Ion Energy Solutions M54120 User manual

Page 1
Ion Energy Solutions
The Most Powerful Utility Data in the World in MultiFamily
Ion Energy Solutions
[phone] - Louisville Kentucky
www.ionenergysolutions.com
M54120 Battery Water Meter User Guide
The M54120 battery powered water meter collects data for water usage in an apartment. There are
point of use applications or main feed applications that the M54120 battery powered water is used
for.
Step 1: Locate the plumbing assembly.
Step 2: The plumbing assembly has a ow sensor the M54120 battery powered water meter gets
attached too.
Battery powered
water meter
Flow sensor
Serial number
sticker
Baby board
Step 3: Magnet the M54120 water meter to get it to join the network on the property. This is required!
A successful network join would be indicated by 4 green LED blinks. Remove the serial number sticker
located on the water meter, pictured above. Place the serial number sticker on the sticker sheet
supplied by ION in the correct place such as the apartment for which it is located in and in the correct
device column.
The rubber band around the water
meter is there to ensure the baby board
does not come out during delivery or
before the install!! The baby board is a
critical part !!!
!

Page 2
Ion Energy Solutions
The Most Powerful Utility Data in the World in MultiFamily
Ion Energy Solutions
[phone] - Louisville Kentucky
www.ionenergysolutions.com
Step 4: Attach the M54120 water meter to the ow sensor on the plumbing assembly. The M54120
water meter can only go onto the ow sensor in one direction. The nipple on the ow sensor goes into
the nipple gap on the M54120 water meter.
Step 5: There is a black clip that holds the M54120 water meter to the ow sensor. When the water
meter is seated properly to the ow sensor secure with the black clip.
There will be two click sounds made by the water meter clip when properly put on.
The battery powered water meter can
only go on the ow sensor one way!
If the battery water meter is not on
correctly, the water won’t seat onto
the ow sensor properly!! Check the
plumbing assembly to ensure there
are no leaks!!!
!
Nipple on ow
sensor
Nipple gap on battery
powered water meter
Squeeze the black clips
ends until you hear a click
sound from each side of
the clip
Black clip