involight LEDBAR FX103 User manual

LED 2in1 Blinder Bar
User Manual
Thanks for choosing our goods please read this manual carefully before
your operating and keep this manual for future needs
1

Thank you for purchasing LED 2in1 Blinder Bar, every unit has been thoroughly
tested and has been shipped in perfect operating condition. Carefully check the
shipping carton for damage that may have occurred during shipping. If the
carton appears to be damaged, carefully inspect your fixture for any damage
and be sure all accessories necessary to operate the unit has arrived intact. In
the case damage has been found or parts are missing, please contact the
manufacturer or your dealer for further instructions. You now own a professional
lighting unit that offers endless possibilities.
For your own safety and that of others, please read this instruction manual
carefully before installing the unit.
Anyone involved in installing, operating or servicing the LED 2in1 Blinder
Bar must: • Be a qualified, authorized professional
•Strictly follow the instructions in this user
manual.
Please take the time to read this manual carefully and thoroughly before
installing and operating the luminaire. You should have a good knowledge of its
operating conditions and all pertinent product information.
After you have become familiar with this manual, we recommend that you keep
a copy for future use. All the information found in this manual
2

is subject to change without notice. We reserve the right to modify and upgrade
its range of products, with no obligation to integrate these changes into products
already sold.
Warning
●To prevent or reduce the risk of electrical shock or fire,do not expose the unit
to rain or moisture.
●Do not open the unit within five minutes after switching off.
●Please consider that damages caused by manual modifications to the device
are not subject to warranty.
Installation
The unit should be mounted via its screw holes on the bracket.Always ensure
that the unit is firmly fixed to avoid vibration and slipping while operating.And
make sure that the structure to which you are attaching the unit is secure and is
able to support a weight of 10 times of the unit’s weight. Also always use a
safety cable that can hold 12 times of the weight of the unit when installing the
fixture.
The equipment must be fixed by professionals. And it must be fixed at a place
where is out of the touch of people and has no one pass by or under it.
3

Specifications and Features:
•LEDs: 10pcs 3W CREE LEDs, 60pcs 5050SMD RGB LEDs
•Power Consumption:50W
•DMX Channels: 190 DMX Channels
•Refresh Rate: 500Hz
•Power: 6V 13.3A
•4 DMX Channels Mode: 9CH,15CH,42CH,190CH
•Control Protocol: Art-net, Kling-net, DMX
•Support RDM
•Front cover color: White and black
•Each LED can pixel control, can create fabulous image effects.
•XLR Connectors: 3pin&5pin XLR Connector
•Powercon in/out, Ethernet in/out
•Work mode: Auto, Sound, DMX, Artnet
•With handle and safe
•Power input:110~240V,50/60Hz
•Power Consumption:50W
•Size: 78x8x11cm
•Net Weight: 3.2KG
4

Product View
(Front)
(Back)
Product Description
•1: Menu
•2:Enter
5

•3: Up
•4:Down
•5:Display
•6:Safety loop
•7:3pin DMX Out
•8:5pin DMX Out
•9:Ethernet In
•10:Ethernet out
•11:3pin DMX In
•12:5pin DMX In
•13:Ground
•14:Powercon In
•15:Fuse
•16:Powercon Out
•17:Handle screw
•18:MIC
•19:Signal
Connection

DMX Channel function and values:
9 DMX Channels:
CH1
Dimmer
CH2
Strobe
CH3
Red
CH4
Green
CH5
Blue
CH6
Warm White Dimmer
CH7
Program 1~15
CH8
Program 16~30
238~255 Loop program
CH9
Program Speed
15 DMX Channels:
CH1
Dimmer
CH2
Strobe
CH3
Warm White 1 Dimmer
CH4
Warm White 2 Dimmer
CH5
Warm White 3 Dimmer
CH6
Warm White 4 Dimmer
CH7
Warm White 5 Dimmer
CH8
Warm White 6 Dimmer
7

CH9
Warm White 7 Dimmer
CH10
Warm White 8 Dimmer
CH11
Warm White 9 Dimmer
CH12
Warm White 10 Dimmer
CH13
All 5050 Red
CH14
All 5050 Green
CH15
All 5050 Blue
42 DMX Channels:
CH1
Dimmer
CH2
Strobe
CH3
Warm White 1 Dimmer
CH4
Warm White 2 Dimmer
CH5
Warm White 3 Dimmer
CH6
Warm White 4 Dimmer
CH7
Warm White 5 Dimmer
CH8
Warm White 6 Dimmer
CH9
Warm White 7 Dimmer
CH10
Warm White 8 Dimmer
CH11
Warm White 9 Dimmer
CH12
Warm White 10 Dimmer
CH13
Red square 1
8

CH14
Green square 1
CH15
Blue square 1
CH16
Red square 2
CH17
Green square 2
CH18
Blue square 2
..................................................................................
CH40
Red square 10
CH41
Green square 10
CH42
Blue square 10
190 DMX Channels:
CH1
Red 1
CH2
Green 1
CH3
Blue 1
CH4
Red2
CH5
Green 2
CH6
Blue 2
CH7
Red 3
CH8
Green 3
CH9
Blue 3
CH10
Red 4
CH11
Green 4
9

CH12
Blue 4
CH13
Red5
..................................................................................
CH177
RED 60
190 DMX Channels:
CH1
Red 1
CH2
Green 1
CH3
Blue 1
CH4
Red2
CH5
Green 2
CH6
Blue 2
CH7
Red 3
CH8
Green 3
CH9
Blue 3
CH10
Red 4
CH11
Green 4
CH12
Blue 4
CH13
Red5
..................................................................................
CH177
RED 60
CH178
Green 60
CH179
Blue 60
10

CH180
Warm White 1
CH181
Warm White 2
CH182
Warm White 3
CH183
Warm White 4
CH184
Warm White 5
CH185
Warm White 6
CH186
Warm White 7
CH187
Warm White 8
CH189
Warm White 9
CH190
Warm White 10
Troubleshooting
Following are a few common problems that may occur during operation.Here
are some suggestions for easy troubleshooting:
1. The unit does not work, no light and the fan does not work
a. check the connection of power and main fuse.
b. Measure the mains voltage on the main connector.
c. Check the power on Led.
2. Not responding to DMX controller
a. DMX LED should be on. If not, check DMX connectors, cables to see if
link properly.
11

b. If the DMX LED is on and no response to the channel, check the
address settings and DMX polarity.
c. If you have intermittent DMX signal problems, check the pins on
connectors or on PCB of the unit or the previous one.
d. Try to use another DMX controller.
e. Check if the DMX cables run near or run alongside to high voltage
cables that may cause damage or interference to DMX interface circuit.
3. Some units don’t respond to the easy controller
a. You may have a break in the DMX cabling. Check the LED for the
response of the master/slave mode signal.
b. Wrong DMX address in the unit. Set the proper address.
4. One of the channels is not working well
a. The stepper motor might be damaged or the cable connected to
the PCB is broken.
b. The motor’s drive IC on the PCB might be out of condition
5. Fixture Cleaning
The cleaning of internal and external optical lenses and/or mirrors must be
carried out periodically to optimize light output. Cleaning frequency depends
on the environment in which the fixture operates: damp, smoky or particularly
dirty surrounding can cause greater accumulation of dirt on the unit’s optics.
12

a. Clean with soft cloth using normal glass cleaning fluid.
b. Always dry the parts carefully.
Warranty
The LED 2in1 Blinder Bar fixture is guaranteed against manufacturing defects
for the duration of one (1) year from the date of purchase.
This warranty does not cover the unit for evidence of physical shock or damage
caused by abuse or any use not in accordance with the operating conditions set
forth in the present user manual.
In addition, cosmetic defects caused by the normal wear and tear of the unit are
not covered under the warranty.
Any modification to the fixture will void the warranty. We cannot under any
circumstances be held liable for quality and conformity regarding the installation
of this product, which is the responsibility of the installer. the device and before
use, may be covered by the warranty.
The manufacturer is not responsible for any errors or omissions that may occur
in this document. All information contained in this manual is subject to change
without notice.