inVue 950 Series User manual

Series 950
Handheld Installation

2 3
Read entire instruction guide before starting installation.
System Components
1. IR Puck
2. Handheld Sensor
3. Handheld Sensor Bracket (optional)
4. Puck Screw Mount Kit (optional)
5. 5V Power Supply
6. IR Key (not included)
System Overview
The Series 950 is designed to be a small, easy to use,
above counter system that provides alarming security,
pass through power and magnetic display for all smart-
phones.
IR Puck EC95000 EC95002
EC95001
Sensor EC95200 EC95206
EC95201 EC95208
EC95205 EC95209
Sensor Bracket (optional) EC95400 EC95401
Puck Screw Mount Kit (optional) EC95402
Power Supply PS512-US PS512-EU
PS512-AUS PS512-UK
System Components

4 5
PUCK INSTALLATION
Adhesive Mount (See page 5)
Screw Mount (See page 10)
PUCK INSTALLATION – ADHESIVE MOUNT

6 7
Remove tab to activate battery. Remove clear film from
adhesive.
2
5
10
20
30
CONTENTS: One pad saturated in 75%
Isopropyl Alcohol
DIRECTIONS: Apply topically as
needed to cleanse surface mounting area.
FOR EXTERNAL USE ONLY
KEEP OUT OF REACH OF
CHILDREN
KEEP AWAY FROM EYES
AND FIRE
Optional: Drill a 19 mm (0.75”) diameter hole in
display counter. Required: Wipe display counter
with alcohol wipe provided. Let it dry completely.
1
(Optional)

8 9
3Slide power cord through display counter. Press firmly
for at least 10 seconds.
4Plug InVue power supply into power cord and outlet.

10 11
5
10
20
30
CONTENTS: One pad saturated in 75%
Isopropyl Alcohol
DIRECTIONS: Apply topically as
needed to cleanse surface mounting area.
FOR EXTERNAL USE ONLY
KEEP OUT OF REACH OF
CHILDREN
KEEP AWAY FROM EYES
AND FIRE
Drill a 19 mm (0.75”) diameter hole in display
counter. Wipe display counter with alcohol wipe
provided. Let it dry completely.
1
PUCK INSTALLATION – SCREW MOUNT

12 13
32 Remove screw and turn door to left with flat head
screwdriver to remove existing battery door.
Remove tab to activate battery. Remove adhesive to
access battery door screw.

14 15
4Place new battery door on bottom of puck and turn
door to right with flat head screwdriver. Place screw in
battery door and tighten.
5Place new adhesive onto bottom of puck. Insert and
tighten threaded metal rod onto new battery door.

16 17
6Remove clear film from adhesive. Slide power cord through display counter. Press firmly
for at least 10 seconds. Slide washer through threaded
metal rod and cord and tighten wingnut below counter.
7

18 19
8Plug InVue power supply into power cord and
outlet.
ATTACHING MERCHANDISE

20 21
Wipe back of phone with alcohol wipe provided. Let it
dry completely.
1
CONTENTS: One pad saturated in
Isopropyl Alcohol
75%
DIRECTIONS: Apply topically as
needed to cleanse surface mounting area.
FOR EXTERNAL USE ONLY
KEEP OUT OF REACH OF
CHILDREN
KEEP AWAY FROM EYES
AND FIRE
Plug power connector into phone.
2

22 23
3Remove clear film off adhesive on sensor. Confirm
sensor cord is towards top of phone. Center and
attach merchandise to sensor. Press firmly for at
least 10 seconds.
Sensor Cord
(Optional: If using arms): Loosen sensor with T-20 bit
to attach arms. Attach both arms to sensor.
4a

24 25
4bConfirm arms are fitted to width of merchandise.
Squeeze both arms against merchandise and tighten
screw with T-20 bit to lock arms in sensor. Confirm
arms are placed onto sensor correctly.
4c(Optional: If using arms): Adjust arms to thickness of
merchandise and tighten screw with T-20 bit. Do not
overtighten.

26 27
5Plug sensor cord into puck and place sensor onto
puck.
Arm/Disarm Alarm
Place key on lens of puck.
Press button on key once to
arm and disarm alarm.

© 2013 InVue Security Products Inc. All rights reserved.
InVue is a registered trademark of InVue Security Products.
SD0174 Rev0 09/03/13
www.invuesecurity.com
Corporate Office (North America) // 704.752.6513 •888.55.INVUE
Europe, Middle East & Africa // +31.23.8900150
Asia Pacific // +852.3127.6811
Latin America // +52.55.9000.3957