ION Exchange Zero B User manual

1
User Manual
50 LPH RO SKID
ION EXCHANGE (INDIA) LTD.
Ion House, Dr. E. Moses Road,
Mahalaxmi, Mumbai-400011

2
Technical Specifications of RO 50 LPH
Reverse Osmosis water purifier with up to 50 Liters per hour purification
capacity
Reverse osmosis system designed to deliver up to 50 liters of purified water per hour
through a 6 stage purification process. Its membrane have a pore size of 0.0001
micron size which prevents the passage of micro organisms and total dissolved salts
making the water lighter, taste natural and safe to drink.
Specification
Dimension in mm W*D*H
470*490*860
Net Weight in Kg. (Approx.)
32 kgs
Gross Weight in Kg. (Approx.)
62 kgs
Reservoir Capacity
Not Provided
Production Capacity
50 LPH
RO Membrane (Thin Film Composite)
80 GPD*4 Nos.
Power Consumption
120 W
Input Power Rating
230 V AC,50 Hz
System Operating Voltage
48 V DC
Operating Temperature
5 TO 45 °C
% Of Recovery of Purifier Water
25 %
% Of Rejection in TDS
90 % (min.)
RO Membrane Flushing
Auto Flush @ Every Start, every stop and
every one hour of working for 1 minute
Stages of Filtration
Particulate FilterMembrane Life
Enhancer FilterSediment FilterPre-
carbon FilterR.O.Membrane FilterPost
Carbon Filter

3
Water Flow Schematic

4
TECHNICAL SPECIFICATION FOR RO SYSTEM
The RO water purifier units have 6 purifier stages in a CRCA steel skid frame
powder coated for corrosion protection.
Stage 1: Particulate Filter
Size : 2.5” Dia 20” Height
MOC of Cartridge : PP Yarn
Nominal rating of Cartridge : 10 microns
Qty : : 1 No
Stage 2: Membrane Life Enhancer Filter
Size : 2.5” Dia 10” Height
Weight of Content : 250Gms of Membrane Anti-scalent
Qty : 1 No
Stage 3: Sediment Filter
Size : 2.5” Dia 20” Height
Cartridge : PP Yarn
Nominal rating : 10 microns
Qty : 1 No
Stage 4: Pre Carbon filter
Size : 2.5” Dia 20” Height
Type : Carbon Block
Qty : 1 No
Stage 5: RO Membrane Filter
Type : Membranes 80 GPD X 4 in concealed housing.
Salt rejection% : 90% or more, which effectively removes input
TDS, Chemical Impurities, bacteria and Virus.
Qty : 4 Nos
Stage 6: Post Carbon Filter
Type : Carbon Block
Size : 2.5: Dia 20” Height
Qty : 1 No

5
Front View
Stage 1:
Particulate
filter
Inlet Water
Stage 3:
Sediment
filter
Stage 4:
Pre carbon
filter

6
Stage 6:
Post Carbon
filter
Stage 5: RO
Membrane filter
Booster Pumps 2 nos
driven by 48V DC
Stage 2:
Membrane Life
Enhancer Filter
Auto Flush
Timer Valve
Tank level
control valve

7
Stage 2:
Membrane Life
Enhancer Filter
Rejected
water out
Flow Restrictor
1.2 mm here
Flow Restrictor
0.5 mm here

8
***Note: 1. Preferably Install electrical float switch (NC Type) for tank level
control OR
Install HP switch in the output permeate water line, adjust at switch OFF
pressure between 1.5~ 2 kg.
2. Insist on installing NRV (non returnable valve) in the permeate line before the
HP Switch.
3. Use Ion Exchange (ZERO B) genuine spare parts only.
4. Allow only ZERO B authorized persons to service this machine.
5. Insist on cleaning the Flow restrictors during the servicing the machine.
***NOTE: Remove this short wire and connect
Electrical float switch (NC -normally closed)
OR connect HP Switch (NC -normally closed)