IOT-Smart Solutions KBD-5820 User manual

1
KBD-5820
Intelligent Keyboard Controller
User Manual

Intelligent keyboard Controller Installation user manual
Content
1. Keyboard introduction ...............................................................................................................2
1.1 Keyboard main features ......................................................................................................2
1.2 Keyboard layout..................................................................................................................2
1.3 Technical data......................................................................................................................3
2. Keyboard installation.................................................................................................................5
2.1 The back view .....................................................................................................................5
2.2 Installation...........................................................................................................................5
3. Keyboard Setting........................................................................................................................7
3.1 General Introduction ...........................................................................................................7
3.2 Keyboard Setting log-in......................................................................................................7
3.3 Keyboard Setting.................................................................................................................7
4. Direct Control............................................................................................................................14
4.1 Direct control Log-in.........................................................................................................14
4.2 Direct control menu...........................................................................................................14
4.3 switch camera....................................................................................................................14
4.4 Direct Cam Control...........................................................................................................15
5. Standalone DVR Control.........................................................................................................18
5.1 log onto DVR....................................................................................................................18
5.2 DVR Control Window.......................................................................................................18
1

Intelligent keyboard Controller Installation user manual
1. Keyboard introduction
Intelligent network keyboard is designed to directly control high speed / low speed dome
camera，PTZ camera, standalone DVR and matrix switcher.
1.1 Keyboard main features
3-Axis joystick, position exactly
Meticulous LCD, operate help information plentiful and real-time
Silica gel keystroke back light subarea display, durable for using.
Support self-inspection of joystick/keyboard/LCD/port
1.2 Keyboard layout
【figure 1-1 keyboard layout】
①LCD
②Main board
Orange Backlight
【0】…【9】： Figure
【F1】…【F5】：Shortcut button
【CANCEL】： Cancel
【ENTER】： Confirmation key
【PREV】： Switch to last dome; move the cursor upward on menu
【NEXT】： Switch to next dome; move the cursor downward on menu
【PRESET】： Function key for preset position
【LOCK】： Lock
【SITE】： Choose a device
【MACRO】： Macro function key
2
Two wires of RS-485 port can control multi-domes.

Intelligent keyboard Controller Installation user manual
【ALARM】： Disalarm function key
【ARM】： Arm/Disarm function key
【PGM】： Program key
【SHIFT】： Combination key
【MON】： Monitor switching key
【CAM】： Camera switching key
③Lens control key
A：Iris close B: Iris open
C：Focus near D：Focus far
E：Zoom out F: Zoom in
Three④-dimensional Joystick
【figure 1-2 Lens control keys】
1.3 Technical data
operating temperature：-10℃～50℃
operating humidity：<90%
operating voltage：DC12V
power consumption：5W
Ethernet port: 10Base-T UDP
dimensions（mm）： 345×175×98（length × width× height）
3

Intelligent keyboard Controller Installation user manual
【figure 1-3 keyboard dimension】
4

Intelligent keyboard Controller Installation user manual
2. Keyboard installation
2.1 The back view
【figure 2-1 keyboard back panel】
MINI USB①：Program upgrade USB
RS②-485: Two lines of RS-485 control, for connecting PTZ and DVR
Dip switch③：Reserved for further use
RS④-232：Reserved for further use
Network conne⑤ction: for connecting matrix switcher
Power input⑥：DC12V/1000mA
Power switch⑦
2.2 Installation
5

Intelligent keyboard Controller Installation user manual
2.2.1 PTZ Control
Connect RS-485 port on the keyboard with RS-485 port on camera. (two equipment
A/B/G separately connect) ，connect and power on keyboard. In log-in menu, select direct
control, input keyboard ID and password, and it’s done. Before log-in, user needs to add
direct control device to keyboard in keyboard setting menu, .
Quick guidance:
1. Enter keyboard setting menu, input keyboard ID and password ，
defaultpassword“000000”，add direct control device to keyboard and also set the
correct protocol and baud rate.
2. In log-in menu, select direct control and input keyboard ID (default 1) and password
(default 000000) to enter direct control window.
3. In direct control window, input camera ID, press【CAM】to confirm or change the
current ID.
4. Use joystick and lens control keys to control the up, down, left, right and zoom of
speed dome camera.
2.2.3 Standalone DVR Control
Intelligent keyboard controller can control popular standalone DVR. Connect DVR to
RS-485port on keyboard. Power on keyboard and switch on it. After keyboard screen
displays log-in menu, select DVR device, input keyboard ID and password. Before
log-in, user needs to add DVR to keyboard through keyboard setting menu. Also user
needs to set the keyboard ID for controlling DVR in keyboard setting menu.
Quick guidance:
1. Enter keyboard setting menu, in keyboard attribute, add DVR to keyboard, set
keyboard ID for controlling DVR.
2. Enter keyboard log-in menu, select DVR ID number, input keyboard ID(default 1) and
password (default 000000)to enter DVR control menu.
3. In DVR control menu, user can control DVR. Press【Iris Off】to switch to PTZ control
mode. In PTZ control mode, user can control PTZ camera. Press【CANCEL】to go
back to DVR control mode.
6

Intelligent keyboard Controller Installation user manual
3. Keyboard Setting
3.1 General Introduction
If this is the first time that you use intelligent keyboard controller, please read this
chapter carefully. This chapter will guide you to set the network attribute, control device
attribute, hardware function and complete hardware testing.
The soft keys on keyboard screen corresponds with shortcut key buttons on keyboard
【F1】～【 F5】. Press shortcut button to use soft key function. < > represents soft key in
this manual.
3.2 Keyboard Setting log-in
Power on keyboard while holding 【PGM】，keyboard will enter its setting window. Input
user ID and password to log in. This keyboard support 4 user ID（user ID are 1、2、3、
4），password is six digits, default password000000.
Keyboard setting
user 1 password ******
【figure 3-1 keyboard setting log-in 】
3.3 Keyboard Setting
In keyboard setting window, user can modify network parameters such as keyboard
IP address and subnet mask code, as well as relevant attributes of control device,
adjust backlight and key tone, test key buttons and joystick.
network device kbd test exit
Keyboard function setting
【figure 3-2 keyboard function setting】
3.3.1 Network Attributes Setting
Press soft key <network> to enter network attributes setting. Set keyboard IP address,
subnet mask code, network gate and MAC address.
7

Intelligent keyboard Controller Installation user manual
【figure 3-3 keyboard network attributes setting】
Press corresponding soft key to enter modification. Input numbers to change 按values.
Press【PREV】to move forward, press【NEXT】、【ENTER】to move backward. Press <exit>
to return.
【figure 3-4 set keyboard network attributes】
After modification, press<save>，keyboard pops up a hint. Press【ENTER】<exit>to
return.
【figure 3-5 save keyboard network attributes】
3.3.2 Device Attributes Setting
In keyboard function setting menu (see figure 3-2), press<device> to enter device
attributes setting.
Each keyboard supports 10 devices at the maximum（device ID is 1-10）. Devices are
divided into four types:“no device”、“matrix”、“direct control”、“DVR”.
Input ID number in Device, press【ENTER】to confirm.
Network attributes setting
IP mask gate MAC exit
Network attributes setting
IP address
10 .10 .10 .80
save exit
Network attributes setting
save exit
Save success
Device 1
type no device
exit
Device attributes setting
8

Intelligent keyboard Controller Installation user manual
【figure 3-6 Device attributes setting】
In type selection box, press【PREV】、【NEXT】to select control devices，press
【ENTER】to confirm, then it enters the device attribute setting menu for the selected
device.
【figure 3-7 select device type】
After select matrix, it enters matrix attribute setting menu. Set matrix IP address, and
press <save> to save setting.
【figure 3-8 set matrix network attribute】
After select direct control, it enters pan/tilt attribute setting menu. 需要 Set
communication protocol and baud rate. Press【PREV】、【NEXT】to select communication
protocol and baud rate. Press【ENTER】to move cursor to baud rate selection box. Press
【CANCEL】to move cursor to communication protocol selection box. Press <save> to
save settings.
Communication protocol for selection: TPELCOP（relates to PelcoP）、TPELCOD
（relates to PelcoD）.
Baud rate for selection: 2400bps、4800bps、9600bps、19200bps.
【figure 3-9 set pan/tilt direct control attribute】
After select DVR, it enters DVR attributes setting menu. Set an keyboard ID for
controlling DVR（range 1-16）. Press <save> to save settings.
Device attributes setting
DVR port RS485
DVR KBD ID 1
save exit
Device attributes setting
Direct control port RS485
Protocol TPELCOP baud rate 9600
save exit
Device 1
Type matrix
exit
Device attributes setting
Matrix IP address
10 .10 .10 .50
save exit
Device attributes setting
【figure 3-10 set DVR keyboard ID】
9

Intelligent keyboard Controller Installation user manual
After select “no device”, press【ENTER】to confirm. After saving setting, the current ID is
set to be occupied by no device.
【figure 3-11 device type set to be “no device”】
3.3.3 Keyboard Attributes Setting
In keyboard function setting menu（see figure 3-2），press <keyboard> to enter keyboard
attribute setting menu.
【figure 3-12 keyboard attribute setting】
Modify user password
Press<password> to enter keyboard user password modification menu.
Input user ID（keyboard supports 4 user ID，range 1-4），press 【ENTER】to 键将 move
cursor to password input box. Input original password, after verification, input new
password twice.
exit
Password modification
user 1 password
new password confirm
eixt
keyboard attribute setting
password delay hardware language exit
Save complete
Device attributes setting
【figure 3-13 Password modification】
Backlight delay, lock delay
Press soft key <delay> to enter.
Backlight delay: delay time 1-60 minutes，set 0 to remain on.
Lock delay: keyboard will be locked after a period if no operation is executed. Delay
time 1-60 minutes，set 0 to remain unlocked. No password is needed to unlock the
keyboard.
Press <save> to save settings.
10

Intelligent keyboard Controller Installation user manual
【figure 3-14 Delay function setting】
LCD contras, key tone
Press <hardware> to enter hardware setting menu.
Keyboard LCD contrast range 1-7.
Key tone can be turned on or off by pressing 【NEXT】、【PREV】.
Press <save> to save settings.
【figure 3-15 keyboard hardware setting】
Language Selection
Press <language> to enter language selection menu.
Keyboard support two languages: Chinese and English, press【NEXT】、【PREV】to
choose language.
Press <save> to save settings.
【figure 3-16 Language selection】
3.3.4 Keyboard Testing Function
In keyboard function setting menu（see figure 3-2），press<test> to enter keyboard
function testing menu.
Keyboard function testing
key joystick exit
出
Language selection
language English
save exit
Hardware setting
LCD contrast 4
Key tone off
save exit
backlight 5
lock 5
save exit
Delay function setting
【figure 3-17 keyboard function testing】
11

Intelligent keyboard Controller Installation user manual
Key button testing
Press <key> to enter key button testing menu.
In key button testing menu, press key buttons on keyboard, the corresponding 在name
will be shown in the box. This is to test the function of key buttons.
【figure 3-18 keyboard testing】
Joystick Calibration
Press <joystick> to enter joystick testing menu.
【figure 3-19 joystick testing】
Center value: enter joystick center value setting menu, release joystick to let it
resume to center position, press <set> to set the center value.
【figure 3-20 Joystick center value setting】
Max value：Enter max value setting menu, move joystick up, down, left and right to
its maximum on after another, meanwhile, press <set> to set the max
value for this direction.
Joystick max value setting
571
511 723 731 591
set 559 exit
Joystick center value setting
498 504 491
set exit
Joystick testing
center max blind exit
Key test（SHIFT+CANCEL exit）
SHIFT through（SHIFT+1）to test
Key button testing
【figure 3-21 Joystick max value setting】
Blind area: Enter joystick blind area setting menu, input blind area value range
（20-60）. Default blind area is suggested to be around 25. As time go on,
accuracy of components will change, user may increase blind area
accordingly.
12

Intelligent keyboard Controller Installation user manual
【figure 3-22 Joystick blind area setting】
Please make sure to calibrate the center value before setting max values. Otherwise,
the max value will not be correct.
3.3.5 Setting complete
After the completion of keyboard function setting, user needs to reboot the keyboard.
Keyboard function setting
network 设备 键盘 测试 exit
Setting complete, please reboot
Joystick blind area setting
Blind area range（20-60）
Blind area 25
set exit
【figure 3-23 keyboard reboot】
13

Intelligent keyboard Controller Installation user manual
4. Direct Control
In order to control RS-485 PTZ，user needs to add direct control device in keyboard
setting menu—device attributes, and set the correct communication protocol and baud
rate.
4.1 Direct control Log-in
System control keyboard
device01 direct control
【figure 5-1 keyboard log-in device menu】
After power on, it displays log-in menu. Input device ID, press【ENTER】to enter the
following menu:
System control keyboard
Device 01 direct control
User 01 password
【figure 5-2 keyboard log-in to direct control】
Input keyboard ID, press【ENTER】，input correct password and press enter to 输enter
direct control menu.
note：default keyboard password: 000000.
4.2 Direct control menu
Number input
Direct control device 1 user 1
Cam 1 TPELCOP/9600
12345
scan track tour menu close
Description for current device
Current cam No. protocol and baud rate
Info tips
Soft keys
【figure 5-3 direct control menu】
4.3 switch camera
Keyboard supports three ways of switching.（camera address range 1-256）：
1、Input camera ID，press【CAM】
2、Input camera ID，press【ENTER】
14

Intelligent keyboard Controller Installation user manual
3、press【PREV】/【NEXT】to switch back and forth.
4.4 Direct Cam Control
Intelligent keyboard controller is able to execute the main functions of speed dome/
PTZ receiver.
1、PTZ control: move joystick up and down, left and right, to control the
movements of pan/tilt. Speed is divided into 0～63 steps，LCD screen will
display the value of movements. Use the lens keys to control zoom, focus and
zoom.
2、Preset operation: select camera ID, press any number, and press【PRESET】
to call the preset position, preset number range 1～255. press any number and
press【SHIFT】+【PRESET】to edit the preset position.
Aux switch: open/close the aux switch of the PTZ receiver, each receiver
supports 8 aux switch, needs special protocol.
Stop：press any number, press【SHIFT】+<shut>.
3、Auto scan operation: press any number, press <scan> to call it. Total 8 auto
scan（number 1-8）. Press <scan> to enter auto scan settings.
【figure 5-4 Auto scan setting】
Modify auto scan NO.：press number, and press【ENTER】
Set left limit：move speed dome to the position, press <left limit>
Set right limit：move speed dome to the position, press <right limit>
Set scan speed：press number, press <speed>（range 1-30）.
4、Auto Scan Operation：Press number buttons first，and then<Scan> button to
call. 8 pcs of auto scan（Series number 1-8）are supported, and press
<Scan> button to enter the auto scan setup menu.
【Fig 5-4 Auto Scan Setup】
Change auto scan series number：Press number button first，and then
【ENTER】。
Set auto scan left boundary：Move the joy stick to control speed dome to the
position，and press <left boundary> button。
Set auto scan right boundary：Move the joy stick to control speed dome to the
Auto scan setting
scan 1
left limit right limit speed exit
Auto scan setting
scan 1
left limit right limit speed exit
15

Intelligent keyboard Controller Installation user manual
position，and press <right boundary> button。
Set auto scan speed：Press number button first，and then<Speed> button
（Value 1-30）。
5、Auto cruising operation：press number first，and then <Cruising> button to call.
8 cruising (Series Number 1-8）are supported。Press <Crusing> button to
enter auto cruising setup menu。
【Fig 5-5 Auto Cruising Setup】
Change auto Cruising number：Press number button and then【ENTER】button。
Set cruising point interval：Press number button，and then <Interval> button
（Value 1-60）。
Add cruising point：Press <Add> button to enter the cruising point add menu。
【Fig 5-6 Add Cruising point】
In the cruising point menu，input preset point number for each cruising
point by sequence（Number 1-255）。Press【NEXT】/【ENTER】button to move
the arrow focus to next cruising point，and press【PREV】to move the arrow
to the previous cruising point. Press <Setup> button after setting all the
cruising points，and the sequence information will be save in the speed dome
camera.
6、Pattern Tour Operation: First press number key then press <tour> can be call.
It supports 8 tracks pattern tour. Push <tour> to the setting screen of pattern
tour.
Pattern tour setting
tour 1
Begin Finish Exit
Add cruising point
. . . . . .
. . . . . .
set exit
Auto Cruising Setup
cruise 1
add interval exit
【5-7 Pattern tour setting】
Change the number of pattern tour: First press number key then press
【ENTER】Setup pattern tour: press <start> enable pattern tour record then operate
joystick in order to let speed dome work with excepting tour that can be
16

Intelligent keyboard Controller Installation user manual
memorized automatically. After finish setting, please release joystick and press
< finish > close setting of pattern tour.
7、Open OSD Menu Operation：
Press <Menu> to open speed dome setup menu
8、Re-log Operation:
Press 【SHIFT】+【CANCEL】to exit main interface of camera direct control.
Note: Auto scan, auto cruising, pattern tour, and open OSD menu
need special protocol support.
17

Intelligent keyboard Controller Installation user manual
5. Standalone DVR Control
In order to control standalone DVR, user needs to add DVR to keyboard through
setting menu, and register a keyboard ID for controlling DVR. Connect power to the
keyboard, press 【PGM】, and switch on the keyboard while holding 【PGM】, the
keyboard will log into setting menu. In the setting menu, add the DVR ID into the
keyboard and set a keyboard ID for controlling DVR. After the completion of above
settings, please shut down the keyboard and power on again. After logging in, choose
device 3 to enter DVR control mode. In the DVR control mode, please press 【SITE】,
and input the DVR ID. After that, user will be able to control DVR through keyboard.（for
the functions of DVR, please refer to DVR user’s manual）.
5.1 log onto DVR
System control keyboard
Device 01 DVR
【Picture 6-1 log onto DVR】
Power on the keyboard, input ID and password in log-in window, press【ENTER】to
enter the following window：
System control keyboard
Device 01 DVR
User 01 password
【Picture 6-2 keyboard log-in DVR window】
Input keyboard user ID and press【ENTER】, then input password and press【ENTER】
to enter DVR control window.
Note：Default in-factory password for keyboard is 000000.
5.2 DVR Control Window
DVR keyboard 1 device 1 user 1
NO. 1 MODE DVR
KEY1
F1 F2 play record shut
Description for current device, device NO.
DVR camera NO. Current control mode
Key tips
Soft key
【Picture 6-3 DVR control mode window】
18

Intelligent keyboard Controller Installation user manual
DVR keyboard 1 device 1 user 1
NO. 1 MODE DVRPTZ
KEY1
F1 F2 auto preset shut
Description for current device, device NO.
Soft key
Key tips
DVR camera NO. Current control mode
【Picture 6-4 Pan/Tilt control mode window】
5.2.1 DVR Control
After keyboard loging into DVR, it enters DVR control mode (it displays MODE
DVR ), and is able to set and control DVR menu and functions. Under DVR control mode,
press【iris off】, it will switch to pan/tilt control mode. Input password（password for logging
into keyboard）and press【ENTER】to enter pan/tilt control mode（it displays MODE
DVRPTZ）. Under pan/tilt control mode, keyboard is able to control PTZ movements.
Press【CANCEL】to go back to DVR control mode.
Function description for keys on keyboard：Function keys on keyboard that are
related to DVR control are basically the same with those on DVR front panel, some keys
are soft keys.
【0】～【9】： Number keys
【F1】： Lighting control key
【F2】： aux device control key
【F3】DVR mode：<play>key；pan/tilt control mode：<auto>key
【F4】DVR mode：<record>key；pan/tilt control mode：<preset>key
【F5】shut down
【CANCEL】： cancel
【ENTER】： confirm
【PREV】： multi-screen key：1、switch to multi-screen in preview window；2、
switch from menu mode to preview window
【NEXT】： Undefined
【PRESET】： DVR mode：<record>key；pan/tilt control mode：<preset>key
【LOCK】： Lock/unlock
【SITE】： DVR device selection key, able to control multi DVRs
【MACRO】： Undefined
【ALARM】： Undefined
【ARM】： Undefined
【PGM】： Menu key
【SHIFT】： Combination key
【MON】： Undefined
【CAM】： Undefined
【zoom in】: DVR mode：system information key；pan/tilt control mode：Zoom in
【zoom out】: DVR mode：talk key；pan/tilt control mode：Zoom out
【focus in】: DVR mode：input method key；pan/tilt control mode：Focus in
【focus out】: DVR mode：multi-screen key；pan/tilt control mode：Focus out
【iris on】:DVR mode：edit key；pan/tilt control mode：Lens iris on
【iris off】:DVR mode：pan/tilt control key；pan/tilt control mode：Lens iris off
19