IPEX PH485Ux2 User manual

Doc No: PH485Ux2-UM-001
IPEX
(IP Electronix)
15 January 2022
USER’S MANUAL
PH485Ux2
#2 RS-485/RS-422 Over USB ISOLATED MULTIPORT

www.ipelectronix.com
IPEX (IP Electronix) PH485Ux2: User’s Manual
Page 2 of 27 Doc No.: PH485Ux2-UM-001
15 January 2022

www.ipelectronix.com
IPEX (IP Electronix) PH485Ux2: User’s Manual
Page 3 of 27 Doc No.: PH485Ux2-UM-001
15 January 2022
CONTENTS
1. INTRODUCTION ........................................................................ 4
2. SPECIFICATIONS ....................................................................... 5
3. PACKAGE CHECKLIST................................................................. 6
4. TOP VIEW................................................................................. 7
5. BOTTOM VIEW ......................................................................... 7
6. FRONT VIEW............................................................................. 7
7. BACK VIEW............................................................................... 7
8. INSTALLATION ON WINDOWS................................................... 8
9. MANUAL INSTALLATION ON WINDOWS.................................. 15
10. CHANGING COM PORT NUMBER .......................................... 21
11. IDENTIFYING DEVICE PORTS COM NUMBER.......................... 24
12. RS-485/RS422 SERIAL PORTS PIN CONFIGURATION .............. 24
13. RS-485 CONNECTING METHODS ........................................... 25
14. RS-422 CONNECTING METHODS ........................................... 26
15. GUARANTEE......................................................................... 27
16. TECHNICAL SUPPORT ........................................................... 27

www.ipelectronix.com
IPEX (IP Electronix) PH485Ux2: User’s Manual
Page 4 of 27 Doc No.: PH485Ux2-UM-001
15 January 2022
1. INTRODUCTION
IPEX PH485Ux2 is a USB Adapter Multiport that provides a Serial COM Ports via its USB connection
and is compatible with RS-485 standard devices differential (Data+ & Data-); and RS-422 standard
devices differential (TX+, TX- & RX+, RX-) signals. PH485Ux2 is fully Plug & Play a and enables your
laptop or workstation with the ability to communicate between a USB port and up to #2 RS-485/422
serial peripherals with baud-rate from 300bps to 230400bps simultaneously.
PH485Ux2 supports Point-to-Point and Point-to-Multi Point Party Line network topologies. Since RS-
485 is a Half-Duplex standard, switching between Transmit and Receive is doing automatically and no
further signal (such as RTS) is required.
PH485Ux2 supports a wide range power supply and is working with DC voltage between 8V to 48V.
Protection against Surge, ESD and EMI is considered in its design and also has 3kV insulation between
USB and RS-485/422 sides. Furthermore, all the ports are insulated from each other too.
PH485Ux2 is designed for industrial usage and is useful for Industrial Automation,
Telecommunications, SCADA Systems and DCS Systems …
PH485Ux2 comes complete with drivers for Microsoft Windows. Drivers are also available for Linux,
Mac OS and Android.

www.ipelectronix.com
IPEX (IP Electronix) PH485Ux2: User’s Manual
Page 5 of 27 Doc No.: PH485Ux2-UM-001
15 January 2022
2. SPECIFICATIONS
USB to RS-485 and RS-422 Bidirectional Converter;
Hi-Speed USB 2.0 supported (up to 480 Mbps);
Number of Ports: #2 RS-485/RS422 Serial Port, #1 USB Port;
Adds #2 COM Port to the PC;
Fully Plug & Play;
RS-485 Signal: Data+, Data-, GND;
RS-422 Signal: TX+, TX-, RX+, RX-, GND;
Maximum Communication Distance: 1200m (4000 feet);
Loading: RS-485 and RS-422 Side up to 32 Nodes are supported;
Self-Powered: works by 8V to 48V external DC power supply;
Serial Transmission Speed Up to 230.4 kbps;
Insulation Protection: 3kV Instantaneous, 500V DC continuous;
Serial Standard: Meets or Exceeds the Requirements of RS-485/RS-422 Standards;
RS-485/422 Parity: Even, Odd, None, Mark and Space; Selectable;
Driver Supported: Microsoft Windows, Linux, Mac OS and Android (32 & 64 Bits) Operating Systems;
Power & USB (Green) LED Indicator;
Transmit (Blue) and Receive (Yellow) LED Indicator;
ESD Protection: RS-232 Bus-Pin ESD Protection Exceeds ±15 kV Using Human-Body Model (HBM);
Dimensions: 145mm x 118mm x 27mm (5.70in x 4.65in x 1.06in);
Operating Temperature: -10°C to +70°C (+14°F to +158°F);
1 Year Guarantee and 5 Years Support.

www.ipelectronix.com
IPEX (IP Electronix) PH485Ux2: User’s Manual
Page 6 of 27 Doc No.: PH485Ux2-UM-001
15 January 2022
3. PACKAGE CHECKLIST
Before installing the PH485Ux2, verify that the package contains the following items:
1) #1 PH485Ux2 Multiport 2) #1 USB Cable
3) #1 Document and Driver CD-ROM 4) #2 DB9 Female Connector
5) #1 220V AC to 12V DC Adaptor 6) #2 Din Rail Brackets with the corresponding screws
NOTE: Notify your sales representative if any of the above items is missing or damaged.

www.ipelectronix.com
IPEX (IP Electronix) PH485Ux2: User’s Manual
Page 7 of 27 Doc No.: PH485Ux2-UM-001
15 January 2022
4. TOP VIEW
5. BOTTOM VIEW
6. FRONT VIEW
7. BACK VIEW

www.ipelectronix.com
IPEX (IP Electronix) PH485Ux2: User’s Manual
Page 8 of 27 Doc No.: PH485Ux2-UM-001
15 January 2022
8. INSTALLATION ON WINDOWS
After you plug PH485Ux2 to USB port, you can see new devices in the Device Manager window as
below:
(To run Device Manager, right click on My Computer, select Properties and then select Hardware tab,
finally click on Device Manager button like following picture or simply use "WIN-KEY + R" and then type
DEVMGMT and press Enter)

www.ipelectronix.com
IPEX (IP Electronix) PH485Ux2: User’s Manual
Page 9 of 27 Doc No.: PH485Ux2-UM-001
15 January 2022
However, installation progress will be start automatically, and following window will be seen,
Select option "No, not this time" and then click "Next",

www.ipelectronix.com
IPEX (IP Electronix) PH485Ux2: User’s Manual
Page 10 of 27 Doc No.: PH485Ux2-UM-001
15 January 2022
Select "Install from a list or specific location (Advanced)" and click "Next",
Select "Include this location in the search:" and click on "Browse",