
You can press “MODE”button to select auto run mode, it shows , then it will run the built-in
programs automatically.
Press “SETUP”, it shows n. 001, then you can adjust the running loops number by “UP” “DOWN”
If continuing pressing “SETUP”, it will show SPxx, Fdxx, FSxx, then you can set the value for speed, fading
and flash by “UP” “DOWN”
3. DMX mode
You can control the devices individually via your DMX-controller. Press “MODE”button until it shows
, this means DMX address is 001, you can set the DMX address by “UP”and“DOWN”buttons. If
press “SETUP”button, it will show d-p1 , it means the device is in which DMX mode 1. You can switch
these DMX modes by “UP”and“DOWN”buttons. There are 6 DMX modes.
DMX value as follows:
DMX mode1：d-P1
CH1 CH2 CH3
R G B
0—255 dimming 0—255 dimming 0—255 dimming
DMX mode2：d-P2
CH1 CH2 CH3 CH4
R G B Master
dimmer
0—255 dimming 0—255 dimming 0—255 dimming 0—255 dimming
DMX mode3：d-P3
CH1 CH2 CH3 CH4 CH5 CH6 CH7
R G B R G B R
0—255 dimming 0—255 dimming 0—255 dimming 0—255 dimming 0—255 dimming 0—255dimming 0—255 dimming
CH8 CH9 CH10 CH11 CH12 CH13 CH14
G B R G B flash Master dimmer
0—255 dimming 0—255 dimming 0—255 dimming 0—255 dimming 0—255 dimming 0—255 0—255 dimming

DMX mode4：d-P4
CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9
R G B R G B R G B
0—255 dimming 0—255 dimming 0—255
dimming
0—255
dimming
0—255
dimming
0—25
dimming
0—255
dimming
0—255
dimming
0—255
dimming
CH10 CH11 CH12 CH13 CH14 CH15 CH16 CH17 CH18
R G B R G B R G B
0—255 dimming 0—255 dimming 0—255
dimming
0—255
dimming
0—255
dimming
0—255
dimming
0—255
dimming
0—255
dimming
0—255
dimming
CH19 CH20 CH21 CH22 CH23 CH24 CH25 CH26
R G B R G B flash Master
dimmer
0—255 dimming 0—255 dimming 0—255
dimming
0—255
dimming
0—255
dimming
0—255
dimming
0—255
Flash
0 = OFF
0-255 Light
0=OFF
DMX mode5：d-P5
CH1 CH2
NO. DMX value FUNCTION SPEED
1 0—7 OFF Value=0 OFF
2 8—15 red
SPEED
0—255
3 16—23 Yellow
4 24—31 Green
5 32—39 Cyan
6 40—47 Blue
7 48—55 Purple
8 56—63 White
9 64—71 PROGRAM02
10 72—79 PROGRAM03
11 80--87 PROGRAM04
12 88—95 PROGRAM05
13 96—103 PROGRAM06
14 104—111 PROGRAM07
15 112—119 PROGRAM08
16 120—127 PROGRAM09
17 128—135 PROGRAM10
18 136—143 PROGRAM11
19 144—151 PROGRAM12
20 152—159 PROGRAM13
21 160—167 PROGRAM14
Flash frequency

22 168—175 PROGRAM15
23 176—183 PROGRAM16
24 184—191 PROGRAM17
25 192—199 PROGRAM18
26 200—207 PROGRAM19
27 208—215 PROGRAM20
28 216—223 PROGRAM21
29 224—231 PROGRAM22
30 232--255 Sound Mode Sensitivity
0--255
DMX mode6：d-P6
CH1 CH2 CH3 CH4 CH5 CH6 CH7
R G B NO. DMX value FUNCTION SPEED FLASH Master
dimmer
0—255
dimming
0=OFF
0—255
dimming
0=OFF
0—255
dimming
0=OFF
10—7 OFF NO USE NO USE
0—255 dimming (0
= OFF)
28—15 red
SPEED
0—255
FLASH
0—255
3 16—23 Yellow
424—31 Green
532—39 Cyan
640—47 Blue
7 48—55 Purple
856—63 White
964—71 PROGRAM01
10 72—79 PROGRAM02
11 80--87 PROGRAM03
12 88—95 PROGRAM04
13 96—103 PROGRAM05
14 104—111 PROGRAM06
15 112—119 PROGRAM07
16 120—127 PROGRAM08
17 128—135 PROGRAM09
18 136—143 PROGRAM10
19 144—151 PROGRAM11
20 152—159 PROGRAM12
21 160—167 PROGRAM13
22 168—175 PROGRAM14
23 176—183 PROGRAM15
24 184—191 PROGRAM16
25 192—199 PROGRAM17
26 200—207 PROGRAM18
27 208—215 PROGRAM19

28 216—223 PROGRAM20
29 224—231 PROGRAM21
30 232--255 Sound Mode Sensitivity
0--255
4. Slave mode
Press “MODE” button to select SLAv to run the slave mode.
5. Sound active mode
Press “MODE” button to select SU31 to be run, now if activated one time, it will run one step, adjust the
sensitivity by “UP” and “DOWN” buttons.
Sensitivity: SU01-SU31
6. Static color mode
Press “MODE” button to select Colr to be run, press “SETUP”, it will show r/G/b255, then you can adjust the
colors by “UP”and“DOWN”buttons.