Invoxia NVX 610 User manual

Welcome
NVX 610

Welcome to the invoxia world !

4
Box contents
Bienvenue
NVX 610
This welcome bookletiPhone / iPod
adapters
Ethernet cable AC adapter
NVX 610 handset
and cable
Smart holder x 3 Tablets & iPhone 5
stand
NVX 610 base

5
Your invoxia phone
Designed and produced by invoxia, Paris
Secrecy mode
Adjust volume/Receive and End a call
Messages

6
Set up
Positioning
Place your phone near your network socket (and near your mains supply socket if you are using a mains power
adapter).
Connecting the base
This phone is powered by PoE (Power over Ethernet), if your network is compatible, or through your mains AC
100-240V supply.
1. The base is protected by a transparent lm. Please remove it.

7
2. Place the smart holder on the base. It will cleverly t in the right place (if the poles are magnetically repelled,
simply turn it around horizontally 180º).

8
3. Insert your iPhone/iPod adapter
To connect a dierent model, remove the adapter and insert another one.
4. Insert the tablet and iPhone 5 removable stand in the slots at the back of the base.

9
5. If you are using the mains supply, plug the mains power adapter into the back of the base and into an active
wall socket.
6. Plug one end of the Ethernet cable into the ETH connector at the back of the base and into your network
telephone socket.
USB
O/I
PWR
ETH

10
7. Connect your phone to your computer by attaching an Ethernet cable between the PC port at the back of the
base and the Ethernet port on your computer (cable not supplied).
8. Press the On/Off button at the back of the base.
PC
O/I
WR