involight TRINITY150LED User manual

User manual
TRINITY150LED
Hybrid moving head 3 in1 Spot / Wash / Beam
Ver. 1.0

Table content
INVGROUP Germany GmbH
Senefelder-Ring 91
21465 Reinbek
Congratulation for choosing INVOLIGHT TRINITY150LED. With this device you become
an owner of a professional hybrid moving head with our latest technology. In order to
make your TRINITY150LED long lasting, please read these instructions carefully before
operation. If you have any questions, please contact your local INVOLIGHT dealer.
Part 1: Warnings: .........................................................................................................................................................3
1.1 Meaning of the safety symbols and signal words..............................................................................................3
1.2 Safety instructions:............................................................................................................................................4
Part 4. Functions and operations.................................................................................................................................7
4.1 QVGA display:...................................................................................................................................................7
4.2 Menu structure: .................................................................................................................................................7
4.3 Connections:....................................................................................................................................................11
4.4 Connections in DMX mode „DMX“: .................................................................................................................12
4.5 MASTER-SLAVE mode:..................................................................................................................................13
4.6 STAND-ALONE mode: ....................................................................................................................................13
5. Part DMX-Assignment. ..........................................................................................................................................13
Part 8. Technical specifications..................................................................................................................................19
Part 9. Environmental protection. ..............................................................................................................................21
Part 10. WARRANTY:................................................................................................................................................21
2

Part 1: Warnings:
1.1 Meaning of the safety symbols and signal words
DANGER!
A combination of this signal word and a symbol indicates an imminently hazardous situation that leads to death or serious injury
if not avoided.
WARNING!
A combination of this signal word and a symbol indicates an imminently hazardous situation that can lead to death or serious
injury if not avoided.
CAUTION!
A combination of this signal word and a symbol indicates an imminently hazardous situation, which can lead to minor injuries if
not avoided.
NOTE!
A combination of this signal word and a symbol indicates a directly dangerous situation, which can lead to material and environ-
mental damage if not avoided.
Warning of a hazard.
.
Warning of dangerous voltage.
Earth before use.
General prohibition sign.
Disconnect the mains plug before opening.
3

1.2 Safety instructions:
This information sheet contains important information of safety operation of the device. Ensure that this information
is available to all persons using this device.
The rating plate is located on the bottom of the product.
Please read all warnings and operating instructions carefully before using this unit. Keep this manual for future ref-
erence. Please follow all instructions in this manual.
Electric shock due to improper mains connection.
This product corresponds to the protection class I in its design and may only be operated at a socket with pro-
tective contact. Use only the supplied power cord to connect. Do not modify the power cord or plug, and check
the insulation of the cable regularly for damage. Failure to do so may result in electric shock, fire or life. In case
of uncertainties, contact an authorized electrician.
DANGER!
Electric shock due to high voltages inside the device.
The device contains components that are subject to a high electrical voltage. Do not modify or disassemble the
unit. There are no user-serviceable components inside the device. Failure to do so may result in electric shock,
fire or life.
NOTE!
Disconnection from the mains.
The mains plug is the main disconnect element. Unplug the power cord from the power source. Make sure that
the power outlet is close to the unit and is easily accessible.
DANGER!
WARNING!
Operating conditions.
To avoid damage, do not expose the unit to liquids or moisture. If there is a suspicion that liquid may have pe-
netrated into the device, the device must be immediately disconnected from the mains. This also applies if the
unit is exposed to high humidity. Even if the device still seems to work, it must be checked by an expert whether
the liquid penetration may have been impaired. Reduced insulation can cause fatal electric shocks. Avoid direct
sunlight, strong dirt and strong vibrations.
WARNING!
Eye injuries due to high light intensity.
Never look directly into the light source. A direct view into the beam can lead to retinal burns and must be avo-
ided at all circumstances.
WARNING!
Risk of epileptic seizure
4

1.3 Intended use.
The INVOLIGHT "TRINITY150LED" is a light unit with colored light effects. It was developed and designed for pro-
fessional use in the field of event technology - exclusively indoors. The device may only be used by persons with
sufficient physical, sensory and mental abilities as well as the appropriate knowledge and experience. Other per-
sons may only use the device if they are supervised or instructed by a person responsible for their safety.
The device is only approved for AC power, 100-240Volt and 50 / 60Hz power supply.
Light effect devices such as "TRINITY150LED" are sensitive and technically advanced devices that must be han-
dled with care. Therefore, avoid shocks and violence during assembly / disassembly and the use of the device.
Install "TRINITY150LED" only in places that are protected from dust, moisture and excessive heat. The approved
operating temperature must be in the range -5 ° to + 45 ° Celsius and the relative humidity must not exceed 50%
(at + 45 °)! Direct sunlight should be avoided during use and during transport. In the interests of your own safety
and those of others, make sure that there are no cables around.
During thunderstorms, the device must be disconnected from the power supply!
Moving heads are generally to be secured with an approved safety rope when suspended!
"TRINITY150LED" is designed only for professional use, if you are familiar with the functions and are familiar with
the operation. Only allow other people to work with the device if you are sure they are familiar with the features as
well. In most cases, malfunctions are a consequence of a previous maloperation.
Damage resulting from failure to comply with the intended use and instructions given in this manual will void the
warranty and may result in consequences such as short-circuit, fire, electric shock, or dropping the device (s).
Unauthorized changes to the device are prohibited for security reasons.
The manufacturer is not liable for damage caused by improper installation and insufficient security!
Part 2: Installation.!
Unpack the device and carefully check for damages before using it. Place the unit in a suitable place or hang it on
a suitable crossbar. For suspended installation, the device must be secured with an approved safety rope. In addi-
tion, the mounting bracket must be screwed with the enclosed screws and tightened! Then connect the device to
the mains and, if necessary, connect a DMX cable and connect it to other devices or a DMX controller. More about
DMX or Master / Slave operation also in part 3 and 4.
During installation, provisions of the BGV C1 (formerly VBG 70) and DIN 15560 must be observed! Autho-
rized specialists may only carry out the installation!
Avoid long periods of continuous flashing and, in particular, flash frequencies between 10 and 20 flashes / se-
cond, as epileptic seizures can be triggered in susceptible individuals (especially for epileptics)
NOTE!
Risk of fire.
Never cover the unit or the ventilation slots. Do not mount the unit directly next to a heat source. Keep the devi-
ce away from the fire and heat.
WARNING!
Do not leave the packaging material careless. Plastic films, Styrofoam parts etc. could be a dangerous toy for
children!
5

IMPORTANT! Overhead mounting requires a lot of experience. This includes knowledge of the load bearing capac-
ity, the installation material used and the safety inspections of the material and the projector used, but the required
experience is not limited to this. If you do not have the appropriate qualification. Instead, commission a professional
installer. Incorrect installation may result in personal injury and / or damage to property.
NOTE!
Possible damage due to movement of the device.
Make sure there is enough room around the device for the movement of the head (pan,
tilt).
6
Omega kampó és tartó-
szerkezete
Biztonsági drótkötél (safety)
C-kampó / bilincs

Part 4. Functions and operations.
4.1 QVGA display:
Connect the "TRINITY150LED to the mains. The device performs the usual reset procedure. Wait until it's done.
The LCD display with 4-button operation is the heart of the "TRINITY150LED". This can be used to set all functions
and modes. Below, the individual functions and modes are listed in tabular form.
1. Switch DMX channel mode
2. Product information
3. Invert display
4. Menu
5. Instructions
6. DMX start address
7. DMX start address for subsequent device
4.2 Menu structure:
Mode
Menu
Description
7
1.
2.
3.
4.
6.
5.
7.
Return
Down
UP
Enter

Address
Address Setting
DMX addressing.
a) Press the (Enter) key until “DMX Address” is displa-
yed.
b) Press the ▲(Up) or ▼(Down) button to select the
desired address.
c) As soon as the correct address is shown on the dis-
play, confirm with the (OK) key
d) Press the (Return) key to exit the selection without
saving.
Fixture
Channel Mode
Standard
Mode
This allows you to select your desired DMX channel
mode.
a) Press the (Enter) key until “Channel Mode” is displa-
yed.
b) To select the desired DMX mode, press the ▲(Up)
or ▼(Down) button.
c) To confirm and exit the menu, press the (OK) key
d) Press the (Return) key to exit the selection without
saving.
Extend Mode
Pan/Tilt Setting
Invert Pan
Pan-tilt inversion.
a) Press the (Enter) key until "Pan Invert" or "Tilt Invert"
is displayed.
b) Press the ▲(Up) or ▼(Down) button until "Yes" or
"No" is displayed.
c) To confirm and exit the menu, press the (OK) key
d) Press the (Return) key to exit the selection without
saving.
Invert Tilt
Swap Pan-
Tilt
The PAN and Tilt channels can be swapped under PAN
/ TILT SWAP.
a) Press the (Enter) key until "Swap Pan-Tilt" is displa-
yed.
b) Press the ▲(Up) or ▼(Down) button until "On" or
"Off" is displayed.
c) To confirm and exit the menu, press the (OK) key
d) Press the (Return) key to exit the selection without
saving.
W-DMX
Activate W-DMX mode.
a) Press the (Enter) key until “W-DMX” is displayed.
b) Press the ▲(Up) or ▼(Down) button until "On" or
"Off" is displayed.
c) To confirm and exit the menu, press the (OK) key
d) Press the (Return) key to exit the selection without
saving.
8

Manual
Reset
Head Reset
With this function you can reset the device.
a) Press the (Enter) key until "Reset" is displayed.
b) To select the desired reset functions, press the ▲
(Up) or ▼(Down) button.
c) To confirm and exit the menu, press the (OK) key
d) Press the (Return) key to exit the selection without
saving.
Pan/Tilt Re-
set
All reset
Scene
Mode
This allows you to select the scene mode.
a) Press the (Enter) key until “Mode” is displayed.
b) To select the desired mode function, press the ▲
(Up) or ▼(Down) button.
c) To confirm and exit the menu, press the (OK) key
d) Press the (Return) key to exit the selection without
saving.
Index
Index selection.
a) Press the (Enter) key until “Index” is displayed.
b) Press the ▲(Up) or ▼(Down) button to select the
desired index.
c) To confirm and exit the menu, press the (OK) key
d) Press the (Return) key to exit the selection without
saving.
Enable
With this function you can activate the device.
a) Press the (Enter) key until “Enable” is displayed.
b) Press the ▲(Up) or ▼(Down) button until "On" or
"Off" is displayed.
c) To confirm and exit the menu, press the (OK) key
d) Press the (Return) key to exit the selection without
saving.
9

Time
With this function you can set the time.
a) Press the (Enter) key until “Time” is displayed.
b) Press the ▲(Up) or ▼(Down) button to select the
desired time.
c) To confirm and exit the menu, press the (OK) key
d) Press the (Return) key to exit the selection without
saving.
Save DMX
With this function you can save the DMX values.
a) Press the (Enter) key until “Save DMX” is displayed.
b) Press the ▲(Up) or ▼(Down) buttons to confirm or
cancel the DMX storage.
c) To confirm and exit the menu, press the (OK) key
d) Press the (Return) key to exit the selection without
saving.
Channel
Pan
0-255
"Channel control" operating mode
The "Manual control" mode can only be activated if the
device is working alone or is the master in a master-
slave combination. This setting is only relevant if the
device is not controlled by DMX.
a) Press the (Enter) key until “chanel control” is displa-
yed.
b) To select the desired parameter, press the ▲(Up) or
▼(Down) button.
c) Press (OK) to edit the values.
d) Press the ▲(Up) or ▼(Down) buttons to select the
value between "0" and "255".
e) Press the (OK) button to confirm and exit the menu.
f) Press the (Return) key to exit the selection without
saving.
Tilt
0-255
Dimmer
0-255
Strobe
0-255
Color wheel
0-255
Fixed-Gobo
0-255
Rot-Gobo
0-255
Rot-Gobo
Rot
0-255
Prism
0-255
Prism Rot
0-255
Frost
0-255
Focus
0-255
Zoom
0-255
System
control
0-255
System
Language
Language selection
Display
Normal
Invert display (for example in flight operations).
a) Press the (Enter) key until "Display" appears.
b) To select the desired mode, press the ▲(Up) or ▼
(Down) button.
c) To confirm and exit the menu, press the (OK) key
d) Press the (Return) key to exit the selection without
saving.
Invert
10

4.3 Connections:
1. DMX OUT: 3-pin XLR output socket for routing the DMX control signal.
2. DMX IN: -pin XLR input socket for connecting a DMX controller (such as DMX mixer).
3. POWER IN: Powercon compatible AC power input.
4. POWER OUT: Powercon compatible mains power output.
5. ON/OFF SWITCH: ON: power is ON. OFF: Power is OFF.
6. FUSE holder F8A 250V.
When changing the fuse, always disconnect the mains plug and only use the specified fuse types!
A POWERCON compatible wiring
Backlight Setting
Auto
Display lighting (The display goes dark after 15 se-
conds without pressing a button or is always on.)
a) Press the (Enter) key repeatedly until the display
shows "Settings".
b) Press the ▲(Up) or ▼(Down) button until "On" or
"Off" is displayed.
c) To confirm and exit the menu, press the (OK) key
d) Press the (Return) key to exit the selection without
saving.
Keep on
Factory Reset
Reset to factory settings
Device TOU(Min)
Show device information
Fans Voltage
Fan voltage information
Error record
Error recording information
About
Displays the current software version
11

Ground must be connected!
When changing the fuse, always disconnect the mains plug and only use the specified fuse types!
DMX connection in DMX mode:
An XLR connector as a DMX output, an XLR connector as a DMX input.
3-pin XLR- Connector: 5-pin XLR-Connector:
Pin Function: Pin Function:
1. Ground 1. Ground
2. DMX- 2. DMX-
3. DMX+ 3. DMX+
4. free, or 2. connection (2nd link, optional) DMX
5. free, or 2. connection (2nd link, optional) DMX+
4.4 Connections in DMX mode „DMX“:
Color
Pin
International
Brown
Phase
L
Blue
Zero
N
Yellow/green
Ground
12

From a cable length of 300m or to 32 connected DMX devices, the signal should be amplified by a DMX splitter /
repeater (eg Involight DMXS4, DMXS6 or DMXS8) to ensure error-free data transmission.
IMPORTANT: The last device in a DMX chain should have a terminator connected to terminate the chain. DMX
terminators are commercially available, but can also be built yourself. A 120 ohm resistor must be soldered in an
XLR plug between the two poles (+ and -).
DMX connectors:
4.5 MASTER-SLAVE mode:
When you configure a group of devices in the "Master / Slave" mode, the first device controls the others and allows
an automatic or music-controlled and synchronized show. This feature is especially useful for starting a show with-
out great programming. Connect the DMX output of the master device to the DMX input of the first slave device.
Then, connect the DMX output of the first slave device to the DMX input of the second slave device, and so on.
4.6 STAND-ALONE mode:
A TRINITY150LED can also be used in stand-alone mode without a DMX controller. Disconnect Trinity150LED
from the controller and call the pre programmed program.
5. Part DMX-Assignment.
A TRINITY150LED has 15 és 20 channel modes.
NOTE: Basic knowledge of the DMX512 control standard is required so that the device can be operated and
programmed correctly with a DMX controller
Mode/Channel
FunKCIÓ
ÉRTÉK
LEÍRÁS
DMX
Mode
20CH
DMX
Mode
15CH
1
1
PAN
0-255
PAN movement
2
PAN Fine
0-255
PAN FINE movement
13

3
2
TILT
0-255
TILT movement
4
TILT Fine
0-255
TILT FINE movement
5
3
Pan/Tilt Speed
0-255
PAN/TILT speed
6
4
Dimmer
0-255
Dimmer 0-100%
7
Dimmer Fine
0-255
Dimmer fine
8
5
Strobe
0-3
Shutter closed
4-103
Strobe Effect, from slow to fast
104-107
No Strobe Effect (Shutter open)
108-207
Pulsing strobe, from slow to fast
208-212
No Strobe Effect (Shutter open)
213-251
Strobe effect in random mode, from slow to fast
252-255
No Strobe effect (Shutter open)
9
6
Farbrad
0-127
Color position
128-130
Color 1
131-133
Color 2
134-136
Color 3
137-139
Color 4
140-142
Color 5
143-145
Color 6
146-148
Color 7
149-151
Color 8
152-154
Color 9
155-157
Color 10
158-160
Color 11
161-163
Color 12
164-166
Color 13
167-169
Open
170-212
Rotation clockwise, from slow to fast
213-255
Rotation anti-clockwise, from slow to fast
0-2
Open
3-5
Gobo1
6-8
Gobo2
14

10
7
Statische Gobos
9-11
Gobo3
12-14
Gobo4
15-17
Gobo5
18-20
Gobo6
21-23
Gobo7
24-26
Gobo8
27-29
Gobo9
30-32
Gobo10
33-35
Gobo11
36-38
Gobo12
39-41
Gobo13
42-44
Gobo14
45-47
Gobo15
48-50
Gobo16
51-58
Gobo 1 Shake: From slow to fast
59-66
Gobo 2 Shake: From slow to fast
67-74
Gobo 3 Shake: From slow to fast
75-82
Gobo 4 Shake: From slow to fast
83-90
Gobo 5 Shake: From slow to fast
91-98
Gobo 6 Shake: From slow to fast
99-106
Gobo 7 Shake: From slow to fast
107-114
Gobo 8 Shake: From slow to fast
115-122
Gobo 9 Shake: From slow to fast
123-130
Gobo 10 Shake: From slow to fast
131-138
Gobo 11 Shake: From slow to fast
139-146
Gobo 12 Shake: From slow to fast
147-154
Gobo 13 Shake: From slow to fast
155-162
Gobo 14 Shake: From slow to fast
163-170
Gobo 15 Shake: From slow to fast
171-178
Gobo 16 Shake: From slow to fast
179-216
Rotation clockwise, from slow to fast
217-255
Rotation anti-clockwise, from slow to fast
15

11
8
Rotierende Go-
bos
0-5
Open
6-11
Gobo1
12-17
Gobo2
18-23
Gobo3
24-29
Gobo4
30-35
Gobo5
36-41
Gobo6
42-47
Gobo7
48-53
Gobo8
54-63
Gobo 1 Shake: From slow to fast
64-73
Gobo 2 Shake: From slow to fast
74-83
Gobo 3 Shake: From slow to fast
84-93
Gobo 4 Shake: From slow to fast
94-103
Gobo 5 Shake: From slow to fast
104-113
Gobo 6 Shake: From slow to fast
114-123
Gobo 7 Shake: From slow to fast
124-133
Gobo 8 Shake: From slow to fast
134-194
Rotation clockwise, from slow to fast
195-255
Rotation anti-clockwise, from slow to fast
12
9
Gobo rotation
0-127
Gobo indexing
128-190
Rotation clockwise, from slow to fast
191-192
Stop
193-255
Rotation anti-clockwise, from slow to fast
13
10
Prisma
0-127
Prism effect OFF
128-191
Prism 1 ON
192-255
Prism 2 ON
14
11
Prisma rotation
0-127
Prism position
128-189
Rotation clockwise, from slow to fast
190-193
Stop
194-255
Rotation anti-clockwise, from slow to fast
15
12
Frost Filter
0-255
Frost effect 0-100%
16
13
Focus
0-255
Focus 0-100%
16

Roto gobos:
Outer diameter: 12 mm +0/-0,2 mm
Max. motive diameter: 11.5 mm
1. Unplug the device from all poles and let it cool down.
2. Remove both head covers. Position the head so that the front lens faces down.
17
Focus fine
0-255
Focus fine 0-100%
18
14
Zoom
0-255
Zoom 0-100%
19
Zoomv fine
0-255
Zoom fine 0-100%
20
15
Service
0-31
No function
32-63
Head Reset
64-95
Resset TILT/PAN
96-127
Reset All
128-159
Dimmer «Exp-Curve»
160-191
Dimmer «Linear»
192-223
Dimmer «Log-Curve»
224-255
Dimmer «S-Curve»
17

3. Turn the desired gobo wheel until the gobo to be replaced is at the top.
4. Grasp the gobo holder (3) by its teeth, lift it slightly off the gobo wheel and
pull out the holder. ATTENTION: For glass gobos, do not touch the glass with your fingers!
5. Loosen the retaining spring (1) with a small screwdriver and release the gobo from the holder
a soft pad will fall.
6. Place the new gobo in the holder. The gobo has at its edge a small position point (8), which must aim at the posi-
tion point (4) on the gobo holder (5).
7. Replace the gobo holder (3) under the spacer grooves (6, 7) in the rotating gobo wheel so that
Positioning point (4) is directed to a small tooth-like projection (5) on the edge of the rotating gobo wheel.
IMPORTANT! When the gobo holder is placed back on the rotating gobo wheel, one of the adjacent gobo holders
must be aligned according to the same rule, i. its position point (4) must be directed to the tooth-like projection (5)
on the edge.
NOTE. The index magnet (9) of the gobo holder has the same function as the position point (4) on the remaining
gobo holders
8. Replace more gobos if necessary. Always proceed as described above.
9. If no further work is to be done, mount the head covers and release the gate lock before operating the device.
Fix gobo wheel, prisms:
Rotogobos:
18

Color wheel
Part 6: Troubleshooting.
The device does not work, no light:
Check the mains connection and the main fuse.
No response to the DMX controller:
Check the DMX connectors and cables for correct connection. Check the address settings and the DMX polarity.
Check whether the DMX cables are near or next to high voltage cables. Try another DMX controller.
If the instructions given here do not lead to success, please contact your specialist dealer.
Part 7: Maintenance.
Cleaning and maintenance:
It is essential that you clean the projector at regular intervals. Disconnect the device from the mains before mainte-
nance work!
The objective lens should be cleaned on a weekly basis, since fog fluid residues settle very quickly, which consid-
erably reduce the light output of the device.
Clean the fan monthly.
The dichroic color filters, the gobo wheel and the inner lenses should be cleaned on a monthly basis.
In order for the bearings of the rotating parts to work well, they must be lubricated approximately every 6 months.
For oiling use a syringe with a fine needle. The amount of oil must not be excessive to prevent the oil from leaking
while rotating.
Maintenance and service work is reserved exclusively for authorized specialist personnel!
Part 8. Technical specifications
19

MODEL NAME:
TRINITY150LED
Product type:
LED moving head
Type:
Hybrid Spot / Wash / Beam
LED Number:
1 pc LED
LED Type:
Osram Led Chip, white
Beam angle:
2°-22°
Static Gobos:
16 + open
Rotation Gobos:
8 indexing + open
Colors pectrum:
10 Color + open
Prism
4-facet linear and 8-facet
Gobo size:
Outer diameter (OD): 12mm / Inner diameter (ID) 11.5mm
DMX input:
XLR 3-PIN male
DMX output:
XLR 3-PIN female
DMX Mode:
20 or 15 channels
PAN movements:
540° 16bit
TILT movements:
270° 16 bit
Strobe frequency:
> 20 Hz
Standalone Mode:
Auto Run, Sound Control
Display:
QVGA Touch screen
Power supply connection:
Powercon compatible INPUT and OUTPUT
Housing:
Metal, ABS
Housing color:
Black (white optional)
Cooling:
Liquid cooling with fan
Illuminance:
133300 Lux @ 3m 0.6°, 9490Lux @ 3m 12°; 2267 Lux @ 3m 22°
Power:
100-240V 50/60Hz
Power consumption:
297W
Dimensions:
382x581x237mm
Weight:
18kg
USB port
For software update
20