iO Portable Air heater Installation instructions

1. Read the manufacturer's instructions and warning labels
before using any portable electric air heoter product.
2. Keep flammable materials away from heoter.
3. Unless heater is designed for use outdoors or inbathrooms,
DO NOT use in these areas. Parts in the heater may be
damaged by moisture.
A fire or shock hazard may result.
4. Check periodically for secure plug/outlet fit. If the plug
does not fit snugly into the outlet or
if the plug becomes
very hot, the outlet may needto be replaced. Check with a
qualified repairmanto replace outlet.

5. Unplu heater when not beingused by pulling straight out
from !e outlet, not by pulling on the plug at an angle or
on the heater's cord. Inspect the cord periodically.
DO NOT use heater with a damaged cord. Check with
qualified repairman to replace cord.
6. Keep heater at least three feet away from objects such as
curtains, bedding, furniture, etc.
DO NOT block heaterair
intakeor exhaust.
_Assotiationof Home Appliance Manufacturers
1111 19thStreet NW, Suite 402
- ' - -
Washington, D( 20036

7. Place heater on a level, flat surface. DO NOT place
heaters on furniture, since they may fall, dislodging or
breokina Darts inthe heater. This could result ina fire or
9. String out cords on top of rugs or floors. Placing anything
on top of the cord may damage it.
shock hGard.
-
8. Heaters should be kept away from children and not be
placedina child's room without supervision.
I
I
10. DO NOT use an extension cord unless absolutel
necessary. Using an improper extension cord with
hi
wattage appliances may cause overheating of t I! e
extensioncord.
If you must use an extensioncord, itmust
be marked "12-gauge" or "14-gauge" (the smaller the
number, the larger the size of the wire).
--
Brought lo you by AHAM.
I
This brochure is sponsored by AHAM and it's Portable Air Heater Manufacturers.
Visit our website ~yww.ohorn.orglor rnoredorplolioponportoble electric oir hIr
'iditionol topies ton be obtained by tolling AHAM at [phone].
I