involight LEDRX600 User manual

DMX LED Triangle Manual
Our DMX LED Triangle light offers many possibilities to achieve very nice laser effects which you want. It is
specially designed for the stages, disco, night clubs etc. Please read the manual before operation.
A. SPECIFICATION
1. Power input: AC 110V/240V, 60Hz/50Hz
2. Power consumption: 45W
3. LEDs: 18*3W (6R, 6G, 6B)
4. Control feature: Built-in programs, auto running, DMX mode, M/S, sound-active mode
5. DMX channels: 3 CH
6. Operation mode: LED display
7. Size: 370*320*295mm
8. Weight: 4.1kg
B. OPERATION
This series of product has rich effect programs, easier operation, there are five working modes:
Auto running mode
DMX mode
Built-in programs mode
M/S mode
Sound active mode
1. Auto Running Mode
1) Press”MODE”button, enter auto run mode menu “ ”.
2) Press “SETUP”button, enter setup auto run mode times menu "n×××"
3) Press “UP”or “DOWN”button to set up auto run mode time’s value ～.
4) Press “SETUP”button, enter setup auto running mode speed menu SP××.
5) Press “UP”or “DOWN”button to set up speed value ～(SP100).
6) Press “SETUP”button, enter setup auto run mode flash menu FS××.
7) Press “UP”or “DOWN”button to setup strobe value ～.

2. DMX Mode
1) Press “MODE”button, enter DMX mode menu d×××
2) Press “UP”or “DOWN”button to set up DMX address value ～.
3) Press “SETUP”button, enter setup DMX mode 3 CH.
DMX Mode：
CH1
CH2
CH3
NO.
DMX value
LEDs Programs
LEDs running speed
LEDs flash
frequency
1
0
OFF
NO USE
NO USE
2
1—10
PROGRAM01
SPEED 0—255
FLASH 0—255
3
11—21
PROGRAM02
4
22—32
PROGRAM03
5
33—43
PROGRAM04
6
44—54
PROGRAM05
7
55—65
PROGRAM06
8
66—76
PROGRAM07
9
77—87
PROGRAM08
10
88—98
PROGRAM09
11
99—109
PROGRAM10
12
110—120
PROGRAM11
13
121—131
PROGRAM12
14
132—142
PROGRAM13
15
143—153
PROGRAM14
16
154—164
PROGRAM15
17
165—175
PROGRAM16
18
176—177
PROGRAM17
19
178—188
PROGRAM18
20
189--255
Sound Mode
3. Built-in Programs Mode
1) Press “MODE”button, enter built-in program menu Pr××.
2) Press “UP”or “DOWN”button, select the effect programs ~ .
3) Press “SETUP”button, enter setup speed program menu SP××.
4) Press “UP”or “DOWN”button ,setup speed value ～(SP100).
5) Press “SETUP”button, enter setup strobe program menu FS××.
6) Press “UP”or “DOWN”button, setup strobe value ～.
4. M/S Mode

Press “MODE”button, enter the slave mode SLAV.
5. Sound Active Mode
1) Press “MODE”button, enter sound active mode SoUn.
2) Press “SETUP”mode, enter setup sound active sensitivity menu So××.
3) Press “UP”or “DOWN”button to set up the value of sound active sensitivity value ～.
C. LED Display Switching
1. Press “MODE”button to enter into the LED display switching mode menu LED
2. Press “SETUP”button to enter into the LED display ON or OFF.
3. Press “UP”or “DOWN”button to set up ON or OFF.
Remark: LED display will be on all the time if chose ON, and it would be switch off after 20 seconds if chose
OFF.
D. LED Display Inversion
1. Press “MODE”button to enter into the display inversion mode menu dISP.
2. Press “SETUP”button to set up the standard display dISP and inversion display dSIP.
E. Version
1. Press “MODE”button to enter into the version mode menu Ver.
2. Press “SETUP”button to enter into the version V10.