IOT RF Series User manual

IoT Smart Home RF Series
User’s Manual
[V1.021]

- 1 -
Table of Contents
1. Product Introduction ......................................................................................................................................... 3
1.1 8810S ........................................................................................................................................................ 3
2. Connecting the Camera to the Internet ...................................................................................................... - 4 -4
2.1 Downloading APP - “ALLCAM”........................................................................................................... - 4 -4
2.2 Power on the Camera............................................................................................................................... 5
2.3 First Time Setup.................................................................................................................................. - 5 -5
2.4 Adding a Camera (Multiple Cameras) ...................................................................................................... 7
2.5 Resetting the Camera............................................................................................................................... 9
3. Introduction to Camera Operation.................................................................................................................... 9
3.1 Live View................................................................................................................................................... 9
3.2 Camera Settings...................................................................................................................................... 10
3.3 Sensors’Diagram.................................................................................................................................... 13
3.4 Sensor Pairing ......................................................................................................................................... 15
3.5 Sensor Alarm Settings and Applications................................................................................................. 16
4. FAQ ................................................................................................................................................................... 23
5. Maintenance and Service ................................................................................................................................ 23

- 2 -
★Smart Home System is the wisdom of life, and through the IoT
Camera allows the users to check, to confirm and to feel relieved
/at ease / reassured.
★System Features：
1. Structured on an intelligent application of the Internet, low
operating costs.
2. Simple Installation and easy operation, suitable for all ages.
3. Ultra-low power and wireless sensors, a significant reduction in
the frequency of battery replacement.
4. Expandable system, a variety of wireless sensors gives coverage of
the Smart Home applications.
5. Supports multiple languages.

- 3 -
1. Product Introduction
1.1 8810S –RF IoT Camera
7
Microphone
8
USB Power
9
SD Card Slot
1
Photoresistor
2
Infrared lights
3
Lens
4
Indicator Light
5
Speaker
6
Reset Button

- 4 -
2. Connecting the Camera to the Internet
2.1 Download “ALLCAM”APP
Search for the keyword "AllCam” in Google Play/Apple Store.
Please download it and install it on your smart phone/tablet.
“AllCam”APP Welcome Screen (As Shown Below)-

- 5 -
2.2 Power on the Camera
Connect the power supply to the IoT Camera and plug it into the power outlet. The indicator light on IoT
camera will turn red. Please wait 15 seconds for the startup test.，When the indicator light flashes green
and orange, camera will be in AP-mode.
2.3 First Time Setup
2.3.1 Connecting using a Smartphone or Tablet.
1. Turn on the Wi-Fi on your Smartphone or Tablet and wait for the indicator light to flash red/green.
2. Go to your Wi-Fi settings, find and connect to “AllCam - XX：XX：XX：XX：XX：XX” and enter the default
password “12345678”.
3. Open the installed “ALLCAM”APP. When it shows the message “Do you want to connect to Wi-Fi
Router?”; if you have an internet-ready Wi-Fi router, please select “OK”. If not, please select “Cancel”;
the camera will connect to your smartphone/tablet directly, but the functions are limited to the
camera’s wireless local area and you will not receive any push notifications.
4. Select the router you would like to connect to and enter the password. After the connection is
finalized, you will no longer see the Wi-Fi AP of the camera. (If the connected router does not
restrict the use of Cameras from its network, the indicator light will turn green.)
5. Connecting the Camera to the Internet is completed.

- 6 -
Quick Reminders..
1. Wi-Fi SSID is the name of the wireless network, set by the router administrator.
2. If the Camera can not find the Wi-Fi network you wish to connect to, please make sure the camera
is within the Wi-Fi router’s effective range.
3. If you have entered the wrong password to connect to a Wi-Fi SSID, the camera will beep three
times, please close the APP and repeat step 3.
4. Please ensure your Smartphone/Tablet is on the same Wi-Fi network as the Camera.
2.3.2 Checking the Live View
1. Under the Camera List you can choose the camera you want to see the Live View of.
2. To control the PTZ, drag your finger in the Live View up, down, left or right and the camera will
rotate accordingly.
3. Please touch the live view and using the pinch-to-zoom; you adjust the zoom level in Live View.
When you turn your device to landscape; the live view will be full screen.

- 7 -
Quick Reminders..
1. Only follow the steps for moving the Camera to another Wireless Network. There’s no need to
reset the camera if it will be on the same network.
2. The previously paired sensors should remain after the relocation. In the rare occurance and it
dissappears, please re-pair the sensors.
2.3.3 Moving the Camera to another Location (Different Network)
1. Press and hold the reset button and wait for the beeps, wait for the indicator light to flash red and
green and have entered AP-Mode.
2. Repeat the steps from “Connecting using a Smartphone or Tablet.
2.4 Adding a Camera (Multiple Cameras)
2.4.1 Adding a Camera already on the Same Network
1. Connect your smart phone/tablet to your Wi-Fi Network.
2. Open the “ALLCAM”APP, click the “Add Camera”button from the Camera List. The software will
automatically search for available cameras within the Network. Select the Camera you wish to add
by clicking on the UID to enter the password and add the camera to your Camera List. (The default
password is “admin”, please change the password in Camera Options for better security.)
3. Select the Camera icon from the Camera List to see the Live View.

- 8 -
Quick Reminder..
If you entered the wrong password, simply click on the Camera Icon from the Camera List and it will
ask you to re-enter the password.
2.4.2 Adding a Remote Camera
1. Make sure your smartphone/tablet is connected to the internet.
2. Turn on the “ALLCAM”APP, click “Add Camera”, and then click “Add Remote Camera”. Under this
page, you can enter the Camera’s 20 letter UID and password into their respective boxes, then click
the checkmark to add the Camera remotely. (The default password is “admin”.)
3. Select the Camera icon from the Camera List to see the Live View.
2.4.3 Using a QR Code to Add Remote Camera (Provided by Distributors.)
1. Make sure your smartphone/tablet is connected to the internet.
2. Turn on the “ALLCAM”APP, click “Add Camera”, and then click “Add Remote Camera”. Click on “QR
Code” and scan the UID sticker’s QR Code，then enter the password. (The default password is
“admin”.)

- 9 -
Quick Reminder..
Your smartphone or tablet must have barcode scanning software installed. If you do not, please
install ”QR Code Scanner”.
2.5 Resetting the Camera
If you forgot your password it only takes one minute to reset the camera to its factory settings.
After powering on the camera for 20 seconds, hold the reset button down for five seconds and you will
hear three beeps and when the indicator lights flash red and green, it means the Camera has reset to its
factory settings. There’s no need to re-pair the sensors.
Quick Reminder..
if you do not hear the beeps, please try again after powering on the camera again.
3. Introduction to Camera Operation
3.1 Watching the Live View Online
1. Snapshot
2. Snapshot Folder : Click the icon to enter the folder
(pictured on the right)
3. Video Record / Stop Video Record（SD card required.）
4. Mute, Listen and Speak Toggle Button
5. Smart Home（IoT Devices）
6. Video Resolution：
HD：1280*720、VGA：640*360、QVGA：320*180
7. Pan Cruise (Left and Right), Tilt Cruise (Up and Down).
Click again to stop (Only available for PTZ model.)
8. Vertical Mirror Flip (Live View)
9. Horizontally Mirror Flip (Live View)
1 2 3 4 5
6
7 8 9 10