IOGear GUH203C User manual

Read this guide thoroughly and follow the installation and operation procedures carefully to
prevent any damage to the unit and/or any of devices it connects to:
This package contains:
• 1 USB 2.0 2-port PCI Card
• 1 USB 2.0 3-port 5.25in/3.5in internal hub
• 1 Installation CD
• 1 User Manual
• 1 Warranty /Registration Card
© 2002 IOGEAR®. All Rights Reserved.
All brand names and trademarks are the registered property of their respective owners.
PKG-M0019
GUH203C USER MANUAL
USB 2.0 PCI Card/MiniHub™ Internal Hub Kit
5. Specifications
1. Welcome
Thank you for purchasing IOGEAR's USB PDA/Serial Adapter. IOGEAR brings cutting edge
technology of USB to your Macintosh and PC. You will enjoy the convenience and newfound
speed that has made this technology an industry standard.
Note:
Your order has been carefully packaged and inspected, and we hope you are pleased with the
IOGEAR product you purchased. Please inspect the contents of the package to ensure that you
have received all items and that nothing has been damaged. If you discover a problem, please
contact your dealer immediately for assistance.
Contact Information:
(P) 949-453-8782 (F) 949-453-8785
23 Hubble Drive, Irvine, CA 92618 USA
www.iogear.com
[email protected]
2. Hardware Requirements and Features
• Windows 98SE, 2000, ME, XP
• Available PCI slot
• Available 5.25in. or 3.5in. drive bay
• Product Features
1) 40 Times Faster Then The Original USB
2) Supports High Speed Data Transfer Rates up to 480 Mbps
3) Fully Backward Compatible With USB 1.1
4) Supports Windows® 98SE, 2000, ME,XP
5) 5 external USB Type A Ports
6) Hot Swappable -Plug-N-Play
7) PC Power Management v2.2 Compliant
8) 3-Year Limited Warranty
3. Installation of PCI Card
Hardware Installation
! Please take all proper Electro Static Discharge (ESD) precautions during the installation of your
new hardware.
• Installing the IOGEAR USB 2.0 PCI Card
a) Shut down your computer and turn off the power
b) Open your computer case as described within your computer's user's manual
c) Locate an available PCI slot
d) Per your computer's manual, install the USB 2.0 PCI Card into the available PCI slot
e) Close up your computer and plug in all necessary cables
Software Installation
a) Upon rebooting your computer with the IOGEAR USB 2.0 PCI Card for the first time,
Windows® will automatically detect your new hardware and a dialog window will appear
entitled "New Hardware Found"
b) Follow the installation instructions on the screen to its entirety
c) Once completed, restart your computer to take full advantage of your new IOGEAR USB 2.0
PCI Card
4. Installation of Internal Hub
Hardware Installation
! Please take all proper Electro Static Discharge (ESD) precautions during the installation of your
new hardware.
• Installing the IOGEAR USB 2.0 Internal Hub
a) Shut down your computer and turn off the power
b) Open your computer case as necessary as described within your computer's user's manual
c) Locate an available 5.25 in. or 3.5 in. drive bay
d) Remove necessary screws
e) Insert internal USB 2.0 hub into available drive bay
f) Secure internal hub into drive bay using two screws on each side
g) Connect the cable from the internal hub to the connector on the USB 2.0 PCI card
h) Close up you computer case and reinstall necessary screws
i) Power up computer and make new connections to the ports • Radio & TV Interference
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation
IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY EXCEED THE PRICE PAID FOR
THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK. OR IT'S
DOCUMENTATION.
The direct vendor makes no warranty or representation, expressed, implied, or statutory with
respect to the contents or use of this documentation, and especially disclaims its quality,
performance, merchantability, or fitness for any particular purpose.
The direct vendor also reserves the right to revise or update the device or documentation
without obligation to notify any individual or entity of such revisions, or update. For further
inquiries, please contact your direct vendor.
Function
Specifications
Ports
External
5
Power Mode
Self (Bus) Powered
Output voltage (per port)
+5V DC
Output Current (per port)
500mA (max.)
Operating Temperature
5 - 40° C (41-104° F)
Storage Temperature
-20 - 60° C (-4-140° F)
Humidity
0 – 80% RH