IOT-Smart Solutions MKB02 User manual

MKB02
Mini Mobile PTZ Keyboard Controller
User Manual
http://iotsmartsolutions.net

Safety Notes
Thank you for choosing our mini keyboard controller!
When you open the box:
1. Check that the packing and the contents are not visibly damaged. Contact the retailer
immediately if any parts are either missing or damaged.
2. Make sure if the contents are all included as per the packing list.
3. Do not attempt to use the device with missing or damaged parts. Send the product back in its
original packing if it is damaged.
[Note] The information contained in the document is subject to change without notice.

Table of Contents
About The Product...............................................................................................1
Introduction ...............................................................................................................1
Features ....................................................................................................................1
Technical Data..........................................................................................................1
Parts And View.........................................................................................................2
Connections ..............................................................................................................4
operation................................................................................................................6
Menu Operation........................................................................................................6
Camera Setting ........................................................................................................7
Time Setting..............................................................................................................9
Volume Setting .........................................................................................................9
Backlight Setting ....................................................................................................10
Sleep Setting ..........................................................................................................10
Pin Setting...............................................................................................................11
Joystick Calib..........................................................................................................13
Key Custom ............................................................................................................14
Speed Setting .........................................................................................................16
Default Setting ........................................................................................................16

Safety Notice---Important!!!
The following important notes must be followed carefully to run the controller and respective
accessories in total safety.
 Power shall be cut immediately when the controller is not working correctly;
 Use DC12V power supply. Wrong power supply may damage the controller;
 To prevent electric shock, do not remove screws or covers of the camera. There are no
self-serviceable parts inside. Refer to qualified service personnel for servicing.
 Do not operate the camera beyond the specified temperature and humidity.

1
About The Product
Introduction
The mini keyboard controller is a full-function system keyboard. With features of ergonomic
design, multi-function, high reliability and easy operation, it is a perfect controller for rugged PTZ
cameras, video conference cameras, surveillance cameras and so on.
Features
4D joystick for pan/tilt/zoom/focus control, ergonomic design and excellent finishing;
High brightness OLED display;
Auto backlight keys;
Shortcut keys customization;
Batch program cameras in the systems;
Multi-level protection from illegal operation or setting;
Multi-baud rate and protocols;
256 address;
Compact design with portable features;
Technical Data
Comm. Interface
RS-485/RS-232
Protocol
Pelco-D, Pelco-P, VISCA
Baud Rate
2400bps, 4800bps, 9600bps, 19200bps, 38400bps
Address
0~255
Joystick
4-axis (Left/Right, Up /Down, Zoom In/Zoom Out, Focus
Near / Focus Far)
Display
OLED
Power
DC12V
Power Consumption
<2W
Working Temperature
0℃~40℃
Storage Temperature
-20℃~+50℃
Relative Humidity
≤90% (non-condensation)
Dimensions
200mm(L)*120mm(W)*103mm(H)
Net Weight
0.5kg

2
About The Product
Parts and view
① OLED screen
The OLED screen displays status of current
operation.
② CALL (Call preset)
Input preset number, then press CALL key to
call a preset
③ CAMERA (Switch cameras)
Input camera number, then press CAMERA
key to switch to another camera.
④ SET (Set / Clear preset)
Input preset number, then press SET key to
set or delete a preset (Short press to “set”;
long press to “clear”).
⑤ SETUP (Enter setup menu)
Press SETUP key to enter menu and program
the keyboard
⑥ CRUISE (Auto Cruise)
Press CRUISE key to do auto cruise.
⑦ PATTERN (Pattern Scan)
Press PATTERN key to do pattern scan
⑧ F1, F2 (Reserved )
These keys are reserved.
⑨ SHIFT (Extension key)
It is an extension key to be used with other
keys for special functions.
⑩ ESC (Exit / Delete)
It is a key to EXIT in a menu or DELETE in
other operations.

3
About The Product
⑪ 0~9 (Numbers)
Those are keys used to input numbers.
Combine with SHIFT key to activate various
functions shown on number keys. For
example, press SHIFT + 1 will turn on DIS
function of the camera.
⑫ ENT (Confirm)
It is used to confirm menu setting.
⑬ OPEN ( IRIS Open)
This key is used to activate IRIS open of the
camera. It is also a “confirm” key in a menu.
⑭ Joystick
This joystick is used to Pan, Tilt, Zoom and
Focus
Non-Menu State:
Left/Right/Up/Down: Pan/Tilt the camera
correspondingly
Twist clockwise: Zoom In,
Twist anti-clockwise: Zoom Out;
Press Zoom/ Focus Switch Key and Twist:
Focus Near/Far
Menu State:
Right: Enter a submenu or Confirm;
Left: Return to previous menu or exit (expect
some not returnable menus);
Up: Move to last option;
Down: Move to next option.
⑮ CLOSE ( IRIS Close)
This key is used to activate IRIS close of the
camera; it is “return” key in a menu.
⑯ Status Display area
This area is used to display status of functions
that are turned on, relative icons will be back
lighted.
⑰ MENU (Enter Camera Menu)
This key is used to enter camera menu.
⑱ Zoom / Focus Switch Key
This key is used to switch between zoom and
focus function.
Operation: Press this key, the crisscross of
indicator lighter near the joystick will go out,
twist the joystick to zoom in / out; press this
key again, the crisscross of indicator lighter
will be lightened, twist the joystick will adjust
focus value.
List of status and functions on Status Display Area
Icon
Explanation
Icon
Explanation
Wiper
Far & Near light (Auto)
Defogger
DIS
Heater
WDR
Auto Heating
AUX Switching (Switch Output)
Far Light (Manual)
Tracking
Near Light (Manual)

4
About The Product
Connections
There are two options of cables. Please see the instruction label at bottom of the device.
Option1: Power + Aux output + RS-485

5
About The Product
Option2: Power + RS-232 + RS-485

Operation
6
Menu operation
After powered on, “USER PIN” will show on the controller’s screen. The initial pin is “111111”.
- - - -
Enter “USER PIN”
See “PIN SETTING” to set pin.
Pin Error：When“USER PIN：ERROR” shows on screen, it indicates wrong pin was input. Enter
correct pin to get to next step
Pin Correct：Screen shows“ 1”camera icon and default camera number. If there is no further
operation for long time, screen will display current time automatically. If still no
operations, the controller will enter sleeping mode.
Enter OSD menu
Press SETUP key.
Screen shows “ADMIN PIN:”. Initial admin pin is “111111“.
- - - -
Enter “ADMIN PIN”
See “PIN SETTING” to set pin.


CAMERA SETTING 
ADMIN PIN:
USER PIN: