iPets PET619A-1 User manual

LIMITED 90 DAYS WARRANTY
iPets warrants this product to be free of defects in parts, materials and workmanship
for a period of 90 days, from date of purchase.
Should any repairs or servicing under this warranty be required, contact Customer
Service by phone or email for instructions on how to pack and ship the product to
iPets.
iPets CUSTOMER SERVICE
Telephone: [phone] (USA & Canada only)
Email: [e-mail]
Hours: Weekdays 9:00 AM- 6:00 PM EST
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state.
15
Common size of different dogs
Size Neck
(cm)
Chest
Measurement
(cm)
Back
Length
(cm)
Type
Mini 20-22
25-30
19 Chihuahua, Yorkshire
Termier
Small 20-24
29-36 23 Chihuahua, Yorkshire
Temier, Poodle, Pomeranian
Medium 23-28 35-42 28 Maltese Dog, Shih Tzu
Large 27-31 41-47 31 Miniature Schnauzer,
Pekingese
large 30-34 46-53 35 Schnauzer, English
Cocker Spaniel
Large 33-37 52-59 40 Beagle
47-52 88-97 65 Labrad or Retriever
52-62 92-110 70 Golden Retriever, Old
English Sheepdog
Huge 43-48 76-84 60 Husky
V20160628 EN

Table of Contents: Important Safety Information
WARNING: NOT FOR AGGRESSIVE DOGS. Do not use this product if your dog
is aggressive, or if your dog is prone to aggressive behavior, Aggressive dogs can
cause severe injury and even death to their owner and others. If you are unsure
whether this product is appropriate for your dog, please consult your veterinarian
or certified trainer.
CAUTION:
Risk of skin damage: Please read and follow the instructions carefully in this guide,
Proper fit of the collars is important because a loose collar may cause inconsistent
performance. A collar worn for too long or made too tight on the pet's neck may
cause skin damage, ranging from redness to pressure ulcers (commonly known
as bedsores). These collars can cause pressure necrosis if used incorrectly and
is often misidentified as burns.
Avoid leaving the collar on the dog for more than 12hours per day.
When possible reposition the collar on the pet's neck every 1 to 2hours.
Check the fit to prevent excessive pressure, and it is okay to trim any excess
strap length.
Never connect a lead to the electronic collar because it may cause excessive
pressure on the contacts.
Wash the dog's neck area and contacts of the collar weekly with a damp cloth.
Examine the contact area daily for signs of a rash or a sore.
If a rash or sore is found, discontinue use of the collar until the skin has healed.
If the condition persists beyond 48 hours, see your veterinarian.
These steps will help your pet safe and comfortable. Millions of pets are comfortable
while wearing stainless steel contacts. Some pets are sensitive to contact pressure.
You may find after some time that your pet is very tolerant of the collar. If so you
may relax some of these precautions. It is important to continue daily checks of
the contact area. If redness or sores are detected, discontinue use until the skin
has fully healed.
Thank you for choosing the iPets brand! You and your pet deserve a companionship
that includes memorable moments and a shared understanding together. Our
mission is to ensure your pet's safety by providing you the tools and techniques
to successfully train your pet. Should you have any queries, please contact our
customer service.
NOTE: Please charge before using the product.
Important Safety Information....................................................................... 2
Components.............................................................................................. 3
How the dog training system works?.............................................................4
Features....................................................................................................4
Key Definitions...........................................................................................5
Collar Receiver...........................................................................................6
Operating Guide.........................................................................................6
Step 1 Prepare the Remote Transmitter and Receiver Collar................... 6–
Step 2 – Pairing Collar Receiver to Transmitter........................................ 7
Step 3 Test the Training System Functions.............................................8 –
Step 5 Re-thread the collar ...................................................................11–
Frequently Asked Questions......................................................................12
Troubleshooting.......................................................................................13
Step 4 – Assemble and Fit the Collar Receiver........................................10
General Training Tips................................................................................14
LIMITED 90 DAYS WARRANTY..................................................................15
iPets CUSTOMER SERVICE......................................................................15
1 2
Remote Transmitter.................................................................................... 5

Components:
PET619-1(1 for 1)
PET619-2(1 for 2)
How the dog training system works?
iPets products are reliable, effective, and comfortable for large or small dogs.
The system assists in controlling your dog without a leash in a range up to 330
yards away! Instantly send a signal from the Remote Transmitter, which activates
your dog's Collar Receiver. The dog will receive an annoying but safe, harmless
stimulation. With correct, consistent use of this product, the dog will associate his
misbehavior with your corrections, and soon enough, you will have a well-trained
dog. This particular model features adjustable levels of stimulation, enabling the
user to tweak accordingly to the dog's temperament, removing the risk of over
stimulation.
Features
Rechargeable Remote Transmitter and Collar Receiver.
Waterproof Collar Receiver.
100 intensity levels of Vibration.
100 intensity levels of Static Shock.
Standard Tone.
Easy to use, adjustable Intensity Dial.
Simple, ergonomic design layout.
Quick and straightforward pairing process.
Range of 330 Yards.
Capable of simultaneous control of two dogs (extra receiver is purchasable).
Adjustable TPU strap to accommodate any size of dog.
Auto-off feature to conserve power when not in use to extend battery life.
Remotely turn on/off Collar Receiver.
34

Key Definitions
Remote Transmitter
1. Antenna: Transmits signal from Remote Transmitter to the Collar Receiver.
2. Indicator Light: Flashes green when any of the stimulation buttons
Will blink red if battery power is low to indicate the transmitter needs recharging.
are pressed.
6. Intensity Dial: Rotate the dial to adjust the level of vibration or static shock
stimulation from 0 to 100.
7. Toggle Switch (Dog Selection): Switches control between Collar Receiver 1
or Collar Receiver 2 (Dog 1 or Dog 2).
4. Vibration Button: Delivers vibration to a Collar Receiver, depending on the
position of the Toggle Switch.
3. Stimulation Button: Delivers electronic pulse stimulation to a Collar Receiver,
depending on the position of the Toggle Switch.
5. Sound Button: Delivers a sound to a Collar Receiver, depending on the position
of the Toggle Switch.
8. Charging Port: Charges the battery of the Remote Transmitter when connected
to a power source.
Collar Receiver
2. ON/OFF Button: Powers on/off the Collar Receiver and used for Pairing or
Synchronization of the Collar Receiver to the Remote Transmitter.
1. Contact points: Covers the electrodes, and through them electronic
stimulation is delivered.
pulse
3. Charging Port: Charges the battery of the Collar Receiver when connected to
a power source.
4. Indicating Light: Flashes green when any of the stimulations are pressed.
Will blink red if the battery power is low to indicate the Collar Receiver needs
recharging.
Operating Guide
Prepare the Remote Transmitter and Receiver Collar:
Charge the Remote Transmitter and Receiver Collar
1. Uncover the Charging Port by lifting the rubber cover.
2. Insert the charging connector into the Charging Port.
3. Plug the charger into a standard wall outlet.
4. A solid red light will appear on the Indicator Light, indicating charging
is occurring.
5. Once charging is complete, the solid red light will turn to a solid green
light.
6. Remove the charging connector, and replace the rubber cover to protect
the Charging Port.
Step
1
56
Antenna
Indicator Light
Toggle Switch
Charging Port
Stimulation Button
Vibration Button
Sound Button
Intensity Dial
Contact points
ON/OFF Button
Indicating Light
Charging Port

Step
2
Powering on and off the Remote Transmitter
There is no need to turn off the transmitter. When there is no buttons
being pressed on transmitter, the unit turns off automatically. Press any
button and the transmitter will power back on automatically.
Powering on and off the Collar Receiver
There are two ways to power on and off the Remote Collar Receiver:
Option 1:
Press the ON/OFF button on the receiver to power the unit on or off. When
the receiver is powered on, the indicating light will flash green.
Option 2:
Press and hold the Vibration and Sound Button at the same time for a
few seconds to turn on or off the receiver. Please note, this feature can
only be utilized if the distance between the transmitter and receiver is
less than 100 feet or 30 meters and the transmitter and receiver must
already be paired.
Pairing Collar Receiver to Transmitter
Note: Transmitter and receiver are pre-paired when leaving our
manufacturing facility. In case the pairing is not established or you would
like to repair the units, please follow the instructions below:
1. Power on the Collar Receiver by pressing the ON/OFF button on the
Collar Receiver.
2. Press and hold the ON/OFF button for about 3 seconds until a beep
sounds, and the indicating light will begin to flash quickly.
3. Press any button on the transmitter once the Collar Receiver beeps.
When the Remote Transmitter and Collar Receiver are paired successfully
the indicating light will stop flashing quickly.
4. If needing to pair a second Collar Receiver, follow the same steps but
first push your Toggle Switch in the other direction.
Test the Training System Functions
The testing methods will help determine whether the training system is
functioning as intended and will also teach you how to operate the system.
Please ensure that the pairing process is complete before attempting to
test the functionality.
Testing the Electronic Pulse Stimulation
Electronic Pulse Stimulation Tester
In your package that you received, you will find a clear almost translucent
plastic piece that has a light bulb/fuse in the middle of it. This is your
Electronic Pulse Stimulation tester. This component DOES NOT attach
to the Collar Receiver by any means and is only for testing the static shock
mode. To test the Electronic Pulse Stimulation, follow these steps:
1. Put the test light over the Electrodes of the Collar Receiver you wish
to test.
2. Ensure the Toggle Switch is in the correct position for the Collar Receiver
you're testing.
3. Adjust the Intensity Dial off of 100.
4. Press the Static Shock Button on your Remote Transmitter.
5. If d one c or rec tly, th e tes t bu lb sh ould fl ash o ra nge i nd ica tin g th e
ele ctr onic pu lse s ti mul ation i s ope ra tin g corre ctl y.
Step
3
8
7
Note: Before first use, charge the Remote Transmitter and Receiver Collar
until completion.
(Figure 3-1)